mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Joe Perches <joe@perches.com>
To: netdev@vger.kernel.org
Cc: "Ben Hutchings" <bhutchings@solarflare.com>,
	"Szymon Janc" <szymon@janc.net.pl>,
	"Michał Mirosław" <mirqus@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 01/11] forcedeth: Change reg_delay arguments and use
Date: Mon, 29 Nov 2010 09:41:52 -0800	[thread overview]
Message-ID: <adc632efef4bb121de84eab108e5bc526a97b81f.1291051316.git.joe@perches.com> (raw)
In-Reply-To: <cover.1291051316.git.joe@perches.com>

Move the printk out of reg_delay and make
the callers emit a message on error.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/forcedeth.c |   30 ++++++++++++++----------------
 1 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 2fd1ae9..e5f9d4b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -948,7 +948,7 @@ static bool nv_optimized(struct fe_priv *np)
 }
 
 static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
-				int delay, int delaymax, const char *msg)
+		     int delay, int delaymax)
 {
 	u8 __iomem *base = get_hwbase(dev);
 
@@ -956,11 +956,8 @@ static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
 	do {
 		udelay(delay);
 		delaymax -= delay;
-		if (delaymax < 0) {
-			if (msg)
-				printk("%s", msg);
+		if (delaymax < 0)
 			return 1;
-		}
 	} while ((readl(base + offset) & mask) != target);
 	return 0;
 }
@@ -1141,9 +1138,9 @@ static int mii_rw(struct net_device *dev, int addr, int miireg, int value)
 	writel(reg, base + NvRegMIIControl);
 
 	if (reg_delay(dev, NvRegMIIControl, NVREG_MIICTL_INUSE, 0,
-			NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX, NULL)) {
+			NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX)) {
 		dprintk(KERN_DEBUG "%s: mii_rw of reg %d at PHY %d timed out.\n",
-				dev->name, miireg, addr);
+			dev->name, miireg, addr);
 		retval = -1;
 	} else if (value != MII_READ) {
 		/* it was a write operation - fewer failures are detectable */
@@ -1539,9 +1536,9 @@ static void nv_stop_rx(struct net_device *dev)
 	else
 		rx_ctrl |= NVREG_RCVCTL_RX_PATH_EN;
 	writel(rx_ctrl, base + NvRegReceiverControl);
-	reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
-			NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
-			KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
+	if (reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
+		      NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX))
+		printk(KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
 
 	udelay(NV_RXSTOP_DELAY2);
 	if (!np->mac_in_use)
@@ -1574,9 +1571,9 @@ static void nv_stop_tx(struct net_device *dev)
 	else
 		tx_ctrl |= NVREG_XMITCTL_TX_PATH_EN;
 	writel(tx_ctrl, base + NvRegTransmitterControl);
-	reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
-			NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
-			KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
+	if (reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
+		      NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX))
+		printk(KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
 
 	udelay(NV_TXSTOP_DELAY2);
 	if (!np->mac_in_use)
@@ -5190,9 +5187,10 @@ static int nv_open(struct net_device *dev)
 	writel(np->vlanctl_bits, base + NvRegVlanControl);
 	pci_push(base);
 	writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl);
-	reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
-			NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX,
-			KERN_INFO "open: SetupReg5, Bit 31 remained off\n");
+	if (reg_delay(dev, NvRegUnknownSetupReg5,
+		      NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
+		      NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX))
+		printk(KERN_INFO "open: SetupReg5, Bit 31 remained off\n");
 
 	writel(0, base + NvRegMIIMask);
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
-- 
1.7.3.2.245.g03276.dirty


  reply	other threads:[~2010-11-29 17:44 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-29 17:41 [PATCH 00/11] forcedeth: Convert to use netdev_<level> and neatening Joe Perches
2010-11-29 17:41 ` Joe Perches [this message]
2010-11-29 17:41 ` [PATCH 02/11] forcedeth: convert dprintk(KERN_DEBUG to netdev_dbg Joe Perches
2010-11-29 17:41 ` [PATCH 03/11] forcedeth: Use print_hex_dump Joe Perches
2010-11-29 17:41 ` [PATCH 04/11] forcedeth: Convert remaining dprintk to netdev_dbg Joe Perches
2010-11-29 17:41 ` [PATCH 05/11] forcedeth: Use pr_fmt and pr_<level> Joe Perches
2010-11-29 17:41 ` [PATCH 06/11] forcedeth: Convert pr_<level> to netdev_<level> Joe Perches
2010-11-29 17:41 ` [PATCH 07/11] forcedeth: Add function init_realtek_8211b Joe Perches
2010-11-29 17:41 ` [PATCH 08/11] forcedeth: Separate vendor specific initializations into functions Joe Perches
2010-11-29 17:42 ` [PATCH 09/11] forcedeth: Convert dev_printk(<level> to dev_<level>( Joe Perches
2010-11-29 17:42 ` [PATCH 10/11] forcedeth: Remove netdev_dbg uses Joe Perches
2010-11-29 17:42 ` [PATCH 11/11] forcedeth: Use netdev_dbg for printk(KERN_DEBUG Joe Perches
2010-11-29 19:51 ` [PATCH 00/11] forcedeth: Convert to use netdev_<level> and neatening David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=adc632efef4bb121de84eab108e5bc526a97b81f.1291051316.git.joe@perches.com \
    --to=joe@perches.com \
    --cc=bhutchings@solarflare.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mirqus@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=szymon@janc.net.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®