From: Komal Bajaj <quic_kbajaj@quicinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Melody Olvera" <quic_molvera@quicinc.com>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: qcom: qdu/qru1000-idp: Fix the voltage setting
Date: Thu, 13 Jun 2024 17:13:00 +0530 [thread overview]
Message-ID: <ae289c19-2701-d00f-3f6f-5e87ec37e475@quicinc.com> (raw)
In-Reply-To: <CAA8EJpp9U-ucMAiNmVvWDuupd=OR_fLK9fQ+n21SVmktWMxhmA@mail.gmail.com>
On 5/24/2024 2:59 PM, Dmitry Baryshkov wrote:
> On Fri, 24 May 2024 at 11:23, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>>
>> While adding the USB support, it was found that the configuration
>> for regulator smps5 was incorrectly set. Upon cross verifying for
>> all the regulators, found that smps4, smps6 and smps8 are also
>> incorrectly configured. This patch fixes the same.
>
> Nit: see Documentation/process/submitting-patches.rst, "This patch..."
Will update the commit message.
>
>> In particular -
>> - smps4 is 1.574V min and 2.04V max
>> - smps5 is 1.2V min and 1.4V max
>> - smps6 is 0.382V min and 1.12V max
>
> Just for my understanding, will anything further constraint these values?
As far as i know, this is going to be final.
currently, usb device is not working without this min/max change.
Thanks
Komal
>
>> - smps8 is fixed at 0.752V
>>
>> Fixes: d1f2cfe2f669 ("arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs")
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>> Changes in v2-
>> * Updated the commit message as suggested by Krzysztof
>> * Link to v1: https://lore.kernel.org/linux-arm-msm/20240514131038.28036-1-quic_kbajaj@quicinc.com/
>> ---
>>
>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 16 ++++++++--------
>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 16 ++++++++--------
>> 2 files changed, 16 insertions(+), 16 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> index 6e129dc123ed..89b84fb0f70a 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> @@ -96,20 +96,20 @@ vreg_s3a_1p05: smps3 {
>>
>> vreg_s4a_1p8: smps4 {
>> regulator-name = "vreg_s4a_1p8";
>> - regulator-min-microvolt = <1800000>;
>> - regulator-max-microvolt = <1800000>;
>> + regulator-min-microvolt = <1574000>;
>> + regulator-max-microvolt = <2040000>;
>> };
>>
>> vreg_s5a_2p0: smps5 {
>> regulator-name = "vreg_s5a_2p0";
>> - regulator-min-microvolt = <1904000>;
>> - regulator-max-microvolt = <2000000>;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1400000>;
>> };
>>
>> vreg_s6a_0p9: smps6 {
>> regulator-name = "vreg_s6a_0p9";
>> - regulator-min-microvolt = <920000>;
>> - regulator-max-microvolt = <1128000>;
>> + regulator-min-microvolt = <382000>;
>> + regulator-max-microvolt = <1120000>;
>> };
>>
>> vreg_s7a_1p2: smps7 {
>> @@ -120,8 +120,8 @@ vreg_s7a_1p2: smps7 {
>>
>> vreg_s8a_1p3: smps8 {
>> regulator-name = "vreg_s8a_1p3";
>> - regulator-min-microvolt = <1352000>;
>> - regulator-max-microvolt = <1352000>;
>> + regulator-min-microvolt = <752000>;
>> + regulator-max-microvolt = <752000>;
>> };
>>
>> vreg_l1a_0p91: ldo1 {
>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> index 2a862c83309e..258483af065b 100644
>> --- a/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>> @@ -96,20 +96,20 @@ vreg_s3a_1p05: smps3 {
>>
>> vreg_s4a_1p8: smps4 {
>> regulator-name = "vreg_s4a_1p8";
>> - regulator-min-microvolt = <1800000>;
>> - regulator-max-microvolt = <1800000>;
>> + regulator-min-microvolt = <1574000>;
>> + regulator-max-microvolt = <2040000>;
>> };
>>
>> vreg_s5a_2p0: smps5 {
>> regulator-name = "vreg_s5a_2p0";
>> - regulator-min-microvolt = <1904000>;
>> - regulator-max-microvolt = <2000000>;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1400000>;
>> };
>>
>> vreg_s6a_0p9: smps6 {
>> regulator-name = "vreg_s6a_0p9";
>> - regulator-min-microvolt = <920000>;
>> - regulator-max-microvolt = <1128000>;
>> + regulator-min-microvolt = <382000>;
>> + regulator-max-microvolt = <1120000>;
>> };
>>
>> vreg_s7a_1p2: smps7 {
>> @@ -120,8 +120,8 @@ vreg_s7a_1p2: smps7 {
>>
>> vreg_s8a_1p3: smps8 {
>> regulator-name = "vreg_s8a_1p3";
>> - regulator-min-microvolt = <1352000>;
>> - regulator-max-microvolt = <1352000>;
>> + regulator-min-microvolt = <752000>;
>> + regulator-max-microvolt = <752000>;
>> };
>>
>> vreg_l1a_0p91: ldo1 {
>> --
>> 2.42.0
>>
>>
>
>
next prev parent reply other threads:[~2024-06-13 11:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-24 8:22 Komal Bajaj
2024-05-24 9:29 ` Dmitry Baryshkov
2024-06-13 11:43 ` Komal Bajaj [this message]
2024-06-13 11:51 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ae289c19-2701-d00f-3f6f-5e87ec37e475@quicinc.com \
--to=quic_kbajaj@quicinc.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_molvera@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®