From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E59A3C282D7 for ; Wed, 30 Jan 2019 10:59:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id AB49720882 for ; Wed, 30 Jan 2019 10:59:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="u6leFQmD" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730515AbfA3K7m (ORCPT ); Wed, 30 Jan 2019 05:59:42 -0500 Received: from fllv0016.ext.ti.com ([198.47.19.142]:54810 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727043AbfA3K7l (ORCPT ); Wed, 30 Jan 2019 05:59:41 -0500 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id x0UAxecV043679; Wed, 30 Jan 2019 04:59:40 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1548845980; bh=EFtkR3WDKYT/YKyFnXxBfyIzPsZfu/dzq8mTFGbnCyc=; h=Subject:To:CC:References:From:Date:In-Reply-To; b=u6leFQmDryo1gttw9AT1LUsA4paAlVGpU1H01rtV0r/tRmMolJXWXB6XWwAKJoifr jV4mzFvLXAv+ocKX2nYDFN6GoXQ/8F7vZzavlF1w1F8dw/2ck1ps2i/qeIyDTAt9My rzcIWfO3n02lty8Cbb7eJGdWMvHAo6VzhL78gWWA= Received: from DFLE109.ent.ti.com (dfle109.ent.ti.com [10.64.6.30]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id x0UAxerh112727 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 30 Jan 2019 04:59:40 -0600 Received: from DFLE110.ent.ti.com (10.64.6.31) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1591.10; Wed, 30 Jan 2019 04:59:39 -0600 Received: from dlep33.itg.ti.com (157.170.170.75) by DFLE110.ent.ti.com (10.64.6.31) with Microsoft SMTP Server (version=TLS1_0, cipher=TLS_RSA_WITH_AES_256_CBC_SHA) id 15.1.1591.10 via Frontend Transport; Wed, 30 Jan 2019 04:59:39 -0600 Received: from [172.24.190.233] (ileax41-snat.itg.ti.com [10.172.224.153]) by dlep33.itg.ti.com (8.14.3/8.13.8) with ESMTP id x0UAxbx3011940; Wed, 30 Jan 2019 04:59:38 -0600 Subject: Re: [PATCH] phy: ti-pipe3: Add set_mode callback to configure usb3 phy as pcie phy To: Roger Quadros CC: , References: <20190124104822.22411-1-kishon@ti.com> <5C5180FF.1050409@ti.com> From: Kishon Vijay Abraham I Message-ID: Date: Wed, 30 Jan 2019 16:29:05 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.2.1 MIME-Version: 1.0 In-Reply-To: <5C5180FF.1050409@ti.com> Content-Type: text/plain; charset="windows-1252" Content-Language: en-US Content-Transfer-Encoding: 7bit X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Roger, On 30/01/19 4:18 PM, Roger Quadros wrote: > Hi Kishon, > > On 24/01/19 12:48, Kishon Vijay Abraham I wrote: >> DRA72 platform has the second instance of PHY shared between USB3 >> controller and PCIe controller with default as USB3 controller. >> Since it is used with USB3 controller by default, it uses the >> compatible specific to USB (ti,omap-usb3). >> >> Populate set_mode callback so that the USB3 PHY can be configured >> to be used with PCIe controller. > > What is the use case of this? At what point and who decides the > phy_set_mode() to be called with USB vs PCIe? The PHY by default is configured to be used with USB controller (That's why it has a compatible of ti,omap-usb3). However there is a special case where this PHY has to be used PCIe controller. So the set_mode() will help the PHY driver to configure the USB PHY to be used with PCIe controller. This is not a shared PHY, so the PHY as such can be used only with USB or PCIe and is determined at designtime. > > >> >> Signed-off-by: Kishon Vijay Abraham I >> --- >> drivers/phy/ti/phy-ti-pipe3.c | 66 ++++++++++++++++++++++++++++------- >> 1 file changed, 54 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c >> index 68ce4a082b9b..8c98f366416d 100644 >> --- a/drivers/phy/ti/phy-ti-pipe3.c >> +++ b/drivers/phy/ti/phy-ti-pipe3.c >> @@ -56,6 +56,12 @@ >> >> #define SATA_PLL_SOFT_RESET BIT(18) >> >> +#define PHY_RX_ANA_PRGRAMMABILITY_REG 0xC >> +#define MEM_EN_PLLBYP BIT(7) >> + >> +#define PHY_TX_TEST_CONFIG 0x2C >> +#define MEM_ENTESTCLK BIT(31) >> + >> #define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 >> #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 >> >> @@ -110,6 +116,8 @@ >> #define PLL_IDLE_TIME 100 /* in milliseconds */ >> #define PLL_LOCK_TIME 100 /* in milliseconds */ >> >> +#define PIPE3_PHY_DISABLE_SYNC_POWER BIT(4) >> + >> struct pipe3_dpll_params { >> u16 m; >> u8 n; >> @@ -141,6 +149,7 @@ struct ti_pipe3 { >> unsigned int power_reg; /* power reg. index within syscon */ >> unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ >> bool sata_refclk_enabled; >> + u32 mode; >> }; >> >> static struct pipe3_dpll_map dpll_map_usb[] = { >> @@ -233,7 +242,10 @@ static int ti_pipe3_power_on(struct phy *x) >> rate = rate / 1000000; >> mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | >> OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; >> - val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; >> + val = PIPE3_PHY_TX_RX_POWERON; >> + if (phy->mode == PHY_MODE_PCIE) >> + val |= PIPE3_PHY_DISABLE_SYNC_POWER; >> + val <<= PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; >> val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; >> >> ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, >> @@ -328,13 +340,11 @@ static void ti_pipe3_calibrate(struct ti_pipe3 *phy) >> ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val); >> } >> >> -static int ti_pipe3_init(struct phy *x) >> +static int ti_pipe3_pcie_init(struct ti_pipe3 *phy) >> { >> - struct ti_pipe3 *phy = phy_get_drvdata(x); >> - u32 val; >> int ret = 0; >> + u32 val; >> >> - ti_pipe3_enable_clocks(phy); >> /* >> * Set pcie_pcs register to 0x96 for proper functioning of phy >> * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table >> @@ -353,10 +363,31 @@ static int ti_pipe3_init(struct phy *x) >> return ret; >> >> ti_pipe3_calibrate(phy); >> - >> - return 0; >> + } else { >> + val = ti_pipe3_readl(phy->phy_rx, >> + PHY_RX_ANA_PRGRAMMABILITY_REG); >> + val |= MEM_EN_PLLBYP; >> + ti_pipe3_writel(phy->phy_rx, PHY_RX_ANA_PRGRAMMABILITY_REG, >> + val); >> + val = ti_pipe3_readl(phy->phy_tx, PHY_TX_TEST_CONFIG); >> + val |= MEM_ENTESTCLK; >> + ti_pipe3_writel(phy->phy_tx, PHY_TX_TEST_CONFIG, val); >> } >> >> + return 0; >> +} >> + >> +static int ti_pipe3_init(struct phy *x) >> +{ >> + struct ti_pipe3 *phy = phy_get_drvdata(x); >> + u32 val; >> + int ret = 0; >> + >> + ti_pipe3_enable_clocks(phy); >> + >> + if (phy->mode == PHY_MODE_PCIE) >> + return ti_pipe3_pcie_init(phy); >> + >> /* Bring it out of IDLE if it is IDLE */ >> val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); >> if (val & PLL_IDLE) { >> @@ -395,7 +426,7 @@ static int ti_pipe3_exit(struct phy *x) >> return 0; >> >> /* PCIe doesn't have internal DPLL */ >> - if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { >> + if (!(phy->mode == PHY_MODE_PCIE)) { >> /* Put DPLL in IDLE mode */ >> val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); >> val |= PLL_IDLE; >> @@ -429,11 +460,25 @@ static int ti_pipe3_exit(struct phy *x) >> >> return 0; >> } >> + >> +static int ti_pipe3_set_mode(struct phy *x, enum phy_mode mode, int submode) >> +{ >> + struct ti_pipe3 *phy = phy_get_drvdata(x); >> + >> + if (phy->mode != PHY_MODE_INVALID) >> + return -EBUSY; >> + >> + phy->mode = mode; > > You are only saving the mode. But not really switching modes here. > How is this intended to work? The PHY doesn't have a specific mode. Rather it is a set of configurations required to operate in a particular mode. This mode value will be used in other init, power_on callback functions. Thanks Kishon