From: Suraj Jaiswal <quic_jsuraj@quicinc.com>
To: Serge Semin <fancer.lancer@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Bhupesh Sharma <bhupesh.sharma@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
"Jose Abreu" <joabreu@synopsys.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
<netdev@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
Prasad Sodagudi <psodagud@quicinc.com>,
Andrew Halaney <ahalaney@redhat.com>,
Rob Herring <robh@kernel.org>, <kernel@quicinc.com>
Subject: Re: [PATCH net-next v8 3/3] net: stmmac: Add driver support for DWMAC5 common safety IRQ
Date: Fri, 22 Dec 2023 14:13:49 +0530 [thread overview]
Message-ID: <aec2dc6a-ffa4-4753-a764-77dfe1af995a@quicinc.com> (raw)
In-Reply-To: <yromhtr73rwsr6hizr4tq37vfvyzfue7wzpmufqyscwspzffza@uhfcrn573acd>
HI Serge,
please find commnet inline.
Thanks
Suraj
On 12/21/2023 6:19 PM, Serge Semin wrote:
> Hi Suraj
>
> On Thu, Dec 21, 2023 at 01:06:20PM +0530, Suraj Jaiswal wrote:
>> Add support to listen HW safety IRQ like ECC(error
>> correction code), DPP(data path parity), FSM(finite state
>> machine) fault in common IRQ line.
>>
>> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
>
> Thanks for taking my notes into account. One more comment is further
> below.
>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/common.h | 1 +
>> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 ++
>> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 37 +++++++++++++++++++
>> .../ethernet/stmicro/stmmac/stmmac_platform.c | 8 ++++
>> 4 files changed, 49 insertions(+)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
>> index 721c1f8e892f..b9233b09b80f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>> @@ -344,6 +344,7 @@ enum request_irq_err {
>> REQ_IRQ_ERR_ALL,
>> REQ_IRQ_ERR_TX,
>> REQ_IRQ_ERR_RX,
>> + REQ_IRQ_ERR_SFTY,
>> REQ_IRQ_ERR_SFTY_UE,
>> REQ_IRQ_ERR_SFTY_CE,
>> REQ_IRQ_ERR_LPI,
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> index 9f89acf31050..ca3d93851bed 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> @@ -31,6 +31,7 @@ struct stmmac_resources {
>> int wol_irq;
>> int lpi_irq;
>> int irq;
>> + int sfty_irq;
>> int sfty_ce_irq;
>> int sfty_ue_irq;
>> int rx_irq[MTL_MAX_RX_QUEUES];
>> @@ -297,6 +298,7 @@ struct stmmac_priv {
>> void __iomem *ptpaddr;
>> void __iomem *estaddr;
>> unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
>> + int sfty_irq;
>> int sfty_ce_irq;
>> int sfty_ue_irq;
>> int rx_irq[MTL_MAX_RX_QUEUES];
>> @@ -305,6 +307,7 @@ struct stmmac_priv {
>> char int_name_mac[IFNAMSIZ + 9];
>> char int_name_wol[IFNAMSIZ + 9];
>> char int_name_lpi[IFNAMSIZ + 9];
>> + char int_name_sfty[IFNAMSIZ + 10];
>> char int_name_sfty_ce[IFNAMSIZ + 10];
>> char int_name_sfty_ue[IFNAMSIZ + 10];
>> char int_name_rx_irq[MTL_MAX_TX_QUEUES][IFNAMSIZ + 14];
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 47de466e432c..7d4e827dfeab 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -3592,6 +3592,10 @@ static void stmmac_free_irq(struct net_device *dev,
>> if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
>> free_irq(priv->wol_irq, dev);
>> fallthrough;
>> + case REQ_IRQ_ERR_SFTY:
>> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq)
>> + free_irq(priv->sfty_irq, dev);
>> + fallthrough;
>> case REQ_IRQ_ERR_WOL:
>> free_irq(dev->irq, dev);
>> fallthrough;
>> @@ -3661,6 +3665,23 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
>> }
>> }
>>
>> + /* Request the common Safety Feature Correctible/Uncorrectible
>> + * Error line in case of another line is used
>> + */
>> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
>> + int_name = priv->int_name_sfty;
>> + sprintf(int_name, "%s:%s", dev->name, "safety");
>> + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
>> + 0, int_name, dev);
>> + if (unlikely(ret < 0)) {
>> + netdev_err(priv->dev,
>> + "%s: alloc sfty MSI %d (error: %d)\n",
>> + __func__, priv->sfty_irq, ret);
>> + irq_err = REQ_IRQ_ERR_SFTY;
>> + goto irq_error;
>> + }
>> + }
>> +
>> /* Request the Safety Feature Correctible Error line in
>> * case of another line is used
>> */
>> @@ -3798,6 +3819,21 @@ static int stmmac_request_irq_single(struct net_device *dev)
>> }
>> }
>>
>> + /* Request the common Safety Feature Correctible/Uncorrectible
>> + * Error line in case of another line is used
>> + */
>> + if (priv->sfty_irq > 0 && priv->sfty_irq != dev->irq) {
>
>> + ret = request_irq(priv->sfty_irq, stmmac_safety_interrupt,
>> + IRQF_SHARED, dev->name, dev);
>
> Just noticed yesterday that stmmac_safety_interrupt() is also called
> from the stmmac_interrupt() handler which is supposed to be registered
> on the generic "mac" IRQ. Won't it cause races around the CSRs
> (doubtfully but still worth to note) and the errors handling
> (stmmac_global_err()) in case if both IRQs are raised simultaneously?
> At the very least it looks suspicious and worth double-checking.
>
> I also found out that nobody seemed to care that the same handler is
> registered on MAC, WoL and LPI IRQ lines. Hmm, no race-related
> problems have been reported so far for the platforms with separate
> WoL/LPI IRQs. It's either a lucky coincident or the IRQs are always
> assigned to the same CPU or the IRQs handle is indeed free of races.
> In anyway it looks suspicious too. At the very least AFAICS the DMA
> IRQ-handler is indeed racy on the status CSR access. It isn't
> cleared-on-read, but write-one-to-clear. So the statistics might be
> calculated more than once for the same CSR state. There might be some
> other problems I failed to spot on the first glance.
>
> David, Eric, Jacub, Paolo, your opinion about the note above?
>
> -Serge(y)
>
<Suraj> We are adding common IRQ similar to already present code for correcteable/uncorrecable https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c#L3592.
Also, we need the sfty IRQ handling as soon as the fault occured & that can only be handled if we have handler attached with sfty IRQ.
stmmac_interrupt() will only be triggerd when interrupt triggered for rx/tx packet .
while registerting with sfty IRQ will get triggered as soon as emac HW detect the fault.
>> + if (unlikely(ret < 0)) {
>> + netdev_err(priv->dev,
>> + "%s: ERROR: allocating the sfty IRQ %d (%d)\n",
>> + __func__, priv->sfty_irq, ret);
>> + irq_err = REQ_IRQ_ERR_SFTY;
>> + goto irq_error;
>> + }
>> + }
>> +
>> return 0;
>>
>> irq_error:
>> @@ -7462,6 +7498,7 @@ int stmmac_dvr_probe(struct device *device,
>> priv->dev->irq = res->irq;
>> priv->wol_irq = res->wol_irq;
>> priv->lpi_irq = res->lpi_irq;
>> + priv->sfty_irq = res->sfty_irq;
>> priv->sfty_ce_irq = res->sfty_ce_irq;
>> priv->sfty_ue_irq = res->sfty_ue_irq;
>> for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> index 70eadc83ca68..ab250161fd79 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>> @@ -743,6 +743,14 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
>> dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
>> }
>>
>> + stmmac_res->sfty_irq =
>> + platform_get_irq_byname_optional(pdev, "sfty");
>> + if (stmmac_res->sfty_irq < 0) {
>> + if (stmmac_res->sfty_irq == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>> + dev_info(&pdev->dev, "IRQ safety IRQ not found\n");
>> + }
>> +
>> stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
>>
>> return PTR_ERR_OR_ZERO(stmmac_res->addr);
>> --
>> 2.25.1
>>
>>
next prev parent reply other threads:[~2023-12-22 8:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-21 7:36 [PATCH net-next v8 0/3] Ethernet DWMAC5 fault IRQ support Suraj Jaiswal
2023-12-21 7:36 ` [PATCH net-next v8 1/3] dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p Suraj Jaiswal
2023-12-21 7:36 ` [PATCH net-next v8 2/3] arm64: dts: qcom: sa8775p: enable safety IRQ Suraj Jaiswal
2023-12-21 7:36 ` [PATCH net-next v8 3/3] net: stmmac: Add driver support for DWMAC5 common " Suraj Jaiswal
2023-12-21 12:49 ` Serge Semin
2023-12-22 8:43 ` Suraj Jaiswal [this message]
2023-12-22 14:35 ` Serge Semin
2023-12-26 11:10 ` Suraj Jaiswal
2023-12-27 11:03 ` Suraj Jaiswal
2024-01-07 19:53 ` Serge Semin
2024-01-08 10:57 ` Suraj Jaiswal
2024-01-09 21:40 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aec2dc6a-ffa4-4753-a764-77dfe1af995a@quicinc.com \
--to=quic_jsuraj@quicinc.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=bhupesh.sharma@linaro.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kernel@quicinc.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=psodagud@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®