From: Mario Limonciello <mario.limonciello@amd.com>
To: Perry Yuan <perry.yuan@amd.com>, gautham.shenoy@amd.com
Cc: rafael.j.wysocki@intel.com, viresh.kumar@linaro.org,
Ray.Huang@amd.com, Borislav.Petkov@amd.com,
Alexander.Deucher@amd.com, Xinmei.Huang@amd.com,
Xiaojian.Du@amd.com, Li.Meng@amd.com, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 10/10] cpufreq: amd-pstate: automatically load pstate driver by default
Date: Tue, 11 Jun 2024 14:35:23 -0500 [thread overview]
Message-ID: <aecb3986-aa2e-4725-b08b-473b35ca8221@amd.com> (raw)
In-Reply-To: <39b55abeb278d9ae1688c0b87cb7ec8a3e37932a.1718095377.git.perry.yuan@amd.com>
On 6/11/2024 03:52, Perry Yuan wrote:
> If the `amd-pstate` driver is not loaded automatically by default,
> it is because the kernel command line parameter has not been added.
> To resolve this issue, it is necessary to call the `amd_pstate_set_driver()`
> function to enable the desired mode (passive/active/guided) before registering
> the driver instance.
> This ensures that the driver is loaded correctly without relying on the kernel
> command line parameter.
>
> Meanwhle, user can add driver mode in command line which will override
> the kernel config default option.
>
> [ 0.917789] usb usb6: Manufacturer: Linux 6.9.0-rc6-amd-pstate-new-fix-v1 xhci-hcd
> [ 0.982579] amd_pstate: failed to register with return -22
This is currently "intended" behavior. There is a comment remaining in
the driver at the moment not part of this patch:
/*
* TODO: We need more time to fine tune processors with shared memory
solution
* with community together.
*
* There are some performance drops on the CPU benchmarks which reports
from
* Suse. We are co-working with them to fine tune the shared memory
solution. So
* we disable it by default to go acpi-cpufreq on these processors and
add a
* module parameter to be able to enable it manually for debugging.
*/
Would you say that the performance drops are worked out on the shared
memory designs?
* If so; this comment should be dropped too in this patch.
* If not; this patch really shouldn't be done as is.
>
> Reported-by: Andrei Amuraritei <andamu@posteo.net>
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218705
> Signed-off-by: Perry Yuan <perry.yuan@amd.com>
> ---
> drivers/cpufreq/amd-pstate.c | 27 ++++++++++++++++++---------
> 1 file changed, 18 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index fa486dfaa7e8..6e5c398810bf 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -1841,28 +1841,37 @@ static int __init amd_pstate_init(void)
> /* check if this machine need CPPC quirks */
> dmi_check_system(amd_pstate_quirks_table);
>
> - switch (cppc_state) {
> - case AMD_PSTATE_UNDEFINED:
> + /*
> + * get driver mode for loading from command line choice or kernel config
> + * cppc_state will be AMD_PSTATE_UNDEFINED if no command line input
> + * command line choice will override the kconfig option
> + */
> + if (cppc_state == AMD_PSTATE_UNDEFINED) {
> + pr_err("pyuan cppc_state == AMD_PSTATE_UNDEFINED \n");
Looks like a debug line escaped into the patch.
> /* Disable on the following configs by default:
> * 1. Undefined platforms
> * 2. Server platforms
> * 3. Shared memory designs
> */
> if (amd_pstate_acpi_pm_profile_undefined() ||
> - amd_pstate_acpi_pm_profile_server() ||
> - !cpu_feature_enabled(X86_FEATURE_CPPC)) {
> + amd_pstate_acpi_pm_profile_server()) {
> pr_info("driver load is disabled, boot with specific mode to enable this\n");
> return -ENODEV;
> }
> - ret = amd_pstate_set_driver(CONFIG_X86_AMD_PSTATE_DEFAULT_MODE);
> - if (ret)
> - return ret;
> - break;
> + /* get driver mode from kernel config option [1:4] */
> + cppc_state = CONFIG_X86_AMD_PSTATE_DEFAULT_MODE;
> + }
> +
> + switch (cppc_state) {
> case AMD_PSTATE_DISABLE:
> + pr_info("driver load is disabled, boot with specific mode to enable this\n");
> return -ENODEV;
> case AMD_PSTATE_PASSIVE:
> case AMD_PSTATE_ACTIVE:
> case AMD_PSTATE_GUIDED:
> + ret = amd_pstate_set_driver(cppc_state);
> + if (ret)
> + return ret;
> break;
> default:
> return -EINVAL;
> @@ -1883,7 +1892,7 @@ static int __init amd_pstate_init(void)
> /* enable amd pstate feature */
> ret = amd_pstate_enable(true);
> if (ret) {
> - pr_err("failed to enable with return %d\n", ret);
> + pr_err("failed to enable driver mode(%d)\n", cppc_state);
> return ret;
> }
>
next prev parent reply other threads:[~2024-06-11 19:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 8:52 [PATCH v3 00/10] AMD Pstate Driver Fixes and Improvements Perry Yuan
2024-06-11 8:52 ` [PATCH v3 01/10] cpufreq: amd-pstate: optimize the initial frequency values verification Perry Yuan
2024-06-11 18:50 ` Mario Limonciello
2024-06-11 8:52 ` [PATCH v3 02/10] cpufreq: amd-pstate: remove unused variable nominal_freq Perry Yuan
2024-06-11 18:50 ` Mario Limonciello
2024-06-11 8:52 ` [PATCH v3 03/10] cpufreq: amd-pstate: show CPPC debug message if CPPC is not supported Perry Yuan
2024-06-11 18:50 ` Mario Limonciello
2024-06-11 8:52 ` [PATCH v3 04/10] cpufreq: amd-pstate: add debug message while CPPC is supported and disabled by SBIOS Perry Yuan
2024-06-11 19:00 ` Mario Limonciello
2024-06-12 8:04 ` Gautham R.Shenoy
2024-06-11 8:52 ` [PATCH v3 05/10] Documentation: PM: amd-pstate: add debugging section for driver loading failure Perry Yuan
2024-06-11 19:06 ` Mario Limonciello
2024-06-11 8:52 ` [PATCH v3 06/10] Documentation: PM: amd-pstate: add guided mode to the Operation mode Perry Yuan
2024-06-12 8:12 ` Gautham R.Shenoy
2024-06-11 8:52 ` [PATCH v3 07/10] cpufreq: amd-pstate: switch boot_cpu_has() to cpu_feature_enabled() Perry Yuan
2024-06-12 8:14 ` Gautham R.Shenoy
2024-06-11 8:52 ` [PATCH v3 08/10] x86/cpufeatures: Add feature bits for AMD heterogeneous processor Perry Yuan
2024-06-11 10:52 ` Borislav Petkov
2024-06-11 14:31 ` Mario Limonciello
2024-06-11 14:39 ` Borislav Petkov
2024-06-13 8:59 ` Yuan, Perry
2024-06-13 9:35 ` Borislav Petkov
2024-06-11 8:52 ` [PATCH v3 09/10] cpufreq: amd-pstate: implement heterogeneous core topology for highest performance initialization Perry Yuan
2024-06-11 19:29 ` Mario Limonciello
2024-06-13 7:13 ` Gautham R.Shenoy
2024-06-13 8:25 ` Yuan, Perry
2024-06-11 8:52 ` [PATCH v3 10/10] cpufreq: amd-pstate: automatically load pstate driver by default Perry Yuan
2024-06-11 19:35 ` Mario Limonciello [this message]
2024-06-13 8:19 ` Gautham R.Shenoy
2024-06-13 8:44 ` Yuan, Perry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aecb3986-aa2e-4725-b08b-473b35ca8221@amd.com \
--to=mario.limonciello@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Li.Meng@amd.com \
--cc=Ray.Huang@amd.com \
--cc=Xiaojian.Du@amd.com \
--cc=Xinmei.Huang@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=perry.yuan@amd.com \
--cc=rafael.j.wysocki@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome