From: Imre Deak <imre.deak@nokia.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Krzysztof Helt <krzysztof.h1@poczta.fm>,
Antonino Daplas <adaplas@gmail.com>,
Tony Lindgren <tony@atomide.com>,
Tomi Valkeinen <Tomi.Valkeinen@nokia.com>
Subject: [PATCH 07/20] omapfb: Add support for the OMAP3 EVM LCD
Date: Wed, 24 Jun 2009 14:33:32 +0300 [thread overview]
Message-ID: <af3d1e0dff22f0bb72f6ccee57dfa9a1e5f31abb.1245842329.git.imre.deak@nokia.com> (raw)
In-Reply-To: <0e2b7b0555c657a8eab00df0091b9828fb292f4c.1245842329.git.imre.deak@nokia.com>
In-Reply-To: <34904fad6190ff9d35eb942460ece639f4b7d58f.1245842329.git.imre.deak@nokia.com>
From: Steve Sakoman <steve@sakoman.com>
Add LCD support for OMAP3 EVM
Backlight support by Arun C <arunedarath@mistralsolutions.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Acked-by: Syed Mohammed Khasim <khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
---
drivers/video/omap/Makefile | 1 +
drivers/video/omap/lcd_omap3evm.c | 192 +++++++++++++++++++++++++++++++++++++
2 files changed, 193 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/omap/lcd_omap3evm.c
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 96d2d43..4345157 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -30,6 +30,7 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o
+objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
new file mode 100644
index 0000000..b6a4c2c
--- /dev/null
+++ b/drivers/video/omap/lcd_omap3evm.c
@@ -0,0 +1,192 @@
+/*
+ * LCD panel support for the TI OMAP3 EVM board
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * Derived from drivers/video/omap/lcd-apollon.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/mux.h>
+#include <mach/omapfb.h>
+#include <asm/mach-types.h>
+
+#define LCD_PANEL_ENABLE_GPIO 153
+#define LCD_PANEL_LR 2
+#define LCD_PANEL_UD 3
+#define LCD_PANEL_INI 152
+#define LCD_PANEL_QVGA 154
+#define LCD_PANEL_RESB 155
+
+#define ENABLE_VDAC_DEDICATED 0x03
+#define ENABLE_VDAC_DEV_GRP 0x20
+#define ENABLE_VPLL2_DEDICATED 0x05
+#define ENABLE_VPLL2_DEV_GRP 0xE0
+
+#define TWL_LED_LEDEN 0x00
+#define TWL_PWMA_PWMAON 0x00
+#define TWL_PWMA_PWMAOFF 0x01
+
+static unsigned int bklight_level;
+
+static int omap3evm_panel_init(struct lcd_panel *panel,
+ struct omapfb_device *fbdev)
+{
+ gpio_request(LCD_PANEL_LR, "LCD lr");
+ gpio_request(LCD_PANEL_UD, "LCD ud");
+ gpio_request(LCD_PANEL_INI, "LCD ini");
+ gpio_request(LCD_PANEL_RESB, "LCD resb");
+ gpio_request(LCD_PANEL_QVGA, "LCD qvga");
+
+ gpio_direction_output(LCD_PANEL_RESB, 1);
+ gpio_direction_output(LCD_PANEL_INI, 1);
+ gpio_direction_output(LCD_PANEL_QVGA, 0);
+ gpio_direction_output(LCD_PANEL_LR, 1);
+ gpio_direction_output(LCD_PANEL_UD, 1);
+
+ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
+ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
+ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
+ bklight_level = 100;
+
+ return 0;
+}
+
+static void omap3evm_panel_cleanup(struct lcd_panel *panel)
+{
+ gpio_free(LCD_PANEL_QVGA);
+ gpio_free(LCD_PANEL_RESB);
+ gpio_free(LCD_PANEL_INI);
+ gpio_free(LCD_PANEL_UD);
+ gpio_free(LCD_PANEL_LR);
+}
+
+static int omap3evm_panel_enable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
+ return 0;
+}
+
+static void omap3evm_panel_disable(struct lcd_panel *panel)
+{
+ gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
+}
+
+static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel)
+{
+ return 0;
+}
+
+static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
+ unsigned int level)
+{
+ u8 c;
+ if ((level >= 0) && (level <= 100)) {
+ c = (125 * (100 - level)) / 100 + 2;
+ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
+ bklight_level = level;
+ }
+ return 0;
+}
+
+static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel)
+{
+ return bklight_level;
+}
+
+static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel)
+{
+ return 100;
+}
+
+struct lcd_panel omap3evm_panel = {
+ .name = "omap3evm",
+ .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+ OMAP_LCDC_INV_HSYNC,
+
+ .bpp = 16,
+ .data_lines = 18,
+ .x_res = 480,
+ .y_res = 640,
+ .hsw = 3, /* hsync_len (4) - 1 */
+ .hfp = 3, /* right_margin (4) - 1 */
+ .hbp = 39, /* left_margin (40) - 1 */
+ .vsw = 1, /* vsync_len (2) - 1 */
+ .vfp = 2, /* lower_margin */
+ .vbp = 7, /* upper_margin (8) - 1 */
+
+ .pixel_clock = 26000,
+
+ .init = omap3evm_panel_init,
+ .cleanup = omap3evm_panel_cleanup,
+ .enable = omap3evm_panel_enable,
+ .disable = omap3evm_panel_disable,
+ .get_caps = omap3evm_panel_get_caps,
+ .set_bklight_level = omap3evm_bklight_setlevel,
+ .get_bklight_level = omap3evm_bklight_getlevel,
+ .get_bklight_max = omap3evm_bklight_getmaxlevel,
+};
+
+static int omap3evm_panel_probe(struct platform_device *pdev)
+{
+ omapfb_register_panel(&omap3evm_panel);
+ return 0;
+}
+
+static int omap3evm_panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static int omap3evm_panel_suspend(struct platform_device *pdev,
+ pm_message_t mesg)
+{
+ return 0;
+}
+
+static int omap3evm_panel_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+
+struct platform_driver omap3evm_panel_driver = {
+ .probe = omap3evm_panel_probe,
+ .remove = omap3evm_panel_remove,
+ .suspend = omap3evm_panel_suspend,
+ .resume = omap3evm_panel_resume,
+ .driver = {
+ .name = "omap3evm_lcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init omap3evm_panel_drv_init(void)
+{
+ return platform_driver_register(&omap3evm_panel_driver);
+}
+
+static void __exit omap3evm_panel_drv_exit(void)
+{
+ platform_driver_unregister(&omap3evm_panel_driver);
+}
+
+module_init(omap3evm_panel_drv_init);
+module_exit(omap3evm_panel_drv_exit);
--
1.6.3.2
next prev parent reply other threads:[~2009-06-24 11:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-24 11:33 [PATCH 00/20] omapfb: Add support for new LCDs / misc fixes Imre Deak
2009-06-24 11:33 ` [PATCH 01/20] omapfb: Add support for the Apollon LCD Imre Deak
2009-06-24 11:33 ` [PATCH 02/20] omapfb: Add support for MIPI-DCS compatible LCDs Imre Deak
2009-06-24 11:33 ` [PATCH 03/20] omapfb: Add support for the Amstrad Delta LCD Imre Deak
2009-06-24 11:33 ` [PATCH 04/20] omapfb: Add support for the 2430SDP LCD Imre Deak
2009-06-24 11:33 ` [PATCH 05/20] omapfb: Add support for the OMAP2EVM LCD Imre Deak
2009-06-24 11:33 ` [PATCH 06/20] omapfb: Add support for the 3430SDP LCD Imre Deak
2009-06-24 11:33 ` Imre Deak [this message]
2009-06-24 11:33 ` [PATCH 08/20] omapfb: Add support for the OMAP3 Beagle DVI output Imre Deak
2009-06-24 11:33 ` [PATCH 09/20] omapfb: Add support for the Gumstix Overo LCD Imre Deak
2009-06-24 11:33 ` [PATCH 10/20] omapfb: Add support for the ZOOM MDK LCD Imre Deak
2009-06-24 11:33 ` [PATCH 11/20] omapfb: Add support for rotation on the Blizzard LCD ctrl Imre Deak
2009-06-24 11:33 ` [PATCH 12/20] N770: Enable LCD MIPI-DCS in Kconfig Imre Deak
2009-06-24 11:33 ` [PATCH 13/20] omapfb: dispc: Various typo fixes Imre Deak
2009-06-24 11:33 ` [PATCH 14/20] omapfb: dispc: Disable iface clocks along with func clocks Imre Deak
2009-06-24 11:33 ` [PATCH 15/20] omapfb: dispc: Enable wake up capability Imre Deak
2009-06-24 11:33 ` [PATCH 16/20] omapfb: dispc: Allow multiple external IRQ handlers Imre Deak
2009-06-24 11:33 ` [PATCH 17/20] omapfb: suspend/resume only if FB device is already initialized Imre Deak
2009-06-24 11:33 ` [PATCH 18/20] omapfb: Fix coding style / remove dead line Imre Deak
2009-06-24 11:33 ` [PATCH 19/20] omapfb: Add FB manual update option to Kconfig Imre Deak
2009-06-24 11:33 ` [PATCH 20/20] omapfb: HWA742: fix pointer to be const Imre Deak
2009-06-24 12:16 ` [PATCH 16/20] omapfb: dispc: Allow multiple external IRQ handlers Felipe Balbi
2009-06-24 13:35 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=af3d1e0dff22f0bb72f6ccee57dfa9a1e5f31abb.1245842329.git.imre.deak@nokia.com \
--to=imre.deak@nokia.com \
--cc=Tomi.Valkeinen@nokia.com \
--cc=adaplas@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=krzysztof.h1@poczta.fm \
--cc=linux-kernel@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®