Re: [PATCH v7 5/7] clk: baikal-t1: Move reset-controls code into a dedicated module

[Randy Dunlap <rdunlap@infradead.org>]

On 7/11/22 08:44, Serge Semin wrote:
> diff --git a/drivers/clk/baikal-t1/Kconfig b/drivers/clk/baikal-t1/Kconfig
> index 03102f1094bc..56a4ff1d8bf0 100644
> --- a/drivers/clk/baikal-t1/Kconfig
> +++ b/drivers/clk/baikal-t1/Kconfig
> @@ -29,7 +29,6 @@ config CLK_BT1_CCU_PLL
>  
>  config CLK_BT1_CCU_DIV
>  	bool "Baikal-T1 CCU Dividers support"
> -	select RESET_CONTROLLER
>  	select MFD_SYSCON
>  	default MIPS_BAIKAL_T1
>  	help
> @@ -39,4 +38,15 @@ config CLK_BT1_CCU_DIV
>  	  either gateable or ungateable. Some of the CCU dividers can be as well
>  	  used to reset the domains they're supplying clock to.
>  
> +config CLK_BT1_CCU_RST
> +	bool "Baikal-T1 CCU Resets support"
> +	select RESET_CONTROLLER
> +	select MFD_SYSCON
> +	default MIPS_BAIKAL_T1
> +	help
> +	  Enable this to support the CCU reset blocks responsible for the
> +	  AXI-bus and some subsystems reset. These are mainly the
> +	  sef-deasserted reset controls but there are several lines which

	  self-deasserted
?

> +	  can be directly asserted/de-asserted (PCIe and DDR sub-domains).

-- 
~Randy