Re: [PATCH v3 4/4] phy: qualcomm: qmp-combo: Rework DP PHY runtime configuration

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 8/28/26 11:43 AM, Nabige Aala wrote:
> From: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> 
> Rework the DP PHY runtime configuration by:
> - Extracting common DP PHY initialization sequence into
>   qmp_combo_configure_dp_phy_common() function that is shared
>   between qmp_v456_configure_dp_phy() and qmp_v8_configure_dp_phy()
> - Adding dp_aux_cfg2 field to qmp_phy_cfg structure to store the
>   hardware-specific AUX_CFG2 register value
> - Defining named constants (QSERDES_DP_PHY_AUX_CFG2_V456 and
>   QSERDES_DP_PHY_AUX_CFG2_V8) for better code readability
>   and maintainability
> - Adding validation check to ensure dp_aux_cfg2 is properly
>   configured for all hardware variants
> - Updating qmp_v8_dp_aux_init() with corrected power-down control and
>   bias enable settings
> - Modifying qmp_v8_configure_dp_clocks() to add VCO divider programming
>   and update auxless/LFPS timing parameters
> - Refining qmp_v8_configure_dp_phy() with updated driver enable values,
>   TSYNC override sequence, and additional status checks for proper
>   PHY lock verification
> 
> Signed-off-by: Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>
> Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---

qmp_combo_configure_dp_mode() needs to be updated to ignore reverse state
on Glymur

cfg->configure_dp_phy()'s return value is currently ignored, let's fix
that too

Konrad