On Wed, Jul 15, 2026 at 10:16:36AM +0000, Prathamesh Shete wrote: > The dap2_din_pv7 and dap2_dout_pw0 pin groups were assigned swapped > primary mux functions: dap2_din_pv7 (data input) was muxed to > I2S2_SDATA_OUT and dap2_dout_pw0 (data output) to I2S2_SDATA_IN. As a > result the I2S2 data-in and data-out signals were routed to the wrong > pins, breaking DAP2 audio. > > Correct the functions so dap2_din_pv7 uses I2S2_SDATA_IN and dap2_dout_pw0 > uses I2S2_SDATA_OUT. The register offsets and drive-group macros are > already correct and are left unchanged. > > Fixes: c98506206912 ("pinctrl: tegra: Add Tegra264 pinmux driver") > Signed-off-by: Prathamesh Shete > --- > drivers/pinctrl/tegra/pinctrl-tegra264.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) Acked-by: Thierry Reding