Linux version 7.1.3 (wbx@macbook) (mipsel-freewrt-linux-uclibc-gcc (GCC) 16.1.0, GNU ld (GNU Binutils) 2.46.1) #1 Wed Jul 15 11:24:45 CEST 2026 printk: legacy bootconsole [early0] enabled CPU0 revision is: 00029007 (Broadcom BMIPS3300) bcm47xx: Using ssb bus ssb: Found chip with id 0x4712, rev 0x01 and package 0x00 can not parse nvram name (null)ag0(null) with value 255 got -34 ssb: Sonics Silicon Backplane found at address 0x18000000 Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes. Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes Zone ranges: Normal [mem 0x0000000000000000-0x0000000001ffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000001ffffff] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Kernel command line: root=/dev/mtdblock4 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200 Unknown kernel command line parameters "noinitrd", will be passed to user space. printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes Dentry cache hash table entries: 4096 (order: 2, 16384 bytes, linear) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Built 1 zonelists, mobility grouping on. Total pages: 8192 mem auto-init: stack:all(zero), heap alloc:off, heap free:off SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS: 256 MIPS: machine is Linksys WRT54G/GS/GL clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns Console: colour dummy device 80x25 Calibrating delay loop... 198.65 BogoMIPS (lpj=397312) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) VFS: Finished mounting rootfs on nullfs Memory: 25676K/32768K available (4009K kernel code, 556K rwdata, 956K rodata, 228K init, 268K bss, 6348K reserved, 0K cma-reserved) devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns posixtimers hash table entries: 512 (order: 0, 2048 bytes, linear) futex hash table entries: 256 (4096 bytes on 1 NUMA nodes, total 4 KiB, linear). NET: Registered PF_NETLINK/PF_ROUTE protocol family clocksource: Switched to clocksource MIPS PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: PCI: Fixing up bridge 0000:00:00.0 pci 0000:00:00.0: PCI: Fixing up device 0000:00:00.0 pci 0000:00:00.0: PCI: Fixing latency timer of device 0000:00:00.0 to 168 pci 0000:00:00.0: ssb_pcicore_fixup_pcibridge+0x0/0xf8 took 17901 usecs pci 0000:00:00.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:01.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:01.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:02.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:03.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:03.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:04.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:04.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:05.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:05.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:06.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:06.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:07.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:07.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:08.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:08.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:09.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:09.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0a.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0a.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0b.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0b.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0c.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0c.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0d.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0d.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0d.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0e.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0e.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0e.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci 0000:00:0f.0: [14e4:4712] type 00 class 0x060000 conventional PCI endpoint pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00001fff] pci 0000:00:0f.0: BAR 1 [mem 0x00000000-0x07ffffff pref] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 ssb: XXX: ssb_gpio_init called, bustype=0 ssb: XXX: software_node_register(&ssb_gpio_swnode) returned 0 ssb: XXX: chipcommon chip->fwnode set to (ptrval) gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. NET: Registered PF_INET protocol family IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 1, 8192 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family PCI: CLS 0 bytes, default 16 bcm47xx: XXX: bcm47xx_buttons_add called, bus_type=0, gpio_swnode=(ptrval) (&ssb_gpio_swnode=(ptrval)) Initialise system trusted keyrings workingset: timestamp_bits=30 (anon: 26) max_order=13 bucket_order=0 (anon: 0) squashfs: version 4.0 (2009/01/31) Phillip Lougher Key type asymmetric registered Asymmetric key parser 'x509' registered io scheduler mq-deadline registered Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled printk: legacy console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3, base_baud = 3125000) is a 16550A printk: legacy console [ttyS0] enabled printk: legacy bootconsole [early0] disabled serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3, base_baud = 3125000) is a 16550A physmap-flash physmap-flash.0: physmap platform flash device: [mem 0x1c000000-0x1e000000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000017 physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0 Intel/Sharp Extended Query Table at 0x0031 Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled erase region 0: offset=0x0,size=0x20000,blocks=64 4 bcm47xxpart partitions found on MTD device physmap-flash.0 Creating 4 MTD partitions on "physmap-flash.0": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x0000007c0000 : "firmware" failed to parse "brcm,trx-magic" DT attribute, using default: -89 3 trx partitions found on MTD device firmware Creating 3 MTD partitions on "firmware": 0x00000000001c-0x000000000938 : "loader" mtd: partition "loader" doesn't start on an erase/write block boundary -- force read-only 0x000000000938-0x0000001c0800 : "linux" mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only 0x0000001c0800-0x000000780000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only 0x0000007c0000-0x0000007e0000 : "fwcf" 0x0000007e0000-0x000000800000 : "nvram" b44 ssb0:1: could not find PHY at 30, use fixed one Generic PHY fixed-0:00: attached PHY driver (mii_bus:phy_addr=fixed-0:00, irq=POLL) b44 ssb0:1 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:0f:66:c8:74:47 NET: Registered PF_PACKET protocol family 8021q: 802.1Q VLAN Support v1.8 Loading compiled-in X.509 certificates XXX: software_node_get_reference_args: refnode is NULL for swnode=(ptrval) (gpio-keys), fwnode=(ptrval) VFS: Mounted root (squashfs filesystem) readonly on device 31:4. devtmpfs: mounted VFS: Pivoted into new rootfs Freeing unused kernel image (initmem) memory: 228K This architecture does not have kernel memory protection. Run /etc/preinit as init process with arguments: /etc/preinit noinitrd with environment: HOME=/ TERM=linux random: crng init done b44 ssb0:1 eth0: Link is up at 100 Mbps, half duplex b44 ssb0:1 eth0: Flow control is off for TX and off for RX b44 ssb0:1 eth0: Link is Up - 100Mbps/Full - flow control off XXX: software_node_get_reference_args: refnode is NULL for swnode=8d67cb1c ((efault)), fwnode=b3963255 platform gpio-keys.0: deferred probe pending: gpio-keys: failed to get gpio