From: Justin Piszcz <jpiszcz@lucidpixels.com>
To: "Mr. James W. Laferriere" <babydr@baby-dragons.com>
Cc: Tom Mortensen <tmmlkml@gmail.com>, Tejun Heo <tj@kernel.org>,
Bill Davidsen <davidsen@tmr.com>,
Gwendal Grignou <gwendal@google.com>,
Brian Rademacher <rad@radfiles.net>,
linux-ide@vger.kernel.org,
linux-raid maillist <linux-raid@vger.kernel.org>,
Linux Kernel Maillist <linux-kernel@vger.kernel.org>,
Bruce Allen <ballen@gravity.phys.uwm.edu>
Subject: Re: exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen
Date: Wed, 1 Oct 2008 07:12:57 -0400 (EDT) [thread overview]
Message-ID: <alpine.DEB.1.10.0810010710520.22435@p34.internal.lan> (raw)
In-Reply-To: <alpine.DEB.1.10.0810010403500.16900@p34.internal.lan>
On Wed, 1 Oct 2008, Justin Piszcz wrote:
>
>
> On Tue, 30 Sep 2008, Mr. James W. Laferriere wrote:
>
>> Hello Justin ,
>>
>>>
>>> Justin.
>> I take it you've tried differant drive manufacturers ?
> It happens across 12-14 velociraptors.
>
>> Or even a differant drive of same manuf. ?
> It also occurs (I have seen it) on WD 750GiB drives on a different
> motherboard
> and chipset (P35).
>
>> Seeing as you've moved this same drive(?) across several chipsets &
>> possibly mother boards , Leads me to beleive that the difficulty is either
>> with the driver or the drive (if it is always the same drive or drive
>> model)
> Other people have the same problem with Seagate and / other drives.
> This also occurs on Raptor 150s.
>
> Justin.
>
>
>
This morning (On P965 board this time-- and on RAID1, not RAID5)
[469680.004654] ata2.00: status: { DRDY }
[469680.004660] ata2: hard resetting link
[469680.309567] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[469680.333461] ata2.00: configured for UDMA/133
[469680.333477] ata2: EH complete
[469680.333461] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[469680.340461] sd 1:0:0:0: [sdb] Write Protect is off
[469680.340461] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[469680.345461] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3000GLFS-01F8U0
Serial Number: XX-XXXXXXXXXXXX
Firmware Version: 03.03V01
User Capacity: 300,069,052,416 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Oct 1 07:11:23 2008 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Perfectly good disk (and yes, I have swapped out cables as well), even tried
different a differnet server/psu (earlier version of the same motherboard)
as well):
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 204 196 021 Pre-fail Always - 2758
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 36
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2790
10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 36
194 Temperature_Celsius 0x0022 120 114 000 Old_age Always - 27
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 2784 -
# 2 Short offline Completed without error 00% 2760 -
# 3 Short offline Completed without error 00% 2736 -
# 4 Extended offline Completed without error 00% 2713 -
# 5 Short offline Completed without error 00% 2688 -
# 6 Extended offline Completed without error 00% 2513 -
# 7 Short offline Completed without error 00% 2305 -
# 8 Short offline Completed without error 00% 2281 -
# 9 Short offline Completed without error 00% 2258 -
#10 Short offline Completed without error 00% 2234 -
#11 Extended offline Completed without error 00% 2210 -
#12 Short offline Completed without error 00% 2186 -
#13 Short offline Completed without error 00% 2138 -
#14 Short offline Completed without error 00% 2114 -
#15 Short offline Completed without error 00% 2090 -
#16 Short offline Completed without error 00% 2066 -
#17 Extended offline Completed without error 00% 2043 -
#18 Short offline Completed without error 00% 2018 -
#19 Short offline Completed without error 00% 1970 -
#20 Short offline Completed without error 00% 1946 -
#21 Short offline Completed without error 00% 1922 -
next prev parent reply other threads:[~2008-10-01 11:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <3E6D0C24877245C3A5A327129A7B4CA7@909927SOSLA>
[not found] ` <alpine.DEB.1.10.0809220404400.18908@p34.internal.lan>
[not found] ` <5A4A9A3B0AAA4A20A33BC2D578F5F75F@909927SOSLA>
[not found] ` <alpine.DEB.1.10.0809220828490.23159@p34.internal.lan>
[not found] ` <5419A02543384E69AF2BA82FF6E66C14@909927SOSLA>
[not found] ` <alpine.DEB.1.10.0809220903400.23159@p34.internal.lan>
[not found] ` <4B1ABD0393EF40FFB0A12242FE8356AF@909927SOSLA>
2008-09-22 13:19 ` Justin Piszcz
2008-09-22 13:26 ` Justin Piszcz
2008-09-23 18:14 ` Gwendal Grignou
2008-09-23 20:59 ` Brian Rademacher
2008-09-25 15:17 ` Bill Davidsen
2008-09-29 8:13 ` Tejun Heo
2008-09-30 20:47 ` Tom Mortensen
2008-09-30 21:18 ` Justin Piszcz
2008-10-01 3:50 ` Mr. James W. Laferriere
2008-10-01 8:06 ` Justin Piszcz
2008-10-01 11:12 ` Justin Piszcz [this message]
2008-10-04 2:27 ` Tejun Heo
2008-10-04 8:11 ` Justin Piszcz
2008-10-05 0:23 ` Justin Piszcz
2008-10-05 0:29 ` berk walker
2008-10-10 19:13 ` Justin Piszcz
2008-10-10 19:27 ` Alan Cox
2008-10-01 15:09 ` Bill Davidsen
2008-09-30 22:04 Christian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.1.10.0810010710520.22435@p34.internal.lan \
--to=jpiszcz@lucidpixels.com \
--cc=babydr@baby-dragons.com \
--cc=ballen@gravity.phys.uwm.edu \
--cc=davidsen@tmr.com \
--cc=gwendal@google.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=rad@radfiles.net \
--cc=tj@kernel.org \
--cc=tmmlkml@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®