From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1763492AbYJJTNk (ORCPT ); Fri, 10 Oct 2008 15:13:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1761723AbYJJTN3 (ORCPT ); Fri, 10 Oct 2008 15:13:29 -0400 Received: from lucidpixels.com ([75.144.35.66]:34980 "EHLO lucidpixels.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759625AbYJJTN2 (ORCPT ); Fri, 10 Oct 2008 15:13:28 -0400 Date: Fri, 10 Oct 2008 15:13:26 -0400 (EDT) From: Justin Piszcz To: Tejun Heo cc: "Mr. James W. Laferriere" , Tom Mortensen , Bill Davidsen , Gwendal Grignou , Brian Rademacher , linux-ide@vger.kernel.org, linux-raid maillist , Linux Kernel Maillist , Bruce Allen , smartmontools-support@lists.sourceforge.net, xfs@oss.sgi.com Subject: Re: exception Emask 0x0 SAct 0x1 / SErr 0x0 action 0x2 frozen In-Reply-To: Message-ID: References: <3E6D0C24877245C3A5A327129A7B4CA7@909927SOSLA> <5419A02543384E69AF2BA82FF6E66C14@909927SOSLA> <4B1ABD0393EF40FFB0A12242FE8356AF@909927SOSLA> <48DBAB81.8050900@tmr.com> <48E08E2D.6050905@kernel.org> <48E6D481.7050407@kernel.org> User-Agent: Alpine 1.10 (DEB 962 2008-03-14) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; format=flowed; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sat, 4 Oct 2008, Justin Piszcz wrote: > > > On Sat, 4 Oct 2008, Tejun Heo wrote: > >> Justin Piszcz wrote: >> What do these signifiers mean (they are always the same, no matter the controller used OR the disk in question (happens across 12 disks and 3 different controllers)): [420781.333179] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [420781.333189] ata6.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 ^^ ^^(b0/d8)^^ ^^(4f:c2) [420781.333190] res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ^^ 40:00:ff [420781.333194] ata6.00: status: { DRDY } [420781.333200] ata6: hard resetting link [420781.638589] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [420781.662166] ata6.00: configured for UDMA/133 [420781.662166] ata6: EH complete (at the time there was little to no I/O occuring on this block device, but disks on the raid5 volume were being accessed at the time, so there was system activity, mainly disk reads 300-500KiB/s over ethernet) Nick's(?) problem: > Nick > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 ^^ ^^ (ea/00) vs. (b0/d8) - mind are always the same (FYI) > res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) ^^ ^^ (40:00: but no ff) The rest of the messages are the same. Is there any correlation that can be made here? When this happens to others, is it always the same codes as shown above or do they change? If they do not change, how come they vary between users who have this problem? > ata1.00: status: { DRDY } > ata1: soft resetting link > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: configured for UDMA/133 > ata1: EH complete > sd 1:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB) > sd 1:0:0:0: [sda] Write Protect is off > sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA Can anything be said about these errors, can we classify them into groups? Or are they just random? It does not appear to happen more or less with one filesystem or another either, one guy is using ext3, I am using XFS-- certainly something much deeper.. Justin.