mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Justin Piszcz <jpiszcz@lucidpixels.com>
To: alsa-devel@vger.kernel.org, linux-kernel@vger.kernel.org,
	alsa-user@lists.sourceforge.net
Subject: Re: 2.6.28: hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Date: Tue, 30 Dec 2008 07:28:14 -0500 (EST)	[thread overview]
Message-ID: <alpine.DEB.1.10.0812300727380.11356@p34.internal.lan> (raw)
In-Reply-To: <alpine.DEB.1.10.0812300616570.11356@p34.internal.lan>

[-- Attachment #1: Type: TEXT/PLAIN, Size: 3882 bytes --]



On Tue, 30 Dec 2008, Justin Piszcz wrote:

> The audio for this board works fine, there are no issues, but there are some 
> cosmetic issues when the driver loads:
>
> 1. Unknown model.
> 2. Wrong model number.
>
> On my ABIT AW9D-MAX motherboard:
> [   10.667963] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
> [   10.668156] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> 
> IRQ 1
> 6
> [   10.668228] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [   10.677932] hda_codec: Unknown model for ALC883, trying auto-probe from 
> BIOS.
> ..
> [   10.705082] ALSA device list:
> [   10.705128]   #0: HDA Intel at 0xfdff8000 irq 16
>
> On an Intel motherboard, correctly detected, no warnings about an Unknown
> model.
>
> [    5.466951] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
> [    5.470149] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> 
> IRQ 22
> [    5.473135] HDA Intel 0000:00:1b.0: setting latency timer to 64
> [    5.512645] ALSA device list:
> [    5.515568]   #0: HDA Intel at 0xe2420000 irq 22
>
> Specs:
> # abit AudioMAX# HD 7.1 CH
> # Supports Jack Sensing and S/PDIF In/Out
> # Dolby® Master Studio Certificated 
> http://www.abit.com.tw/page/en/motherboard/motherboard_detail.php?pMODEL_NAME=AW9D-MAX&fMTYPE=LGA775&pPRODINFO=Specifications&fSEARCHTEXT=AW9D-MAX
>
> Not too specific, however:
> http://www.anandtech.com/mb/showdoc.aspx?i=2829
>
> Reveals the correct model:
> -> Realtek ALC882M HD-Audio 8-channel CODEC - Dolby Master Studio Where the 
> kernel believes it is an ALC883.
>
> Would it be possible to probe properly/and get the correct model number in 
> there for this audio chipset?
>
> lspci:
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
> Audio Controller (rev 01)
>
> lspci -vvvx:
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
> Audio Controller (rev 01)
>  Subsystem: ABIT Computer Corp. Device 107a
>  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx-
>  Latency: 0, Cache Line Size: 4 bytes
>  Interrupt: pin A routed to IRQ 16
>  Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K]
>  Capabilities: [50] Power Management version 2
>    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>  Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
> Enable-
>    Address: 0000000000000000  Data: 0000
>  Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>      ExtTag- RBE- FLReset-
>    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>      RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>      MaxPayload 128 bytes, MaxReadReq 128 bytes
>    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, 
> L1 <1us
>      ClockPM- Suprise- LLActRep- BwNot-
>    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
>      ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- 
> ABWMgmt-
>  Capabilities: [100] Virtual Channel <?>
>  Capabilities: [130] Root Complex Link <?>
>  Kernel driver in use: HDA Intel
> 00: 86 80 d8 27 06 00 10 00 01 00 03 04 01 00 00 00
> 10: 04 80 ff fd 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 7a 10
> 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 00

Fixed alsa e-mail in cc list.

Justin.

  reply	other threads:[~2008-12-30 12:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-30 12:25 Justin Piszcz
2008-12-30 12:28 ` Justin Piszcz [this message]
2008-12-31 21:29   ` Justin Piszcz
2009-01-01  9:25   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.1.10.0812300727380.11356@p34.internal.lan \
    --to=jpiszcz@lucidpixels.com \
    --cc=alsa-devel@vger.kernel.org \
    --cc=alsa-user@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®