From: Justin Piszcz <jpiszcz@lucidpixels.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, xfs@oss.sgi.com
Subject: Re: Switching from (deprecated) IDE driver -> SATA (PATA support)
Date: Sun, 25 Jan 2009 07:09:15 -0500 (EST) [thread overview]
Message-ID: <alpine.DEB.1.10.0901250705300.6888@p34.internal.lan> (raw)
In-Reply-To: <20090125110742.4ba54c0b@lxorguk.ukuu.org.uk>
On Sun, 25 Jan 2009, Alan Cox wrote:
> Easiest is to use labels. Old ide will keep hda,b,c,d constant
> providing you have interfaces using the legacy IDE port mappings (0x1f0
> and 0x170). Libata doesn't do that as pretty much every distribution had
> already switched to volume labels, and the user space can do the job far
> better than the kernel - especially as the newer devices with modern
> interfaces don't have the old BIOS/DOS legacy ideas any more.
>
> Mount by label also means you can flip back and forth between the
> different drivers and kernel revisions.
>
> Alan
>
That works well with ext* filesystems as one can set it anytime with
e2label if I recall; however, how can one do this with XFS, is it
possible without booting off a boot-cd etc?
Here is the filesystem information:
p254:~# xfs_info /dev/sdd2
meta-data=/dev/root isize=256 agcount=16, agsize=1186676 blks
= sectsz=512 attr=0
data = bsize=4096 blocks=18986816, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096
log =internal bsize=4096 blocks=9270, version=1
= sectsz=512 sunit=0 blks, lazy-count=0
realtime =none extsz=65536 blocks=0, rtextents=0
When I try to label it:
p254:~# xfs_admin -L "root" /dev/sdd2
xfs_admin: /dev/sdd2 contains a mounted filesystem
fatal error -- couldn't initialize XFS library
The label is currently not set:
p254:~# xfs_admin -l /dev/sdd2
label = ""
p254:~#
I guess my next step is to try UUID?
Instead of giving the device explicitly, one may indicate the (ext2 or
xfs) filesystem that is to be mounted by its UUID or volume label (cf.
e2label(8) or xfs_admin(8)), writing LABEL=<label> or UUID=<uuid>,
e.g., `LABEL=Boot' or `UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'.
This will make the system more robust: adding or removing a SCSI disk
changes the disk device name but not the filesystem volume label.
p254:~# xfs_admin -U generate /dev/sdd2
xfs_admin: /dev/sdd2 contains a mounted filesystem
fatal error -- couldn't initialize XFS library
p254:~#
Hmm, am I out of luck?
Justin.
next prev parent reply other threads:[~2009-01-25 12:09 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-25 10:56 Justin Piszcz
2009-01-25 11:07 ` Alan Cox
2009-01-25 12:09 ` Justin Piszcz [this message]
2009-01-25 12:15 ` Justin Piszcz
2009-01-25 12:28 ` Justin Piszcz
2009-01-25 12:41 ` Justin Piszcz
2009-01-25 12:55 ` Switching from (deprecated) IDE driver -> SATA (PATA support) (found solution) Justin Piszcz
2009-01-25 13:08 ` Switching from (deprecated) IDE driver -> SATA (PATA support) (found solution (scratch that)) Justin Piszcz
2009-01-25 13:15 ` Michael Tokarev
2009-01-25 15:45 ` Switching from (deprecated) IDE driver -> SATA (PATA support) Eric Sandeen
[not found] ` <alpine.DEB.1.10.0901250726530.10805__44823.8515914001$1232890466$gmane$org@p34.internal.lan>
2009-01-25 21:13 ` Bill Davidsen
2009-01-25 21:14 ` Justin Piszcz
2009-01-29 23:44 ` Bill Davidsen
2009-01-26 22:02 ` Lennart Sorensen
2009-01-26 23:36 ` Sergei Shtylyov
2009-01-25 18:04 ` Mark Lord
2009-01-25 19:27 ` Bartlomiej Zolnierkiewicz
2009-01-25 21:13 ` Justin Piszcz
2009-01-25 21:39 ` Bartlomiej Zolnierkiewicz
2009-01-29 23:50 ` Bill Davidsen
2009-01-30 3:38 ` david
2009-01-30 10:21 ` Alan Cox
2009-01-30 10:11 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.1.10.0901250705300.6888@p34.internal.lan \
--to=jpiszcz@lucidpixels.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®