2.6.31+2.6.31.4: XFS - All I/O locks up to D-state after 24-48 hours (sysrq-t+w available)

[Justin Piszcz <jpiszcz@lucidpixels.com>]

Hello,

I have a system I recently upgraded from 2.6.30.x and after approximately 
24-48 hours--sometimes longer, the system cannot write any more files to 
disk (luckily though I can still write to /dev/shm) -- to which I have
saved the sysrq-t and sysrq-w output:

http://home.comcast.net/~jpiszcz/20091017/sysrq-w.txt
http://home.comcast.net/~jpiszcz/20091017/sysrq-t.txt

Configuration:

$ cat /proc/mdstat 
Personalities : [raid1] [raid6] [raid5] [raid4] 
md1 : active raid1 sdb2[1] sda2[0]
       136448 blocks [2/2] [UU]

md2 : active raid1 sdb3[1] sda3[0]
       129596288 blocks [2/2] [UU]

md3 : active raid5 sdj1[7] sdi1[6] sdh1[5] sdf1[3] sdg1[4] sde1[2] sdd1[1] sdc1[0]
       5128001536 blocks level 5, 1024k chunk, algorithm 2 [8/8] [UUUUUUUU]

md0 : active raid1 sdb1[1] sda1[0]
       16787776 blocks [2/2] [UU]

$ mount
/dev/md2 on / type xfs (rw,noatime,nobarrier,logbufs=8,logbsize=262144)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/md1 on /boot type ext3 (rw,noatime)
/dev/md3 on /r/1 type xfs (rw,noatime,nobarrier,logbufs=8,logbsize=262144)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
nfsd on /proc/fs/nfsd type nfsd (rw)

Distribution: Debian Testing
Arch: x86_64

The problem occurs with 2.6.31 and I upgraded to 2.6.31.4 and the problem
persists.

Here is a snippet of two processes in D-state, the first was not doing 
anything, the second was mrtg.

[121444.684000] pickup        D 0000000000000003     0 18407   4521 0x00000000
[121444.684000]  ffff880231dd2290 0000000000000086 0000000000000000 0000000000000000
[121444.684000]  000000000000ff40 000000000000c8c8 ffff880176794d10 ffff880176794f90
[121444.684000]  000000032266dd08 ffff8801407a87f0 ffff8800280878d8 ffff880176794f90
[121444.684000] Call Trace:
[121444.684000]  [<ffffffff810a742d>] ? free_pages_and_swap_cache+0x9d/0xc0
[121444.684000]  [<ffffffff81454866>] ? __mutex_lock_slowpath+0xd6/0x160
[121444.684000]  [<ffffffff814546ba>] ? mutex_lock+0x1a/0x40
[121444.684000]  [<ffffffff810b26ef>] ? generic_file_llseek+0x2f/0x70
[121444.684000]  [<ffffffff810b119e>] ? sys_lseek+0x7e/0x90
[121444.684000]  [<ffffffff8109ffd2>] ? sys_munmap+0x52/0x80
[121444.684000]  [<ffffffff8102c52b>] ? system_call_fastpath+0x16/0x1b

[121444.684000] rateup        D 0000000000000000     0 18538  18465 0x00000000
[121444.684000]  ffff88023f8a8c10 0000000000000082 0000000000000000 ffff88023ea09ec8
[121444.684000]  000000000000ff40 000000000000c8c8 ffff88023faace50 ffff88023faad0d0
[121444.684000]  0000000300003e00 000000010720cc78 0000000000003e00 ffff88023faad0d0
[121444.684000] Call Trace:
[121444.684000]  [<ffffffff811f42e2>] ? xfs_buf_iorequest+0x42/0x90
[121444.684000]  [<ffffffff811dd66d>] ? xlog_bdstrat_cb+0x3d/0x50
[121444.684000]  [<ffffffff811db05b>] ? xlog_sync+0x20b/0x4e0
[121444.684000]  [<ffffffff811dc44c>] ? xlog_state_sync+0x26c/0x2a0
[121444.684000]  [<ffffffff810513e0>] ? default_wake_function+0x0/0x10
[121444.684000]  [<ffffffff811dc4d1>] ? _xfs_log_force+0x51/0x80
[121444.684000]  [<ffffffff811dc50b>] ? xfs_log_force+0xb/0x40
[121444.684000]  [<ffffffff811a7223>] ? xfs_alloc_ag_vextent+0x123/0x130
[121444.684000]  [<ffffffff811a7aa8>] ? xfs_alloc_vextent+0x368/0x4b0
[121444.684000]  [<ffffffff811b41e8>] ? xfs_bmap_btalloc+0x598/0xa40
[121444.684000]  [<ffffffff811b6a42>] ? xfs_bmapi+0x9e2/0x11a0
[121444.684000]  [<ffffffff811dd7f0>] ? xlog_grant_push_ail+0x30/0xf0
[121444.684000]  [<ffffffff811e8fd8>] ? xfs_trans_reserve+0xa8/0x220
[121444.684000]  [<ffffffff811d805e>] ? xfs_iomap_write_allocate+0x23e/0x3b0
[121444.684000]  [<ffffffff811f0daf>] ? __xfs_get_blocks+0x8f/0x220
[121444.684000]  [<ffffffff811d8c00>] ? xfs_iomap+0x2c0/0x300
[121444.684000]  [<ffffffff810d5b76>] ? __set_page_dirty+0x66/0xd0
[121444.684000]  [<ffffffff811f0d15>] ? xfs_map_blocks+0x25/0x30
[121444.684000]  [<ffffffff811f1e04>] ? xfs_page_state_convert+0x414/0x6c0
[121444.684000]  [<ffffffff811f23b7>] ? xfs_vm_writepage+0x77/0x130
[121444.684000]  [<ffffffff8108b21a>] ? __writepage+0xa/0x40
[121444.684000]  [<ffffffff8108baff>] ? write_cache_pages+0x1df/0x3c0
[121444.684000]  [<ffffffff8108b210>] ? __writepage+0x0/0x40
[121444.684000]  [<ffffffff810b1533>] ? do_sync_write+0xe3/0x130
[121444.684000]  [<ffffffff8108bd30>] ? do_writepages+0x20/0x40
[121444.684000]  [<ffffffff81085abd>] ? __filemap_fdatawrite_range+0x4d/0x60
[121444.684000]  [<ffffffff811f54dd>] ? xfs_flush_pages+0xad/0xc0
[121444.684000]  [<ffffffff811ee907>] ? xfs_release+0x167/0x1d0
[121444.684000]  [<ffffffff811f52b0>] ? xfs_file_release+0x10/0x20
[121444.684000]  [<ffffffff810b2c0d>] ? __fput+0xcd/0x1e0
[121444.684000]  [<ffffffff810af556>] ? filp_close+0x56/0x90
[121444.684000]  [<ffffffff810af636>] ? sys_close+0xa6/0x100
[121444.684000]  [<ffffffff8102c52b>] ? system_call_fastpath+0x16/0x1b

Anyone know what is going on here?

Justin.