From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: <linux-kernel@vger.kernel.org>
Cc: <xen-devel@lists.xensource.com>,
Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>,
Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Subject: [PATCH 00/12] xen: initial domain support
Date: Tue, 28 Sep 2010 13:16:37 +0100 [thread overview]
Message-ID: <alpine.DEB.2.00.1009281217540.2864@kaball-desktop> (raw)
Hi all,
this series implements the basic support needed to boot Linux as initial
domain on Xen: the target is not to add full featured dom0 support in
the kernel but to be able to boot Linux on Xen on native.
We tried to minimize the impact to generic x86 code and interfaces and
as you can see from the diffstat below we were able to reduce them
significantly. The only generic code modifications regard mtrr setups
(see the last two patches in the series).
This series depends on two other patch series not yet applied but
already sent to the list for comments a little while back:
Konrad's "Xen PCI frontend driver" series
http://lkml.org/lkml/2010/8/4/374
my "PV on HVM: receive interrupts as xen events" series
http://lkml.org/lkml/2010/8/30/170
The list of patches with a diffstat follows:
Ian Campbell (1):
xen: use host E820 map for dom0
Jeremy Fitzhardinge (3):
xen: remap GSIs as pirqs when running as initial domain
xen: map a dummy page for local apic and ioapic in xen_set_fixmap
xen: make hvc_xen console work for dom0.
Juan Quintela (2):
xen: Initialize xenbus for dom0.
xen: add the direct mapping area for ISA bus access
Qing He (1):
xen: remap MSIs into pirqs when running as initial domain
Stefano Stabellini (2):
xen: use vcpu_ops to setup cpu masks
xen: introduce XEN_DOM0 as a silent option
Stephen Tweedie (3):
xen: add support for the platform_ops hypercall
x86/mtrr: Extend mtrr_if to include num_var_ranges
xen/mtrr: Add mtrr_if support for Xen mtrr
arch/x86/include/asm/xen/hypercall.h | 8 ++
arch/x86/kernel/cpu/mtrr/Makefile | 2 +-
arch/x86/kernel/cpu/mtrr/amd.c | 6 +
arch/x86/kernel/cpu/mtrr/centaur.c | 6 +
arch/x86/kernel/cpu/mtrr/cyrix.c | 6 +
arch/x86/kernel/cpu/mtrr/generic.c | 8 ++
arch/x86/kernel/cpu/mtrr/main.c | 20 +---
arch/x86/kernel/cpu/mtrr/mtrr.h | 8 ++
arch/x86/kernel/cpu/mtrr/xen.c | 110 +++++++++++++++++++
arch/x86/pci/xen.c | 199 ++++++++++++++++++++++++++++++----
arch/x86/xen/Kconfig | 5 +
arch/x86/xen/enlighten.c | 1 +
arch/x86/xen/mmu.c | 47 ++++++++-
arch/x86/xen/setup.c | 46 ++++++++-
arch/x86/xen/smp.c | 8 ++-
drivers/char/hvc_xen.c | 98 +++++++++++------
drivers/xen/events.c | 73 ++++++++++++-
drivers/xen/xenbus/xenbus_probe.c | 29 +++++-
include/xen/events.h | 5 +
include/xen/interface/memory.h | 28 +++++
include/xen/interface/physdev.h | 10 ++
include/xen/interface/platform.h | 96 ++++++++++++++++
22 files changed, 741 insertions(+), 78 deletions(-)
A git tree with this and the other two series on top of Linux 2.6.36-rc1
is available here:
git://xenbits.xen.org/people/sstabellini/linux-pvhvm.git 2.6.36-rc1-initial-domain
Cheers,
Stefano Stabellini
next reply other threads:[~2010-09-28 12:16 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-28 12:16 Stefano Stabellini [this message]
2010-09-28 12:16 ` [PATCH 01/12] xen: remap GSIs as pirqs when running as initial domain stefano.stabellini
2010-09-28 12:16 ` [PATCH 02/12] xen: remap MSIs into " stefano.stabellini
2010-09-28 12:16 ` [PATCH 03/12] xen: map a dummy page for local apic and ioapic in xen_set_fixmap stefano.stabellini
2010-09-28 12:16 ` [PATCH 04/12] xen: use vcpu_ops to setup cpu masks stefano.stabellini
2010-09-28 12:16 ` [PATCH 05/12] xen: Initialize xenbus for dom0 stefano.stabellini
2010-09-28 12:16 ` [PATCH 06/12] xen: add the direct mapping area for ISA bus access stefano.stabellini
2010-09-28 12:16 ` [PATCH 07/12] xen: introduce XEN_DOM0 as a silent option stefano.stabellini
2010-09-28 12:16 ` [PATCH 08/12] xen: use host E820 map for dom0 stefano.stabellini
2010-09-28 12:16 ` [PATCH 09/12] xen: make hvc_xen console work " stefano.stabellini
2010-09-28 12:16 ` [PATCH 10/12] xen: add support for the platform_ops hypercall stefano.stabellini
2010-09-28 12:16 ` [PATCH 11/12] x86/mtrr: Extend mtrr_if to include num_var_ranges stefano.stabellini
2010-09-28 12:16 ` [PATCH 12/12] xen/mtrr: Add mtrr_if support for Xen mtrr stefano.stabellini
2010-09-28 12:39 ` Ingo Molnar
2010-09-28 14:00 ` Stefano Stabellini
2010-09-28 17:13 ` Jeremy Fitzhardinge
2010-09-28 17:19 ` Stefano Stabellini
2010-09-28 17:56 ` H. Peter Anvin
2010-09-28 18:13 ` Jeremy Fitzhardinge
2010-09-28 18:19 ` H. Peter Anvin
2010-09-28 18:24 ` Jeremy Fitzhardinge
2010-09-28 18:46 ` H. Peter Anvin
2010-09-28 18:58 ` Jeremy Fitzhardinge
2010-09-28 19:05 ` H. Peter Anvin
2010-09-28 17:14 ` Jeremy Fitzhardinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.00.1009281217540.2864@kaball-desktop \
--to=stefano.stabellini@eu.citrix.com \
--cc=Jeremy.Fitzhardinge@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®