From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>,
"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] hvc_xen: support PV on HVM consoles
Date: Fri, 27 Jan 2012 15:29:06 +0000 [thread overview]
Message-ID: <alpine.DEB.2.00.1201271427080.3196@kaball-desktop> (raw)
In-Reply-To: <20120127140234.GA32469@phenom.dumpdata.com>
On Fri, 27 Jan 2012, Konrad Rzeszutek Wilk wrote:
> On Thu, Jan 26, 2012 at 12:43:26PM +0000, Stefano Stabellini wrote:
> > Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> > ---
> > drivers/tty/hvc/hvc_xen.c | 86 +++++++++++++++++++++++++++++-------
> > include/xen/interface/hvm/params.h | 6 ++-
> > 2 files changed, 75 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
> > index 52fdf60..dd6641f 100644
> > --- a/drivers/tty/hvc/hvc_xen.c
> > +++ b/drivers/tty/hvc/hvc_xen.c
> > @@ -24,9 +24,12 @@
> > #include <linux/init.h>
> > #include <linux/types.h>
> >
> > +#include <asm/io.h>
> > #include <asm/xen/hypervisor.h>
> >
> > #include <xen/xen.h>
> > +#include <xen/interface/xen.h>
> > +#include <xen/hvm.h>
> > #include <xen/page.h>
> > #include <xen/events.h>
> > #include <xen/interface/io/console.h>
> > @@ -42,9 +45,13 @@ static int xencons_irq;
> > /* ------------------------------------------------------------------ */
> >
> > static unsigned long console_pfn = ~0ul;
> > +static unsigned int console_evtchn = ~0ul;
> > +static struct xencons_interface *xencons_if = NULL;
> >
> > static inline struct xencons_interface *xencons_interface(void)
> > {
> > + if (xencons_if != NULL)
> > + return xencons_if;
> > if (console_pfn == ~0ul)
> > return mfn_to_virt(xen_start_info->console.domU.mfn);
> > else
> > @@ -54,7 +61,10 @@ static inline struct xencons_interface *xencons_interface(void)
> > static inline void notify_daemon(void)
> > {
> > /* Use evtchn: this is called early, before irq is set up. */
> > - notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
> > + if (console_evtchn == ~0ul)
> > + notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
> > + else
> > + notify_remote_via_evtchn(console_evtchn);
> > }
> >
> > static int __write_console(const char *data, int len)
> > @@ -157,28 +167,65 @@ static struct hv_ops dom0_hvc_ops = {
> > .notifier_hangup = notifier_hangup_irq,
> > };
> >
> > +static int xen_hvm_console_init(void)
> > +{
> > + int r;
> > + uint64_t v = 0;
> > + unsigned long mfn;
> > +
> > + if (!xen_hvm_domain())
> > + return -ENODEV;
> > +
> > + if (xencons_if != NULL)
> > + return -EBUSY;
> > +
> > + r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v);
> > + if (r < 0)
> > + return -ENODEV;
> > + console_evtchn = v;
> > + hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v);
> > + if (r < 0)
> > + return -ENODEV;
>
> If we fail here, the console_evtchn is still going to be set
> meaning that "notify_daemon" will use the event channel. Thought
> I can't think of the notify daemon being called after the init had
> failed so this might not be an issue.
>
> > + mfn = v;
> > + xencons_if = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE);
> > + if (xencons_if == NULL)
> > + return -ENODEV;
>
> Ditto. If we fail, we have the 'console_evtchn' set to something
> else than ~0UL.
Like you wrote, I think it doesn't matter.
> > + return 0;
> > +}
> > +
> > static int __init xen_hvc_init(void)
> > {
> > struct hvc_struct *hp;
> > struct hv_ops *ops;
> > + int r;
> >
> > - if (!xen_pv_domain())
> > + if (!xen_domain())
> > + return -ENODEV;
> > +
> > + if (xen_pv_domain() && !xen_initial_domain() &&
> > + !xen_start_info->console.domU.evtchn)
>
> Ewww.. What about just leaving the check:
> > return -ENODEV;
> >
> > if (xen_initial_domain()) {
> > ops = &dom0_hvc_ops;
> > xencons_irq = bind_virq_to_irq(VIRQ_CONSOLE, 0);
> > } else {
> > - if (!xen_start_info->console.domU.evtchn)
> > - return -ENODEV;
>
> this one as 'if (xen_pv_domain()) && !xen-..)
>
> That might make the code nicer to read?
Yes, good idea.
next prev parent reply other threads:[~2012-01-27 15:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-26 12:42 [PATCH 0/2] Xen (PV and HVM) multiple PV consoles Stefano Stabellini
2012-01-26 12:43 ` [PATCH 1/2] hvc_xen: support PV on HVM consoles Stefano Stabellini
2012-01-27 14:02 ` Konrad Rzeszutek Wilk
2012-01-27 15:29 ` Stefano Stabellini [this message]
2012-01-26 12:43 ` [PATCH 2/2] hvc_xen: implement multiconsole support Stefano Stabellini
2012-01-27 16:03 ` [Xen-devel] " Konrad Rzeszutek Wilk
2012-01-27 17:16 ` Stefano Stabellini
2012-01-27 18:36 ` Konrad Rzeszutek Wilk
2012-01-27 18:37 ` Konrad Rzeszutek Wilk
-- strict thread matches above, loose matches on Subject: below --
2010-12-01 18:25 [PATCH 0/2] Xen PV on HVM multiple PV consoles Stefano Stabellini
2010-12-01 18:26 ` [PATCH 1/2] hvc_xen: support PV on HVM consoles stefano.stabellini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.00.1201271427080.3196@kaball-desktop \
--to=stefano.stabellini@eu.citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®