mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Georgiewskiy Yuriy <bottleman@icf.org.ru>
To: Steven Rostedt <rostedt@goodmis.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
	RT <linux-rt-users@vger.kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Clark Williams <williams@redhat.com>,
	John Kacur <jkacur@redhat.com>
Subject: Re: [ANNOUNCE] 3.0.14-rt31
Date: Wed, 4 Jan 2012 19:19:15 +0400 (MSK)	[thread overview]
Message-ID: <alpine.DEB.2.02.1201041918280.7983@icf.org.ru> (raw)
In-Reply-To: <1324571011.5916.141.camel@gandalf.stny.rr.com>

[-- Attachment #1: Type: TEXT/PLAIN, Size: 876 bytes --]

On 2011-12-22 11:23 -0500, Steven Rostedt wrote Georgiewskiy Yuriy:

SR>On Thu, 2011-12-22 at 19:29 +0400, Georgiewskiy Yuriy wrote:
SR>> On 2011-12-22 09:44 -0500, Steven Rostedt wrote Georgiewskiy Yuriy:
SR>> 
SR>> Hi, config in attachment.
SR>> 
SR>
SR>I didn't reproduce it. Does it happen all the time? Do you always get
SR>that strange backtrace. If you get something saner, could you print that
SR>out. Could you also send me your full dmesg.

Hi, full dmesg.

C уважением                       With Best Regards
Георгиевский Юрий.                Georgiewskiy Yuriy
+7 4872 711666                    +7 4872 711666
факс +7 4872 711143               fax +7 4872 711143
Компания ООО "Ай Ти Сервис"       IT Service Ltd
http://nkoort.ru                  http://nkoort.ru
JID: GHhost@icf.org.ru            JID: GHhost@icf.org.ru
YG129-RIPE                        YG129-RIPE

[-- Attachment #2: Type: APPLICATION/octet-stream, Size: 68378 bytes --]

[    0.000000] Linux version 3.0.15-rt31-r235 (root@mosch) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 PREEMPT RT Wed Jan 4 01:16:21 MSK 2012
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffd0000 - 000000007ffdf000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffdf000 - 0000000080000000 (ACPI NVS)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI: Itronix Corp IX260+                /P16D, BIOS Ver.190 04/11/2006
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] Warning only 2047MB will be used.
[    0.000000] Use a HIGHMEM enabled kernel.
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [7809c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-000000007ffa1000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 007fc00000 page 2M
[    0.000000]  007fc00000 - 007ffa1000 page 4k
[    0.000000] kernel direct mapping tables up to 7ffa1000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 00860000 - 01000000
[    0.000000] ACPI: RSDP 000f65d0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 7ffd0100 00044 (v01 A M I  OEMXSDT  04000611 MSFT 00000097)
[    0.000000] ACPI: FACP 7ffd0290 000F4 (v03 A M I  OEMFACP  04000611 MSFT 00000097)
[    0.000000] ACPI: DSDT 7ffd03f0 06641 (v01  P16D1 P16D1190 00000190 INTL 02002026)
[    0.000000] ACPI: FACS 7ffdf000 00040
[    0.000000] ACPI: APIC 7ffd0390 00054 (v01 A M I  OEMAPIC  04000611 MSFT 00000097)
[    0.000000] ACPI: OEMB 7ffdf040 00040 (v01 A M I  AMI_OEM  04000611 MSFT 00000097)
[    0.000000] ACPI: SSDT 7ffd6a40 003A3 (v01    AMI   CPU1PM 00000001 INTL 02002026)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2047MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 7ffa1000
[    0.000000]   low ram: 0 - 7ffa1000
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000010 -> 0x0007ffa1
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffa1
[    0.000000] On node 0 totalpages: 524080
[    0.000000] free_area_init_node: node 0, pgdat 7939c240, node_mem_map f6fa1200
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 519984 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519984
[    0.000000] Kernel command line: BOOT_IMAGE=Linux-RT-Test ro root=901 rootfstype=ext4 hpet=force clocksource=hpet pci=assign-busses,routeirq,use_crs acpi_sleep=s3_bios md=1,1,0,0,/dev/sda1,/dev/sdb1 resume=/dev/md0 libata.force=1:40c,udma44 usbcore.autosuspend=1 no_console_suspend
[    0.000000] md: Will configure md1 (super-block) from 1,0,0,/dev/sda1,/dev/sdb1, below.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 2066032k/2096772k available (2922k kernel code, 30288k reserved, 787k data, 392k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
[    0.000000]     vmalloc : 0xf87a1000 - 0xfffa1000   ( 120 MB)
[    0.000000]     lowmem  : 0x78000000 - 0xf7fa1000   (2047 MB)
[    0.000000]       .init : 0x793a0000 - 0x79402000   ( 392 kB)
[    0.000000]       .data : 0x792daaa2 - 0x7939f840   ( 787 kB)
[    0.000000]       .text : 0x79000000 - 0x792daaa2   (2922 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:288
[    0.000000] CPU 0 irqstacks, hard=f6808000 soft=f680a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1785.919 MHz processor.
[    0.006668] Calibrating delay loop (skipped), value calculated using timer frequency.. 3573.66 BogoMIPS (lpj=5953063)
[    0.006673] pid_max: default: 32768 minimum: 301
[    0.006711] Mount-cache hash table entries: 512
[    0.006803] Disabled fast string operations
[    0.006809] mce: CPU supports 5 MCE banks
[    0.006817] CPU0: Thermal monitoring enabled (TM1)
[    0.006825] CPU: Intel(R) Pentium(R) M processor 1.80GHz stepping 06
[    0.006846] ACPI: Core revision 20110413
[    0.012087] Performance Events: p6 PMU driver.
[    0.012094] ... version:                0
[    0.012095] ... bit width:              32
[    0.012097] ... generic registers:      2
[    0.012098] ... value mask:             00000000ffffffff
[    0.012100] ... max period:             000000007fffffff
[    0.012101] ... fixed-purpose events:   0
[    0.012103] ... event mask:             0000000000000003
[    0.012316] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.150026] devtmpfs: initialized
[    0.150103] PM: Registering ACPI NVS region at 7ffdf000 (135168 bytes)
[    0.150171] NET: Registered protocol family 16
[    0.150248] EISA bus registered
[    0.150257] ACPI: bus type pci registered
[    0.151334] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.151336] PCI: Using configuration type 1 for base access
[    0.151764] bio: create slab <bio-0> at 0
[    0.152655] ACPI: EC: Look up EC in DSDT
[    0.153671] ACPI: Executed 2 blocks of module-level executable AML code
[    0.156104] ACPI: Interpreter enabled
[    0.156111] ACPI: (supports S0 S3 S4 S5)
[    0.156129] ACPI: Using IOAPIC for interrupt routing
[    0.173526] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.173638] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.173638] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.173692] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.176772] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.176775] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.176778] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.176781] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.176783] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
[    0.176799] pci 0000:00:00.0: [8086:3580] type 0 class 0x000600
[    0.176807] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.176841] pci 0000:00:00.1: [8086:3584] type 0 class 0x000880
[    0.176877] pci 0000:00:00.3: [8086:3585] type 0 class 0x000880
[    0.176915] pci 0000:00:01.0: [8086:3581] type 1 class 0x000604
[    0.176963] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[    0.177001] pci 0000:00:1d.0: reg 20: [io  0xe800-0xe81f]
[    0.177029] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[    0.177067] pci 0000:00:1d.1: reg 20: [io  0xe880-0xe89f]
[    0.177095] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[    0.177133] pci 0000:00:1d.2: reg 20: [io  0xec00-0xec1f]
[    0.177171] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[    0.177190] pci 0000:00:1d.7: reg 10: [mem 0xe02ffc00-0xe02fffff]
[    0.177259] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.177264] pci 0000:00:1d.7: PME# disabled
[    0.177279] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.177314] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[    0.177369] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.177387] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[    0.177399] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.177408] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.177416] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.177425] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.177434] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.177443] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.177470] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[    0.177483] pci 0000:00:1f.5: reg 10: [io  0xd800-0xd8ff]
[    0.177491] pci 0000:00:1f.5: reg 14: [io  0xe000-0xe03f]
[    0.177499] pci 0000:00:1f.5: reg 18: [mem 0xe02ff800-0xe02ff9ff]
[    0.177507] pci 0000:00:1f.5: reg 1c: [mem 0xe02ff400-0xe02ff4ff]
[    0.177539] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.177543] pci 0000:00:1f.5: PME# disabled
[    0.177556] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[    0.177570] pci 0000:00:1f.6: reg 10: [io  0xe400-0xe4ff]
[    0.177578] pci 0000:00:1f.6: reg 14: [io  0xe080-0xe0ff]
[    0.177620] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.177624] pci 0000:00:1f.6: PME# disabled
[    0.177653] pci 0000:01:00.0: [1002:4c66] type 0 class 0x000300
[    0.177666] pci 0000:01:00.0: reg 10: [mem 0xb0000000-0xb7ffffff pref]
[    0.177673] pci 0000:01:00.0: reg 14: [io  0xb000-0xb0ff]
[    0.177680] pci 0000:01:00.0: reg 18: [mem 0xe00f0000-0xe00fffff]
[    0.177701] pci 0000:01:00.0: reg 30: [mem 0xe00c0000-0xe00dffff pref]
[    0.177716] pci 0000:01:00.0: supports D1 D2
[    0.177743] pci 0000:00:01.0: PCI bridge to [bus 01-ff]
[    0.177747] pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
[    0.177750] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
[    0.177754] pci 0000:00:01.0:   bridge window [mem 0xaff00000-0xbfefffff pref]
[    0.177778] pci 0000:02:01.0: [168c:0029] type 0 class 0x000280
[    0.177792] pci 0000:02:01.0: reg 10: [mem 0xe01f0000-0xe01fffff]
[    0.177845] pci 0000:02:01.0: PME# supported from D0 D3hot
[    0.177849] pci 0000:02:01.0: PME# disabled
[    0.177863] pci 0000:02:02.0: [10ec:8139] type 0 class 0x000200
[    0.177877] pci 0000:02:02.0: reg 10: [io  0xc800-0xc8ff]
[    0.177886] pci 0000:02:02.0: reg 14: [mem 0xe01efc00-0xe01efcff]
[    0.177931] pci 0000:02:02.0: supports D1 D2
[    0.177933] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
[    0.177937] pci 0000:02:02.0: PME# disabled
[    0.177952] pci 0000:02:03.0: [1217:7114] type 2 class 0x000607
[    0.177967] pci 0000:02:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.177982] pci 0000:02:03.0: supports D1 D2
[    0.177984] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.177988] pci 0000:02:03.0: PME# disabled
[    0.178003] pci 0000:02:03.1: [1217:7114] type 2 class 0x000607
[    0.178018] pci 0000:02:03.1: reg 10: [mem 0x00000000-0x00000fff]
[    0.178033] pci 0000:02:03.1: supports D1 D2
[    0.178035] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.178039] pci 0000:02:03.1: PME# disabled
[    0.178062] pci 0000:02:05.0: [1180:0475] type 2 class 0x000607
[    0.178075] pci 0000:02:05.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.178089] pci 0000:02:05.0: supports D1 D2
[    0.178092] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.178095] pci 0000:02:05.0: PME# disabled
[    0.178109] pci 0000:02:05.1: [1180:0551] type 0 class 0x000c00
[    0.178123] pci 0000:02:05.1: reg 10: [mem 0xe01ef000-0xe01ef7ff]
[    0.178172] pci 0000:02:05.1: PME# supported from D0 D3hot D3cold
[    0.178176] pci 0000:02:05.1: PME# disabled
[    0.178211] pci 0000:00:1e.0: PCI bridge to [bus 02-ff] (subtractive decode)
[    0.178215] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.178219] pci 0000:00:1e.0:   bridge window [mem 0xe0100000-0xe01fffff]
[    0.178224] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.178227] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.178230] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.178233] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.178236] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.178239] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[    0.178325] pci_bus 0000:00: on NUMA node 0
[    0.178328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.178415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.178441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.178510]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.181731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *9 11 12 14 15)
[    0.181786] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *9 11 12 14 15)
[    0.181838] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *9 11 12 14 15)
[    0.181889] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *9 11 12 14 15)
[    0.181943] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 9 11 12 14 15) *0, disabled.
[    0.181995] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *9 11 12 14 15)
[    0.182047] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 9 11 12 14 15) *0, disabled.
[    0.182099] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 9 11 12 14 15)
[    0.182180] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.182185] vgaarb: loaded
[    0.182186] vgaarb: bridge control possible 0000:01:00.0
[    0.182275] SCSI subsystem initialized
[    0.182315] libata version 3.00 loaded.
[    0.182381] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.182383] PCI: Using ACPI for IRQ routing
[    0.182386] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[    0.182396] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.182400] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.182404] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.182408] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.182412] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.182416] pci 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.182420] pci 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.182423] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.182427] pci 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.182430] pci 0000:02:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.182434] pci 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.182438] pci 0000:02:03.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.182441] pci 0000:02:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.182444] pci 0000:02:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.182447] PCI: pci_cache_line_size set to 64 bytes
[    0.182501] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.182504] reserve RAM buffer: 000000007ffd0000 - 000000007fffffff 
[    0.182721] hpet clockevent registered
[    0.182727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.182731] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.184330] Switching to clocksource hpet
[    0.184363] pnp: PnP ACPI init
[    0.184371] ACPI: bus type pnp registered
[    0.184439] pnp 00:00: [bus 00-ff]
[    0.184442] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.184445] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.184447] pnp 00:00: [io  0x0d00-0xffff window]
[    0.184450] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.184452] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.184455] pnp 00:00: [mem 0x80000000-0xffffffff window]
[    0.184490] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.184526] pnp 00:01: [mem 0xfeff0000-0xfeffffff]
[    0.184561] system 00:01: [mem 0xfeff0000-0xfeffffff] has been reserved
[    0.184564] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.184609] pnp 00:02: [dma 4]
[    0.184609] pnp 00:02: [io  0x0000-0x000f]
[    0.184609] pnp 00:02: [io  0x0081-0x0083]
[    0.184609] pnp 00:02: [io  0x0087]
[    0.184609] pnp 00:02: [io  0x0089-0x008b]
[    0.184609] pnp 00:02: [io  0x008f]
[    0.184609] pnp 00:02: [io  0x00c0-0x00df]
[    0.184609] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.184609] pnp 00:03: [io  0x0070-0x0071]
[    0.184609] pnp 00:03: [irq 8]
[    0.184609] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.184609] pnp 00:04: [io  0x0060]
[    0.184609] pnp 00:04: [io  0x0064]
[    0.184609] pnp 00:04: [irq 1]
[    0.184609] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.184624] pnp 00:05: [irq 12]
[    0.184651] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.184661] pnp 00:06: [io  0x0061]
[    0.184685] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.184694] pnp 00:07: [io  0x00f0-0x00ff]
[    0.184698] pnp 00:07: [irq 13]
[    0.184725] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.184988] pnp 00:08: [io  0x03f8-0x03ff]
[    0.184993] pnp 00:08: [irq 4]
[    0.184995] pnp 00:08: [dma 0 disabled]
[    0.185068] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.185237] Switched to NOHz mode on CPU #0
[    0.185343] pnp 00:09: [io  0x02f8-0x02ff]
[    0.185348] pnp 00:09: [irq 3]
[    0.185350] pnp 00:09: [dma 0 disabled]
[    0.185445] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.185701] pnp 00:0a: [io  0x02e8-0x02ef]
[    0.185705] pnp 00:0a: [irq 11]
[    0.185708] pnp 00:0a: [dma 0 disabled]
[    0.185774] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.185995] pnp 00:0b: [io  0x03f0-0x03f5]
[    0.185997] pnp 00:0b: [io  0x03f7]
[    0.186038] system 00:0b: [io  0x03f0-0x03f5] has been reserved
[    0.186041] system 00:0b: [io  0x03f7] has been reserved
[    0.186044] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.186198] pnp 00:0c: [io  0x0000-0xffffffff disabled]
[    0.186201] pnp 00:0c: [io  0x0680-0x06ff]
[    0.186240] system 00:0c: [io  0x0680-0x06ff] has been reserved
[    0.186243] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.186303] pnp 00:0d: [io  0x0010-0x0018]
[    0.186305] pnp 00:0d: [io  0x001f]
[    0.186307] pnp 00:0d: [io  0x0020-0x003f]
[    0.186309] pnp 00:0d: [io  0x0050-0x0052]
[    0.186311] pnp 00:0d: [io  0x0072-0x007f]
[    0.186313] pnp 00:0d: [io  0x0080]
[    0.186315] pnp 00:0d: [io  0x0084-0x0086]
[    0.186317] pnp 00:0d: [io  0x0088]
[    0.186319] pnp 00:0d: [io  0x008c-0x008e]
[    0.186321] pnp 00:0d: [io  0x0090-0x009f]
[    0.186325] pnp 00:0d: [io  0x00a2-0x00bf]
[    0.186327] pnp 00:0d: [io  0x0400-0x047f]
[    0.186329] pnp 00:0d: [io  0x04d0-0x04d1]
[    0.186331] pnp 00:0d: [io  0x0500-0x053f]
[    0.186333] pnp 00:0d: [io  0x0680-0x069f]
[    0.186335] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.186337] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.186339] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[    0.186342] pnp 00:0d: [mem 0xfff80000-0xffffffff]
[    0.186399] system 00:0d: [io  0x0400-0x047f] has been reserved
[    0.186403] system 00:0d: [io  0x04d0-0x04d1] has been reserved
[    0.186405] system 00:0d: [io  0x0500-0x053f] has been reserved
[    0.186408] system 00:0d: [io  0x0680-0x069f] has been reserved
[    0.186412] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.186415] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.186418] system 00:0d: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.186421] system 00:0d: [mem 0xfff80000-0xffffffff] has been reserved
[    0.186424] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.186556] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    0.186559] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
[    0.186561] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    0.186564] pnp 00:0e: [mem 0x00100000-0x7fffffff]
[    0.186566] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
[    0.186610] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.186613] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.186616] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.186620] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.187592] pnp: PnP ACPI: found 15 devices
[    0.187594] ACPI: ACPI bus type pnp unregistered
[    0.189052] PCI: max bus depth: 2 pci_try_num: 3
[    0.189072] pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x8bffffff pref]
[    0.189076] pci 0000:00:1f.1: BAR 5: assigned [mem 0x8c000000-0x8c0003ff]
[    0.189082] pci 0000:00:1f.1: BAR 5: set to [mem 0x8c000000-0x8c0003ff] (PCI address [0x8c000000-0x8c0003ff])
[    0.189086] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.189089] pci 0000:00:01.0:   bridge window [io  0x9000-0xbfff]
[    0.189093] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
[    0.189097] pci 0000:00:01.0:   bridge window [mem 0xaff00000-0xbfefffff pref]
[    0.189104] pci 0000:02:03.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
[    0.189108] pci 0000:02:03.0: BAR 10: assigned [mem 0x90000000-0x93ffffff]
[    0.189111] pci 0000:02:03.1: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
[    0.189115] pci 0000:02:03.1: BAR 10: assigned [mem 0x94000000-0x97ffffff]
[    0.189118] pci 0000:02:05.0: BAR 9: assigned [mem 0x88000000-0x8bffffff pref]
[    0.189122] pci 0000:02:05.0: BAR 10: assigned [mem 0x98000000-0x9bffffff]
[    0.189125] pci 0000:02:03.0: BAR 0: assigned [mem 0xe0100000-0xe0100fff]
[    0.189129] pci 0000:02:03.0: BAR 0: set to [mem 0xe0100000-0xe0100fff] (PCI address [0xe0100000-0xe0100fff])
[    0.189133] pci 0000:02:03.1: BAR 0: assigned [mem 0xe0101000-0xe0101fff]
[    0.189138] pci 0000:02:03.1: BAR 0: set to [mem 0xe0101000-0xe0101fff] (PCI address [0xe0101000-0xe0101fff])
[    0.189141] pci 0000:02:05.0: BAR 0: assigned [mem 0xe0102000-0xe0102fff]
[    0.189146] pci 0000:02:05.0: BAR 0: set to [mem 0xe0102000-0xe0102fff] (PCI address [0xe0102000-0xe0102fff])
[    0.189149] pci 0000:02:03.0: BAR 7: assigned [io  0xc000-0xc0ff]
[    0.189152] pci 0000:02:03.0: BAR 8: assigned [io  0xc400-0xc4ff]
[    0.189154] pci 0000:02:03.1: BAR 7: assigned [io  0xcc00-0xccff]
[    0.189158] pci 0000:02:03.1: BAR 8: assigned [io  0x1000-0x10ff]
[    0.189162] pci 0000:02:05.0: BAR 7: assigned [io  0x1400-0x14ff]
[    0.189166] pci 0000:02:05.0: BAR 8: assigned [io  0x1800-0x18ff]
[    0.189169] pci 0000:02:03.0: CardBus bridge to [bus 03-06]
[    0.189171] pci 0000:02:03.0:   bridge window [io  0xc000-0xc0ff]
[    0.189175] pci 0000:02:03.0:   bridge window [io  0xc400-0xc4ff]
[    0.189180] pci 0000:02:03.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.189184] pci 0000:02:03.0:   bridge window [mem 0x90000000-0x93ffffff]
[    0.189188] pci 0000:02:03.1: CardBus bridge to [bus 07-0a]
[    0.189191] pci 0000:02:03.1:   bridge window [io  0xcc00-0xccff]
[    0.189195] pci 0000:02:03.1:   bridge window [io  0x1000-0x10ff]
[    0.189199] pci 0000:02:03.1:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.189203] pci 0000:02:03.1:   bridge window [mem 0x94000000-0x97ffffff]
[    0.189208] pci 0000:02:05.0: CardBus bridge to [bus 0b-0e]
[    0.189210] pci 0000:02:05.0:   bridge window [io  0x1400-0x14ff]
[    0.189214] pci 0000:02:05.0:   bridge window [io  0x1800-0x18ff]
[    0.189218] pci 0000:02:05.0:   bridge window [mem 0x88000000-0x8bffffff pref]
[    0.189222] pci 0000:02:05.0:   bridge window [mem 0x98000000-0x9bffffff]
[    0.189226] pci 0000:00:1e.0: PCI bridge to [bus 02-0e]
[    0.189230] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.189235] pci 0000:00:1e.0:   bridge window [mem 0xe0100000-0xe01fffff]
[    0.189239] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x8bffffff pref]
[    0.189254] pci 0000:00:1e.0: setting latency timer to 64
[    0.189261] pci 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.189268] pci 0000:02:03.1: enabling device (0080 -> 0083)
[    0.189272] pci 0000:02:03.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.189277] pci 0000:02:03.1: setting latency timer to 64
[    0.189283] pci 0000:02:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.189287] pci 0000:02:05.0: setting latency timer to 64
[    0.189291] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.189293] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.189296] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.189298] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.189301] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.189304] pci_bus 0000:01: resource 0 [io  0x9000-0xbfff]
[    0.189306] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe00fffff]
[    0.189309] pci_bus 0000:01: resource 2 [mem 0xaff00000-0xbfefffff pref]
[    0.189311] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.189314] pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe01fffff]
[    0.189317] pci_bus 0000:02: resource 2 [mem 0x80000000-0x8bffffff pref]
[    0.189319] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.189321] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.189324] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.189326] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[    0.189329] pci_bus 0000:02: resource 8 [mem 0x80000000-0xffffffff]
[    0.189332] pci_bus 0000:03: resource 0 [io  0xc000-0xc0ff]
[    0.189334] pci_bus 0000:03: resource 1 [io  0xc400-0xc4ff]
[    0.189336] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.189339] pci_bus 0000:03: resource 3 [mem 0x90000000-0x93ffffff]
[    0.189342] pci_bus 0000:07: resource 0 [io  0xcc00-0xccff]
[    0.189344] pci_bus 0000:07: resource 1 [io  0x1000-0x10ff]
[    0.189347] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.189349] pci_bus 0000:07: resource 3 [mem 0x94000000-0x97ffffff]
[    0.189352] pci_bus 0000:0b: resource 0 [io  0x1400-0x14ff]
[    0.189354] pci_bus 0000:0b: resource 1 [io  0x1800-0x18ff]
[    0.189357] pci_bus 0000:0b: resource 2 [mem 0x88000000-0x8bffffff pref]
[    0.189359] pci_bus 0000:0b: resource 3 [mem 0x98000000-0x9bffffff]
[    0.189386] NET: Registered protocol family 2
[    0.189422] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.189599] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.192144] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[    0.194887] TCP: Hash tables configured (established 262144 bind 65536)
[    0.194891] TCP reno registered
[    0.194902] UDP hash table entries: 1024 (order: 4, 65536 bytes)
[    0.195019] UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes)
[    0.195313] NET: Registered protocol family 1
[    0.195420] pci 0000:01:00.0: Boot video device
[    0.195437] PCI: CLS 64 bytes, default 64
[    0.195520] Unpacking initramfs...
[    0.433939] Freeing initrd memory: 7808k freed
[    0.450843] msgmni has been set to 4050
[    0.450998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.451001] io scheduler noop registered
[    0.451008] io scheduler bfq registered (default)
[    0.478710] ata_piix 0000:00:1f.1: version 2.13
[    0.478725] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.478733] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.478774] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.479050] scsi0 : ata_piix
[    0.479111] scsi1 : ata_piix
[    0.482049] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.482052] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.482173] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.490519] i8042: Detected active multiplexing controller, rev 1.0
[    0.492430] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.492436] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.492438] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.492441] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.492443] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.492570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.492696] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.492710] md: raid1 personality registered for level 1
[    0.492726] cpuidle: using governor ladder
[    0.492728] cpuidle: using governor menu
[    0.492753] ALSA device list:
[    0.492754]   No soundcards found.
[    0.492829] NET: Registered protocol family 17
[    0.492841] Registering the dns_resolver key type
[    0.492865] Using IPI Shortcut mode
[    0.650290] ata2.00: ATAPI: Optiarc DVD RW AD-7590A, 1.05, max UDMA/33
[    0.660249] ata1: FORCE: cable set to 40c
[    0.660255] ata1.00: CFA: TRANSCEND, 20090323, max UDMA/66
[    0.660257] ata1.00: 31326208 sectors, multi 0: LBA 
[    0.660263] ata1.01: CFA: TRANSCEND, 20080128, max UDMA/66
[    0.660265] ata1.01: 31326208 sectors, multi 0: LBA 
[    0.660269] ata1.00: limited to UDMA/33 due to 40-wire cable
[    0.660271] ata1.00: FORCE: xfer_mask set to udma44
[    0.660273] ata1.01: limited to UDMA/33 due to 40-wire cable
[    0.660275] ata1.01: FORCE: xfer_mask set to udma44
[    0.673624] ata1.00: configured for UDMA/44
[    0.680172] ata2.00: configured for UDMA/33
[    0.686805] ata1.01: configured for UDMA/44
[    0.686927] scsi 0:0:0:0: Direct-Access     ATA      TRANSCEND        2009 PQ: 0 ANSI: 5
[    0.687053] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.687178] scsi 0:0:1:0: Direct-Access     ATA      TRANSCEND        2008 PQ: 0 ANSI: 5
[    0.687286] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    0.687357] sd 0:0:0:0: [sda] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    0.687400] sd 0:0:0:0: [sda] Write Protect is off
[    0.687403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.687422] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.687933]  sda: sda1 sda2
[    0.688057] sd 0:0:1:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    0.688126] sd 0:0:1:0: [sdb] Write Protect is off
[    0.688129] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.688147] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.688660] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.688666]  sdb: sdb1 sdb2
[    0.688842] sd 0:0:1:0: [sdb] Attached SCSI disk
[    0.768627] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7590A  1.05 PQ: 0 ANSI: 5
[    0.768726] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[    0.769017] rtc_cmos 00:03: setting system clock to 2012-01-03 21:57:24 UTC (1325627844)
[    0.771398] Freeing unused kernel memory: 392k freed
[    0.771624] Write protecting the kernel text: 2924k
[    0.771635] Write protecting the kernel read-only data: 596k
[    0.833504] udev[65]: starting version 164
[    1.010099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.041362] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.041412] 8139too 0000:02:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.042207] 8139too 0000:02:02.0: eth0: RealTek RTL8139 at 0xf8802c00, 00:40:45:2b:70:4b, IRQ 19
[    1.045685] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.045689] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.047570] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.048594] thermal LNXTHERM:00: registered as thermal_zone0
[    1.048597] ACPI: Thermal Zone [THRM] (67 C)
[    1.450014] Refined TSC clocksource calibration: 1786.193 MHz.
[    5.099056] Btrfs loaded
[    5.107231] md: raid0 personality registered for level 0
[    5.122672] md: md1 stopped.
[    5.125539] md: bind<sdb1>
[    5.125859] md: bind<sda1>
[    5.127488] bio: create slab <bio-1> at 1
[    5.127546] md/raid1:md1: active with 2 out of 2 mirrors
[    5.127568] md1: detected capacity change from 0 to 15495790592
[    5.128998]  md1:
[    5.155227] md: md0 stopped.
[    5.157865] md: bind<sda2>
[    5.158228] md: bind<sdb2>
[    5.160074] md/raid0:md0: looking at sdb2
[    5.160077] md/raid0:md0:   comparing sdb2(1056768) with sdb2(1056768)
[    5.160080] md/raid0:md0:   END
[    5.160081] md/raid0:md0:   ==> UNIQUE
[    5.160083] md/raid0:md0: 1 zones
[    5.160085] md/raid0:md0: looking at sda2
[    5.160087] md/raid0:md0:   comparing sda2(1056768) with sdb2(1056768)
[    5.160089] md/raid0:md0:   EQUAL
[    5.160091] md/raid0:md0: FINAL 1 zones
[    5.160094] md/raid0:md0: done.
[    5.160096] md/raid0:md0: md_size is 2113536 sectors.
[    5.160098] ******* md0 configuration *********
[    5.160100] zone0=[sdb2/sda2/]
[    5.160103]         zone offset=0kb device offset=0kb size=1056768kb
[    5.160105] **********************************
[    5.160106] 
[    5.160116] md0: detected capacity change from 0 to 1082130432
[    5.178003]  md0: unknown partition table
[    5.571109] PM: Starting manual resume from disk
[    5.588157] EXT4-fs (md1): mounted filesystem without journal. Opts: (null)
[    6.148535] udev[387]: starting version 164
[    6.587974] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    6.613575] yenta_cardbus 0000:02:03.0: CardBus bridge found [14ff:060b]
[    6.613593] yenta_cardbus 0000:02:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[    6.613922] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    6.613929] ACPI: Power Button [PWRB]
[    6.613991] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    6.614053] ACPI: Lid Switch [LIDD]
[    6.614099] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    6.614103] ACPI: Sleep Button [SLPB]
[    6.614149] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.614152] ACPI: Power Button [PWRF]
[    6.655062] Linux agpgart interface v0.103
[    6.657246] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[    6.658428] ACPI: acpi_idle registered with cpuidle
[    6.658718] Marking TSC unstable due to TSC halts in idle
[    6.710412] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    6.743262] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.754348] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0cb8, PCI irq 20
[    6.754352] yenta_cardbus 0000:02:03.0: Socket status: 30000820
[    6.754360] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [io  0xc000-0xcfff]
[    6.754364] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xc800-0xc8ff 0xcc00-0xccff
[    6.766628] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe01fffff]
[    6.766634] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0100000-0xe01fffff: excluding 0xe0100000-0xe010ffff 0xe01e0000-0xe01fffff
[    6.766647] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8bffffff pref]
[    6.766650] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x8bffffff: excluding 0x80000000-0x8bffffff
[    6.773475] yenta_cardbus 0000:02:03.1: CardBus bridge found [14ff:060b]
[    6.788441] [drm] Initialized drm 1.1.0 20060810
[    6.877877] [drm] radeon kernel modesetting enabled.
[    6.877947] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    6.879628] [drm] initializing kernel modesetting (RV250 0x1002:0x4C66 0x14FF:0x0311).
[    6.879646] [drm] register mmio base: 0xE00F0000
[    6.879647] [drm] register mmio size: 65536
[    6.881635] [drm] AGP mode requested: 1
[    6.881640] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    6.881655] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
[    6.881685] radeon 0000:01:00.0: putting AGP V2 device into 1x mode
[    6.881714] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
[    6.881721] radeon 0000:01:00.0: VRAM: 128M 0x00000000B0000000 - 0x00000000B7FFFFFF (64M used)
[    6.881732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.881733] [drm] Driver supports precise vblank timestamp query.
[    6.881774] [drm] radeon: irq initialized.
[    6.883279] [drm] Detected VRAM RAM=128M, BAR=128M
[    6.883282] [drm] RAM width 128bits DDR
[    6.883379] [TTM] Zone  kernel: Available graphics memory: 1037116 kiB.
[    6.883381] [TTM] Initializing pool allocator.
[    6.883410] [drm] radeon: 64M of VRAM memory ready
[    6.883412] [drm] radeon: 256M of GTT memory ready.
[    6.884224] radeon 0000:01:00.0: WB disabled
[    6.884690] [drm] Loading R200 Microcode
[    6.934781] [drm] radeon: ring at 0x00000000D0001000
[    6.934800] [drm] ring test succeeded in 1 usecs
[    6.934978] [drm] radeon: ib pool ready.
[    6.935517] [drm] ib test succeeded in 0 usecs
[    6.939752] [drm] Panel ID String: 1024x768                
[    6.939755] [drm] Panel Size 1024x768
[    6.946154] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.946161] ACPI: Battery Slot [BAT1] (battery present)
[    6.949986] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.952228] [drm] radeon legacy LVDS backlight initialized
[    6.952403] [drm] Radeon Display Connectors
[    6.952405] [drm] Connector 0:
[    6.952407] [drm]   VGA
[    6.952409] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    6.952411] [drm]   Encoders:
[    6.952413] [drm]     CRT1: INTERNAL_DAC1
[    6.952414] [drm] Connector 1:
[    6.952416] [drm]   LVDS
[    6.952417] [drm]   Encoders:
[    6.952418] [drm]     LCD1: INTERNAL_LVDS
[    6.952419] [drm] Connector 2:
[    6.952421] [drm]   S-video
[    6.952422] [drm]   Encoders:
[    6.952423] [drm]     TV1: INTERNAL_DAC2
[    6.953530] ACPI: AC Adapter [AC0] (on-line)
[    6.957131] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    6.957142] ACPI: Battery Slot [BAT2] (battery absent)
[    6.961329] ata1.00: limited to UDMA/33 due to 40-wire cable
[    6.961333] ata1.00: FORCE: xfer_mask set to udma44
[    6.961335] ata1.01: limited to UDMA/33 due to 40-wire cable
[    6.961337] ata1.01: FORCE: xfer_mask set to udma44
[    6.966870] ata1.00: configured for UDMA/44
[    6.974944] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[    6.980146] ata1.01: configured for UDMA/44
[    6.980153] ata1: EH complete
[    7.009252] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0ca8, PCI irq 20
[    7.009256] yenta_cardbus 0000:02:03.1: Socket status: 30000410
[    7.009263] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [io  0xc000-0xcfff]
[    7.009267] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc000-0xcfff: excluding 0xc000-0xc0ff
[    7.014544] Calling CRDA to update world regulatory domain
[    7.016900]  0xc400-0xc4ff 0xc800-0xc8ff
[    7.019763] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.019781] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    7.024033]  0xcc00-0xccff
[    7.024895] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe01fffff]
[    7.024900] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0100000-0xe01fffff: excluding 0xe0100000-0xe010ffff 0xe01e0000-0xe01fffff
[    7.024912] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8bffffff pref]
[    7.024915] pcmcia_socket pcmcia_socket1: cs: memory probe 0x80000000-0x8bffffff: excluding 0x80000000-0x8bffffff
[    7.033531] yenta_cardbus 0000:02:05.0: CardBus bridge found [14ff:060a]
[    7.045881] [drm] fb mappable at 0xB0040000
[    7.045884] [drm] vram apper at 0xB0000000
[    7.045885] [drm] size 3145728
[    7.045887] [drm] fb depth is 24
[    7.045888] [drm]    pitch is 4096
[    7.046160] fbcon: radeondrmfb (fb0) is primary device
[    7.101611] Console: switching to colour frame buffer device 128x48
[    7.119730] fb0: radeondrmfb frame buffer device
[    7.119733] drm: registered panic notifier
[    7.119741] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[    7.136807] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    7.169100] World regulatory domain updated:
[    7.169103]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    7.169107]     (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[    7.169110]     (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[    7.264244] yenta_cardbus 0000:02:05.0: ISA IRQ mask 0x0c80, PCI irq 16
[    7.264247] yenta_cardbus 0000:02:05.0: Socket status: 30000810
[    7.264256] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [io  0xc000-0xcfff]
[    7.264259] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc000-0xcfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xc800-0xc8ff 0xcc00-0xccff
[    7.268957] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [mem 0xe0100000-0xe01fffff]
[    7.268961] pcmcia_socket pcmcia_socket2: cs: memory probe 0xe0100000-0xe01fffff: excluding 0xe0100000-0xe010ffff 0xe01e0000-0xe01fffff
[    7.268973] yenta_cardbus 0000:02:05.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x8bffffff pref]
[    7.268977] pcmcia_socket pcmcia_socket2: cs: memory probe 0x80000000-0x8bffffff: excluding 0x80000000-0x8bffffff
[    7.269276] ath9k 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    7.292171] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2e8-0x2ff 0x370-0x377
[    7.293767] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x47f 0x4d0-0x4d7
[    7.294146] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[    7.294724] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[    7.295358] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    7.295409] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    7.295458] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    7.295511] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3c0-0x3d2: excluding 0x3c0-0x3d7
[    7.295559] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3d4-0x3df: excluding 0x3d4-0x3e3
[    7.295605] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
[    7.326877] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2e8-0x2ff 0x370-0x377
[    7.328452] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x47f 0x4d0-0x4d7
[    7.330214] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean.
[    7.330796] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean.
[    7.333813] pcmcia_socket pcmcia_socket2: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    7.333864] pcmcia_socket pcmcia_socket2: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    7.333914] pcmcia_socket pcmcia_socket2: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    7.333968] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3c0-0x3d2: excluding 0x3c0-0x3d7
[    7.334015] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3d4-0x3df: excluding 0x3d4-0x3e3
[    7.334062] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
[    7.520098] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    7.656679] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[    7.656698] pci 0000:03:00.0: [1033:0035] type 0 class 0x000c03
[    7.656720] pci 0000:03:00.0: reg 10: [mem 0x00000000-0x00000fff]
[    7.656797] pci 0000:03:00.0: supports D1 D2
[    7.656799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    7.656805] pci 0000:03:00.0: PME# disabled
[    7.656828] pci 0000:03:00.0: BAR 0: assigned [mem 0x90000000-0x90000fff]
[    7.656834] pci 0000:03:00.0: BAR 0: set to [mem 0x90000000-0x90000fff] (PCI address [0x90000000-0x90000fff])
[    7.657037] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2e0-0x2ef 0x2f8-0x2ff 0x370-0x377
[    7.658969] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x47f 0x4d0-0x4d7
[    7.659353] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    7.659933] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    7.660776] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    7.660826] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    7.660876] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[    7.660929] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3c0-0x3d2: excluding 0x3c0-0x3d7
[    7.660977] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3d4-0x3df: excluding 0x3d4-0x3e3
[    7.661024] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
[    7.830094] serial8250: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A
[    7.860013] intel8x0_measure_ac97_clock: measured 53255 usecs (2566 samples)
[    7.860016] intel8x0: clocking to 48000
[    7.861253] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.861260] serial 0000:00:1f.6: PCI INT B disabled
[    7.866014] Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    7.867998] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio2/input/input6
[    7.877010] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[    7.894343] mousedev: PS/2 mouse device common for all mice
[    7.916701] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[    7.916708] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe0110000-0xe01dffff:
[    7.949814] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    8.023806]  clean.
[    8.029733] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    8.030117] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 3)
[    8.095399] 00:0a: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A
[    8.602816] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0/0x0
[    8.641266] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[    9.290013] pcmcia_socket pcmcia_socket2: pccard: PCMCIA card inserted into slot 2
[    9.290020] pcmcia_socket pcmcia_socket2: cs: memory probe 0xe0110000-0xe01dffff: excluding 0xe0110000-0xe011bfff
[    9.304345] pcmcia 2.0: pcmcia: registering new device pcmcia2.0 (IRQ: 7)
[    9.383598] scsi2 : pata_pcmcia
[    9.383699] ata3: PATA max PIO0 cmd 0xc100 ctl 0xc10e irq 7
[    9.534025] ath: EEPROM regdomain: 0x0
[    9.534028] ath: EEPROM indicates default country code should be used
[    9.534030] ath: doing EEPROM country->regdmn map search
[    9.534033] ath: country maps to regdmn code: 0x3a
[    9.534034] ath: Country alpha2 being used: US
[    9.534036] ath: Regpair used: 0x3a
[    9.550397] ata3.00: CFA: TS32GCF400, 20100805, max PIO4
[    9.550401] ata3.00: 62537328 sectors, multi 0: LBA 
[    9.557162] ata3.00: configured for PIO0
[    9.557260] scsi 2:0:0:0: Direct-Access     ATA      TS32GCF400       2010 PQ: 0 ANSI: 5
[    9.557532] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    9.557749] sd 2:0:0:0: [sdc] 62537328 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    9.557791] sd 2:0:0:0: [sdc] Write Protect is off
[    9.557795] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    9.557814] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    9.562446]  sdc: sdc1
[    9.562698] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    9.566058] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.566217] Registered led device: ath9k-phy0
[    9.566223] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8ee0000, irq=21
[    9.566410] Calling CRDA for country: US
[    9.582426] Regulatory domain changed to country: US
[    9.582430]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.582433]     (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[    9.582436]     (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[   10.093489] ata1.00: limited to UDMA/33 due to 40-wire cable
[   10.093493] ata1.00: FORCE: xfer_mask set to udma44
[   10.093496] ata1.01: limited to UDMA/33 due to 40-wire cable
[   10.093498] ata1.01: FORCE: xfer_mask set to udma44
[   10.106810] ata1.00: configured for UDMA/44
[   10.120142] ata1.01: configured for UDMA/44
[   10.120146] ata1: EH complete
[   10.457300] Adding 1056764k swap on /dev/md0.  Priority:1 extents:1 across:1056764k 
[   10.475406] EXT4-fs (md1): re-mounted. Opts: (null)
[   10.583419] EXT4-fs (md1): re-mounted. Opts: nobarrier,discard,delalloc,errors=remount-ro
[   10.808917] Non-volatile memory driver v1.3
[   10.929580] usbcore: registered new interface driver usbfs
[   10.930369] usbcore: registered new interface driver hub
[   10.930784] usbcore: registered new device driver usb
[   10.934108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.934169] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   10.934202] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   10.934211] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   10.934254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[   10.934309] ehci_hcd 0000:00:1d.7: debug port 1
[   10.938213] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[   10.938281] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe02ffc00
[   10.950040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   10.950084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.950093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.950100] usb usb1: Product: EHCI Host Controller
[   10.950107] usb usb1: Manufacturer: Linux 3.0.15-rt31-r235 ehci_hcd
[   10.950113] usb usb1: SerialNumber: 0000:00:1d.7
[   10.951365] hub 1-0:1.0: USB hub found
[   10.951379] hub 1-0:1.0: 6 ports detected
[   10.963027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.963059] ohci_hcd 0000:03:00.0: enabling device (0000 -> 0002)
[   10.963068] ohci_hcd 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   10.963086] ohci_hcd 0000:03:00.0: setting latency timer to 64
[   10.963090] ohci_hcd 0000:03:00.0: OHCI Host Controller
[   10.963102] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[   10.963778] ohci_hcd 0000:03:00.0: irq 20, io mem 0x90000000
[   11.018773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   11.018783] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.018790] usb usb2: Product: OHCI Host Controller
[   11.018797] usb usb2: Manufacturer: Linux 3.0.15-rt31-r235 ohci_hcd
[   11.018804] usb usb2: SerialNumber: 0000:03:00.0
[   11.020246] hub 2-0:1.0: USB hub found
[   11.020267] hub 2-0:1.0: 1 port detected
[   11.031858] uhci_hcd: USB Universal Host Controller Interface driver
[   11.031916] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.031926] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   11.031930] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   11.031942] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   11.033431] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
[   11.033471] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   11.033474] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.033477] usb usb3: Product: UHCI Host Controller
[   11.033479] usb usb3: Manufacturer: Linux 3.0.15-rt31-r235 uhci_hcd
[   11.033481] usb usb3: SerialNumber: 0000:00:1d.0
[   11.033998] hub 3-0:1.0: USB hub found
[   11.034003] hub 3-0:1.0: 2 ports detected
[   11.034121] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   11.034128] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   11.034131] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.034143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   11.036698] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[   11.036726] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   11.036729] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.036732] usb usb4: Product: UHCI Host Controller
[   11.036734] usb usb4: Manufacturer: Linux 3.0.15-rt31-r235 uhci_hcd
[   11.036736] usb usb4: SerialNumber: 0000:00:1d.1
[   11.037142] hub 4-0:1.0: USB hub found
[   11.037147] hub 4-0:1.0: 2 ports detected
[   11.037263] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.037269] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   11.037272] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   11.037280] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   11.039562] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[   11.039600] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[   11.039603] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.039605] usb usb5: Product: UHCI Host Controller
[   11.039607] usb usb5: Manufacturer: Linux 3.0.15-rt31-r235 uhci_hcd
[   11.039610] usb usb5: SerialNumber: 0000:00:1d.2
[   11.039788] hub 5-0:1.0: USB hub found
[   11.039793] hub 5-0:1.0: 2 ports detected
[   11.054908] usbcore: registered new interface driver usbhid
[   11.054910] usbhid: USB HID core driver
[   11.063597] usbcore: registered new interface driver libusual
[   11.066275] Initializing USB Mass Storage driver...
[   11.066432] usbcore: registered new interface driver usb-storage
[   11.066434] USB Mass Storage support registered.
[   11.073287] usbcore: registered new interface driver usbmouse
[   11.073289] usbmouse: v1.6:USB HID Boot Protocol mouse driver
[   11.081926] usbcore: registered new interface driver cdc_acm
[   11.081929] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   11.099562] TCP hybla registered
[   11.131822] firewire_ohci 0000:02:05.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   11.193373] firewire_ohci: Added fw-ohci device 0000:02:05.1, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1
[   11.430015] usb 2-1: new full speed USB device number 2 using ohci_hcd
[   11.626490] usb 2-1: New USB device found, idVendor=0af0, idProduct=7011
[   11.626494] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[   11.626497] usb 2-1: Product: Globetrotter HSUPA Modem  
[   11.626499] usb 2-1: Manufacturer: Option N.V.
[   11.626501] usb 2-1: SerialNumber: Serial Number
[   11.651434] hso: drivers/net/usb/hso.c: Option Wireless
[   11.653541] usbcore: registered new interface driver hso
[   11.693563] firewire_core: created device fw0: GUID 00012f6500038b32, S400
[   11.785493] device fsid 60cc1d70-42bc-490f-84b2-46c96a040f07 devid 1 transid 234382 /dev/sdc1
[   11.789111] btrfs: use spread ssd allocation scheme
[   11.789118] btrfs: force zlib compression
[   11.789122] btrfs: turning off barriers
[   11.789125] btrfs: setting nodatacow
[   12.514623] TCP cubic registered
[   12.906530] fuse init (API version 7.16)
[   13.213581] firewire_net: firewire0: IPv4 over FireWire on device 00012f6500038b32
[   13.213594] firewire_core: refreshed device fw0
[   13.308859] microcode: CPU0 sig=0x6d6, pf=0x20, revision=0x17
[   13.327364] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.405068] microcode: CPU0 updated to revision 0x18, date = 2004-10-17
[   14.033427] pktcdvd: writer pktcdvd0 mapped to sr0
[   15.792682] NET: Registered protocol family 10
[   15.911070] sshd (1760): /proc/1760/oom_adj is deprecated, please use /proc/1760/oom_score_adj instead.
[   17.781377] serio_raw: raw access enabled on isa0060/serio2 (serio_raw0, minor 57)
[   17.907821] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.916246] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.905418] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.231641] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.079824] wlan0: authenticate with 00:15:6d:84:69:14 (try 1)
[   35.082198] wlan0: authenticated
[   35.082223] wlan0: associate with 00:15:6d:84:69:14 (try 1)
[   35.086392] wlan0: RX AssocResp from 00:15:6d:84:69:14 (capab=0x431 status=0 aid=1)
[   35.086396] wlan0: associated
[   35.093739] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.094173] Calling CRDA for country: US
[   35.100295] Regulatory domain changed to country: US
[   35.100299]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   35.100304]     (2402000 KHz - 2494000 KHz @ 40000 KHz), (500 mBi, 3500 mBm)
[   35.100308]     (4910000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3500 mBm)
[   45.936683] wlan0: no IPv6 routers present
[   54.783377] usb 5-2: new low speed USB device number 2 using uhci_hcd
[   54.954004] usb 5-2: New USB device found, idVendor=046d, idProduct=c03e
[   54.954014] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   54.954022] usb 5-2: Product: USB-PS/2 Optical Mouse
[   54.954028] usb 5-2: Manufacturer: Logitech
[   54.974793] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input8
[   54.975524] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 1136.137385] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 1136.170306] ohci_hcd 0000:03:00.0: HC died; cleaning up
[ 1136.170323] ohci_hcd 0000:03:00.0: remove, state 0
[ 1136.170338] usb usb2: USB disconnect, device number 1
[ 1136.170345] usb 2-1: USB disconnect, device number 2
[ 1136.183646] ohci_hcd 0000:03:00.0: USB bus 2 deregistered
[ 1136.183677] ohci_hcd 0000:03:00.0: PCI INT A disabled
[ 1682.949860] sched: RT throttling activated
[ 5527.249517] usb 5-2: USB disconnect, device number 2
[ 6031.752779] usb 5-2: new low speed USB device number 3 using uhci_hcd
[ 6031.923780] usb 5-2: New USB device found, idVendor=046d, idProduct=c03e
[ 6031.923790] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6031.923798] usb 5-2: Product: USB-PS/2 Optical Mouse
[ 6031.923804] usb 5-2: Manufacturer: Logitech
[ 6031.951329] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input9
[ 6031.952064] generic-usb 0003:046D:C03E.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[10462.499029] usb 5-2: USB disconnect, device number 3
[12344.655481] usb 5-2: new low speed USB device number 4 using uhci_hcd
[12344.823072] usb 5-2: New USB device found, idVendor=046d, idProduct=c03e
[12344.823076] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[12344.823078] usb 5-2: Product: USB-PS/2 Optical Mouse
[12344.823081] usb 5-2: Manufacturer: Logitech
[12344.840409] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/input/input10
[12344.840720] generic-usb 0003:046D:C03E.0003: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[22690.747801] usb 5-2: USB disconnect, device number 4
[23740.477682] BUG: scheduling while atomic: irq/9-acpi/23/0x00000002
[23740.477689] Modules linked in: cpufreq_conservative aes_i586 aes_generic xt_TCPMSS xt_tcpudp iptable_mangle ip_tables x_tables ipv6 pci_slot pktcdvd microcode fuse tcp_cubic hso firewire_net firewire_ohci firewire_core crc_itu_t tcp_hybla cdc_acm usbmouse usb_storage usb_libusual usbhid uhci_hcd ohci_hcd ehci_hcd usbcore snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device cpufreq_userspace acpi_cpufreq mperf msr cpuid nvram arc4 pata_pcmcia joydev mousedev snd_intel8x0m 8250_pci 8250_pnp ath9k mac80211 ath9k_common ath9k_hw ath snd_intel8x0 snd_ac97_codec cfg80211 ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ac battery radeon psmouse pcmcia rfkill serio_raw ttm drm_kms_helper drm backlight i2c_algo_bit i2c_core cfbcopyarea cfbimgblt cfbfillrect power_supply pcspkr evdev snd_timer snd_page_alloc processor intel_agp intel_gtt agpgart button yenta_socket pcmcia_rsrc pcmcia_core 8250 serial_core raid0 btrfs crc32c libcrc32c thermal thermal_sys sr_mod 8139too hwmon cdrom atkbd [last unloaded: scsi_wait_scan]
[23740.477847] Pid: 23, comm: irq/9-acpi Not tainted 3.0.15-rt31-r235 #1
[23740.477853] Call Trace:
[23740.477862]  [<792d791d>] ? 0x792d791d
[23740.477868]  [<79022284>] ? 0x79022284
[23740.477874]  [<79020547>] ? 0x79020547
[23740.477879]  [<7902253e>] ? 0x7902253e
[23740.477885]  [<79022e59>] ? 0x79022e59
[23740.477891]  [<792d7b1f>] ? 0x792d7b1f
[23740.477896]  [<792d8b25>] ? 0x792d8b25
[23740.477902]  [<79020bfc>] ? 0x79020bfc
[23740.477908]  [<7918d6ec>] ? 0x7918d6ec
[23740.477913]  [<79196fe9>] ? 0x79196fe9
[23740.477919]  [<7919e454>] ? 0x7919e454
[23740.477924]  [<7919728b>] ? 0x7919728b
[23740.477930]  [<79195d13>] ? 0x79195d13
[23740.477935]  [<79188d97>] ? 0x79188d97
[23740.477940]  [<7905db90>] ? 0x7905db90
[23740.477946]  [<7905da0d>] ? 0x7905da0d
[23740.477951]  [<7905db70>] ? 0x7905db70
[23740.477957]  [<7905d8f0>] ? 0x7905d8f0
[23740.477962]  [<7903ec14>] ? 0x7903ec14
[23740.477968]  [<7903eba0>] ? 0x7903eba0
[23740.477973]  [<792d9f3e>] ? 0x792d9f3e
[53905.081331] BUG: scheduling while atomic: irq/9-acpi/23/0x00000002
[53905.081338] Modules linked in: cpufreq_conservative aes_i586 aes_generic xt_TCPMSS xt_tcpudp iptable_mangle ip_tables x_tables ipv6 pci_slot pktcdvd microcode fuse tcp_cubic hso firewire_net firewire_ohci firewire_core crc_itu_t tcp_hybla cdc_acm usbmouse usb_storage usb_libusual usbhid uhci_hcd ohci_hcd ehci_hcd usbcore snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device cpufreq_userspace acpi_cpufreq mperf msr cpuid nvram arc4 pata_pcmcia joydev mousedev snd_intel8x0m 8250_pci 8250_pnp ath9k mac80211 ath9k_common ath9k_hw ath snd_intel8x0 snd_ac97_codec cfg80211 ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ac battery radeon psmouse pcmcia rfkill serio_raw ttm drm_kms_helper drm backlight i2c_algo_bit i2c_core cfbcopyarea cfbimgblt cfbfillrect power_supply pcspkr evdev snd_timer snd_page_alloc processor intel_agp intel_gtt agpgart button yenta_socket pcmcia_rsrc pcmcia_core 8250 serial_core raid0 btrfs crc32c libcrc32c thermal thermal_sys sr_mod 8139too hwmon cdrom atkbd [last unloaded: scsi_wait_scan]
[53905.081495] Pid: 23, comm: irq/9-acpi Not tainted 3.0.15-rt31-r235 #1
[53905.081501] Call Trace:
[53905.081510]  [<792d791d>] ? 0x792d791d
[53905.081516]  [<79022284>] ? 0x79022284
[53905.081521]  [<79020547>] ? 0x79020547
[53905.081526]  [<7902253e>] ? 0x7902253e
[53905.081532]  [<79022e59>] ? 0x79022e59
[53905.081538]  [<792d7b1f>] ? 0x792d7b1f
[53905.081543]  [<792d8b25>] ? 0x792d8b25
[53905.081550]  [<79020bfc>] ? 0x79020bfc
[53905.081555]  [<7918d6ec>] ? 0x7918d6ec
[53905.081560]  [<79196fe9>] ? 0x79196fe9
[53905.081566]  [<7919e454>] ? 0x7919e454
[53905.081571]  [<7919728b>] ? 0x7919728b
[53905.081577]  [<79195d13>] ? 0x79195d13
[53905.081582]  [<79188d97>] ? 0x79188d97
[53905.081587]  [<7905db90>] ? 0x7905db90
[53905.081592]  [<7905da0d>] ? 0x7905da0d
[53905.081598]  [<7905db70>] ? 0x7905db70
[53905.081603]  [<7905d8f0>] ? 0x7905d8f0
[53905.081608]  [<7903ec14>] ? 0x7903ec14
[53905.081614]  [<7903eba0>] ? 0x7903eba0
[53905.081619]  [<792d9f3e>] ? 0x792d9f3e
[57615.750962] BUG: scheduling while atomic: irq/9-acpi/23/0x00000002
[57615.750968] Modules linked in: cpufreq_conservative aes_i586 aes_generic xt_TCPMSS xt_tcpudp iptable_mangle ip_tables x_tables ipv6 pci_slot pktcdvd microcode fuse tcp_cubic hso firewire_net firewire_ohci firewire_core crc_itu_t tcp_hybla cdc_acm usbmouse usb_storage usb_libusual usbhid uhci_hcd ohci_hcd ehci_hcd usbcore snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device cpufreq_userspace acpi_cpufreq mperf msr cpuid nvram arc4 pata_pcmcia joydev mousedev snd_intel8x0m 8250_pci 8250_pnp ath9k mac80211 ath9k_common ath9k_hw ath snd_intel8x0 snd_ac97_codec cfg80211 ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm ac battery radeon psmouse pcmcia rfkill serio_raw ttm drm_kms_helper drm backlight i2c_algo_bit i2c_core cfbcopyarea cfbimgblt cfbfillrect power_supply pcspkr evdev snd_timer snd_page_alloc processor intel_agp intel_gtt agpgart button yenta_socket pcmcia_rsrc pcmcia_core 8250 serial_core raid0 btrfs crc32c libcrc32c thermal thermal_sys sr_mod 8139too hwmon cdrom atkbd [last unloaded: scsi_wait_scan]
[57615.751126] Pid: 23, comm: irq/9-acpi Not tainted 3.0.15-rt31-r235 #1
[57615.751132] Call Trace:
[57615.751141]  [<792d791d>] ? 0x792d791d
[57615.751147]  [<79022284>] ? 0x79022284
[57615.751152]  [<79020547>] ? 0x79020547
[57615.751158]  [<7902253e>] ? 0x7902253e
[57615.751163]  [<79022e59>] ? 0x79022e59
[57615.751169]  [<792d7b1f>] ? 0x792d7b1f
[57615.751174]  [<792d8b25>] ? 0x792d8b25
[57615.751181]  [<79020bfc>] ? 0x79020bfc
[57615.751187]  [<7918d6ec>] ? 0x7918d6ec
[57615.751192]  [<79196fe9>] ? 0x79196fe9
[57615.751197]  [<7919e454>] ? 0x7919e454
[57615.751202]  [<7919728b>] ? 0x7919728b
[57615.751208]  [<79195d13>] ? 0x79195d13
[57615.751214]  [<79188d97>] ? 0x79188d97
[57615.751219]  [<7905db90>] ? 0x7905db90
[57615.751224]  [<7905da0d>] ? 0x7905da0d
[57615.751229]  [<7905db70>] ? 0x7905db70
[57615.751235]  [<7905d8f0>] ? 0x7905d8f0
[57615.751240]  [<7903ec14>] ? 0x7903ec14
[57615.751246]  [<7903eba0>] ? 0x7903eba0
[57615.751251]  [<792d9f3e>] ? 0x792d9f3e

  parent reply	other threads:[~2012-01-04 15:19 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-22  3:40 Steven Rostedt
2011-12-22 11:08 ` Raz
2011-12-22 11:50   ` Steven Rostedt
2011-12-22 14:00 ` Georgiewskiy Yuriy
2011-12-22 14:44   ` Steven Rostedt
2011-12-22 15:29     ` Georgiewskiy Yuriy
2011-12-22 16:23       ` Steven Rostedt
2011-12-22 16:35         ` Georgiewskiy Yuriy
2011-12-24  0:02           ` Karsten Wiese
2011-12-24 14:13             ` Steven Rostedt
2011-12-24 16:16               ` Clark Williams
2012-01-10 18:53             ` Steven Rostedt
2012-01-10 23:56               ` Karsten Wiese
2012-01-04 15:19         ` Georgiewskiy Yuriy [this message]
2012-01-11 11:10 ` Karsten Wiese
2012-01-11 15:39   ` Steven Rostedt
2012-01-12 10:18 ` Tim Sander
2012-01-12 13:54   ` Steven Rostedt
2012-01-12 16:57     ` Tim Sander
2012-01-13  9:42       ` Tim Sander
2012-01-13 18:45         ` Bernardo Barros
2012-01-13 20:30           ` Tim Sander
2012-01-13 23:51           ` Steven Rostedt
2012-01-17 14:27         ` [ANNOUNCE] 3.0.14-rt31 - ksoftirq running wild - FEC ethernet driver to blame? Tim Sander
2012-01-17 14:42           ` Steven Rostedt
2012-01-17 17:40           ` Mike Galbraith
2012-01-18 11:11             ` [ANNOUNCE] 3.0.14-rt31 - ksoftirq running wild - FEC ethernet driver to blame? Yep Tim Sander
2012-01-18 13:54               ` Mike Galbraith
2012-01-18 15:37                 ` Steven Rostedt
2012-01-24 10:52               ` Tim Sander
2012-01-25  9:31                 ` Tim Sander
2012-02-01 20:27                   ` Steven Rostedt
2012-02-01 23:11                     ` Tim Sander

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.02.1201041918280.7983@icf.org.ru \
    --to=bottleman@icf.org.ru \
    --cc=jkacur@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=williams@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®