mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
To: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>,
	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
	Ian Campbell <Ian.Campbell@citrix.com>,
	"Tim (Xen.org)" <tim@xen.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"linaro-dev@lists.linaro.org" <linaro-dev@lists.linaro.org>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"arnd@arndb.de" <arnd@arndb.de>
Subject: Re: [PATCH v2 10/23] xen/arm: compile and run xenbus
Date: Wed, 8 Aug 2012 18:42:05 +0100	[thread overview]
Message-ID: <alpine.DEB.2.02.1208081836050.21096@kaball.uk.xensource.com> (raw)
In-Reply-To: <5022A303.709@tycho.nsa.gov>

On Wed, 8 Aug 2012, Daniel De Graaf wrote:
> On 08/08/2012 01:19 PM, Stefano Stabellini wrote:
> > On Wed, 8 Aug 2012, Daniel De Graaf wrote:
> >> On 08/08/2012 12:51 PM, Stefano Stabellini wrote:
> >>> On Tue, 7 Aug 2012, Daniel De Graaf wrote:
> >>>> On 08/07/2012 02:21 PM, Konrad Rzeszutek Wilk wrote:
> >>>>> On Mon, Aug 06, 2012 at 03:27:13PM +0100, Stefano Stabellini wrote:
> >>>>>> bind_evtchn_to_irqhandler can legitimately return 0 (irq 0): it is not
> >>>>>> an error.
> >>>>>>
> >>>>>> If Linux is running as an HVM domain and is running as Dom0, use
> >>>>>> xenstored_local_init to initialize the xenstore page and event channel.
> >>>>>>
> >>>>>> Changes in v2:
> >>>>>>
> >>>>>> - refactor xenbus_init.
> >>>>>
> >>>>> Thank you. Lets also CC our friend at NSA who has been doing some work
> >>>>> in that area. Daniel are you OK with this change - will it still make
> >>>>> PV initial domain with with the MiniOS XenBus driver?
> >>>>>
> >>>>> Thanks.
> >>>>
> >>>> That case will work, but what this will break is launching the initial domain
> >>>> with a Xenstore stub domain already running (see below).
> >>>>
> >>>>>>
> >>>>>> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
> >>>>>> ---
> >>>>>>  drivers/xen/xenbus/xenbus_comms.c |    2 +-
> >>>>>>  drivers/xen/xenbus/xenbus_probe.c |   62 +++++++++++++++++++++++++-----------
> >>>>>>  drivers/xen/xenbus/xenbus_xs.c    |    1 +
> >>>>>>  3 files changed, 45 insertions(+), 20 deletions(-)
> >>>>>>
> >>>>>> diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c
> >>>>>> index 52fe7ad..c5aa55c 100644
> >>>>>> --- a/drivers/xen/xenbus/xenbus_comms.c
> >>>>>> +++ b/drivers/xen/xenbus/xenbus_comms.c
> >>>>>> @@ -224,7 +224,7 @@ int xb_init_comms(void)
> >>>>>>  		int err;
> >>>>>>  		err = bind_evtchn_to_irqhandler(xen_store_evtchn, wake_waiting,
> >>>>>>  						0, "xenbus", &xb_waitq);
> >>>>>> -		if (err <= 0) {
> >>>>>> +		if (err < 0) {
> >>>>>>  			printk(KERN_ERR "XENBUS request irq failed %i\n", err);
> >>>>>>  			return err;
> >>>>>>  		}
> >>>>>
> >>>>>> diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
> >>>>>> index b793723..a67ccc0 100644
> >>>>>> --- a/drivers/xen/xenbus/xenbus_probe.c
> >>>>>> +++ b/drivers/xen/xenbus/xenbus_probe.c
> >>>>>> @@ -719,37 +719,61 @@ static int __init xenstored_local_init(void)
> >>>>>>  	return err;
> >>>>>>  }
> >>>>>>  
> >>>>>> +enum xenstore_init {
> >>>>>> +	UNKNOWN,
> >>>>>> +	PV,
> >>>>>> +	HVM,
> >>>>>> +	LOCAL,
> >>>>>> +};
> >>>>>>  static int __init xenbus_init(void)
> >>>>>>  {
> >>>>>>  	int err = 0;
> >>>>>> +	enum xenstore_init usage = UNKNOWN;
> >>>>>> +	uint64_t v = 0;
> >>>>>>  
> >>>>>>  	if (!xen_domain())
> >>>>>>  		return -ENODEV;
> >>>>>>  
> >>>>>>  	xenbus_ring_ops_init();
> >>>>>>  
> >>>>>> -	if (xen_hvm_domain()) {
> >>>>>> -		uint64_t v = 0;
> >>>>>> -		err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v);
> >>>>>> -		if (err)
> >>>>>> -			goto out_error;
> >>>>>> -		xen_store_evtchn = (int)v;
> >>>>>> -		err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v);
> >>>>>> -		if (err)
> >>>>>> -			goto out_error;
> >>>>>> -		xen_store_mfn = (unsigned long)v;
> >>>>>> -		xen_store_interface = ioremap(xen_store_mfn << PAGE_SHIFT, PAGE_SIZE);
> >>>>>> -	} else {
> >>>>>> -		xen_store_evtchn = xen_start_info->store_evtchn;
> >>>>>> -		xen_store_mfn = xen_start_info->store_mfn;
> >>>>>> -		if (xen_store_evtchn)
> >>>>>> -			xenstored_ready = 1;
> >>>>>> -		else {
> >>>>>> +	if (xen_pv_domain())
> >>>>>> +		usage = PV;
> >>>>>> +	if (xen_hvm_domain())
> >>>>>> +		usage = HVM;
> >>>>
> >>>> The above is correct for domUs, and is overridden for dom0s:
> >>>>
> >>>>>> +	if (xen_hvm_domain() && xen_initial_domain())
> >>>>>> +		usage = LOCAL;
> >>>>>> +	if (xen_pv_domain() && !xen_start_info->store_evtchn)
> >>>>>> +		usage = LOCAL;
> >>>>
> >>>> Instead of these checks, I think it should just be:
> >>>>
> >>>> if (!xen_start_info->store_evtchn)
> >>>> 	usage = LOCAL;
> >>>>
> >>>> Any domain started after xenstore will have store_evtchn set, so if you don't
> >>>> have this set, you are either going to be running xenstore locally, or will
> >>>> use the ioctl to change it later (and so should still set up everything as if
> >>>> it will be running locally).
> >>>
> >>> That would be wrong for an HVM dom0 domain (at least on ARM), because
> >>> we don't have a start_info page at all.
> >>>
> >>>
> >>>>>> +	if (xen_pv_domain() && xen_start_info->store_evtchn)
> >>>>>> +		xenstored_ready = 1;
> >>>>
> >>>> This part can now just be moved unconditionally into case PV.
> >>>
> >>> What about:
> >>>
> >>> if (xen_pv_domain())
> >>>     usage = PV;
> >>> if (xen_hvm_domain())
> >>>     usage = HVM;
> >>> if (!xen_store_evtchn)
> >>>     usage = LOCAL;
> >>>
> >>> and moving xenstored_ready in case PV, like you suggested.
> >>>
> >>
> >> That looks correct, but you'd need to split up the switch statement in
> >> order to populate xen_store_evtchn before that last condition, which
> >> ends up pretty much eliminating the usage variable.
> > 
> > Going back to what you wrote in the previous email, in what way this
> > patch breaks the case when an initial domain is started after a Xenstore
> > stub domain?
> > 
> > Assuming that we are talking about a PV initial domain on x86, the
> > following check
> > 
> > if (xen_pv_domain() && !xen_start_info->store_evtchn)
> >     usage = LOCAL;
> > 
> > will return false (because store_evtchn is set), therefore usage will
> > remain set to PV.
> > And the check:
> > 
> > if (xen_pv_domain() && xen_start_info->store_evtchn)
> > 	xenstored_ready = 1;
> > 
> > will return true so xenstored_ready is going to be set to 1.
> > 
> 
> Right, the original patch didn't break anything with PV domains. The case
> it doesn't handle is an HVM initial domain with an already-running
> Xenstore domain; I think this applies both to ARM and hybrid/PVH on x86.
> In that case, usage would be set to LOCAL instead of HVM.


Right, however if I am not mistaken there is no such thing as an HVM
dom0 right now on x86 and hybrid/PVH is probably going to return true on
xen_pv_domain() and false on xen_hvm_domain().

In the ARM case, given that we don't have a start_info page, we would
need another way to figure out whether a xenstore stub domain is already
running, so I think we can just postpone the solution of that problem
for now.

  reply	other threads:[~2012-08-08 17:42 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-06 14:25 [PATCH v2 00/23] Introduce Xen support on ARM Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 01/23] arm: initial Xen support Stefano Stabellini
2012-08-07 18:10   ` Konrad Rzeszutek Wilk
2012-08-08 16:31     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 02/23] xen/arm: hypercalls Stefano Stabellini
2012-08-08 12:41   ` Dave Martin
2012-08-09 15:37     ` Stefano Stabellini
2012-08-09 16:50       ` Dave Martin
2012-08-06 14:27 ` [PATCH v2 03/23] xen/arm: page.h definitions Stefano Stabellini
2012-08-07 18:13   ` Konrad Rzeszutek Wilk
2012-08-08 16:33     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 04/23] xen/arm: sync_bitops Stefano Stabellini
2012-08-07 18:13   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 05/23] xen/arm: empty implementation of grant_table arch specific functions Stefano Stabellini
2012-08-07 18:13   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 06/23] xen: missing includes Stefano Stabellini
2012-08-07 18:14   ` Konrad Rzeszutek Wilk
2012-08-08 16:38     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 07/23] xen/arm: Xen detection and shared_info page mapping Stefano Stabellini
2012-08-06 16:23   ` [Xen-devel] " David Vrabel
2012-08-08 16:24     ` Stefano Stabellini
2012-08-07 18:17   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 08/23] xen/arm: Introduce xen_pfn_t for pfn and mfn types Stefano Stabellini
2012-08-07 18:18   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 09/23] xen/arm: Introduce xen_ulong_t for unsigned long Stefano Stabellini
2012-08-07 18:18   ` Konrad Rzeszutek Wilk
2012-08-08 16:42     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 10/23] xen/arm: compile and run xenbus Stefano Stabellini
2012-08-07 18:21   ` Konrad Rzeszutek Wilk
2012-08-07 18:44     ` Daniel De Graaf
2012-08-08 16:51       ` Stefano Stabellini
2012-08-08 17:01         ` Daniel De Graaf
2012-08-08 17:19           ` Stefano Stabellini
2012-08-08 17:33             ` Daniel De Graaf
2012-08-08 17:42               ` Stefano Stabellini [this message]
2012-08-09 16:54                 ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 11/23] xen: do not compile manage, balloon, pci, acpi and cpu_hotplug on ARM Stefano Stabellini
2012-08-07 18:23   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 12/23] xen/arm: introduce CONFIG_XEN " Stefano Stabellini
2012-08-07 18:23   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 13/23] xen/arm: get privilege status Stefano Stabellini
2012-08-07 18:24   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 14/23] xen/arm: initialize grant_table on ARM Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 15/23] xen/arm: receive Xen events " Stefano Stabellini
2012-08-07 18:30   ` Konrad Rzeszutek Wilk
2012-08-08 18:05     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 16/23] xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST Stefano Stabellini
2012-08-07 18:31   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 17/23] xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree Stefano Stabellini
2012-08-07 18:31   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 18/23] xen: allow privcmd for HVM guests Stefano Stabellini
2012-08-07 18:31   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 19/23] xen/arm: compile blkfront and blkback Stefano Stabellini
2012-08-07 18:32   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 20/23] xen/arm: compile netback Stefano Stabellini
2012-08-07 18:32   ` Konrad Rzeszutek Wilk
2012-08-06 14:27 ` [PATCH v2 21/23] xen: update xen_add_to_physmap interface Stefano Stabellini
2012-08-07 18:33   ` Konrad Rzeszutek Wilk
2012-08-08 17:22     ` Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 22/23] arm/v2m: initialize arch_timers even if v2m_timer is not present Stefano Stabellini
2012-08-06 14:27 ` [PATCH v2 23/23] [HACK] xen/arm: implement xen_remap_domain_mfn_range Stefano Stabellini
2012-08-07 18:39   ` Konrad Rzeszutek Wilk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.02.1208081836050.21096@kaball.uk.xensource.com \
    --to=stefano.stabellini@eu.citrix.com \
    --cc=Ian.Campbell@citrix.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=dgdegra@tycho.nsa.gov \
    --cc=konrad.wilk@oracle.com \
    --cc=linaro-dev@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tim@xen.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®