From: Manoj Iyer <manoj.iyer@canonical.com>
To: Andiry Xu <andiry@gmail.com>
Cc: Manoj Iyer <manoj.iyer@canonical.com>,
linux-kernel@vger.kernel.org, sarah.a.sharp@linux.intel.com,
gregkh@linuxfoundation.org, linux-usb@vger.kernel.org
Subject: Re: [PATCH 1/1] xhci: Unconditionally switch ports to xHCI on powerup
Date: Wed, 22 Aug 2012 11:09:51 -0500 (CDT) [thread overview]
Message-ID: <alpine.DEB.2.02.1208221108020.3981@lazy> (raw)
In-Reply-To: <CAOvWMLZz2RnWG77nrxs=HhR8QAqvX47i-a9JpbdmSqQEY2TWkQ@mail.gmail.com>
> If this is a must-to-do thing for Intel Panther Point platform, then
> we need to make sure it's called on power up and resume. Yes, I think
> moving the code below hc_init label should work and I think it's a
> better solution than your original patch.
Yes it effects a lot of machines (Lenovo), I will send out a new seperate
patch with the fix.
Thanks
Manoj
>
> Thanks,
> Andiry
>
>>
>> On Tue, 21 Aug 2012, Andiry Xu wrote:
>>
>>> On Tue, Aug 21, 2012 at 12:06 PM, <manoj.iyer@canonical.com> wrote:
>>>>
>>>> From: Manoj Iyer <manoj.iyer@canonical.com>
>>>>
>>>> USB 3.0 devices show up as high-speed devices on powerup, after an
>>>> s3 cycle they are correctly recognized as SuperSpeed. At powerup
>>>> unconditionally switch the port to xHCI like we do when we resume
>>>> from suspend.
>>>>
>>>> BugLink: http://bugs.launchpad.net/bugs/1000424
>>>>
>>>> Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
>>>> ---
>>>> drivers/usb/host/xhci-pci.c | 8 ++++++++
>>>> 1 file changed, 8 insertions(+)
>>>>
>>>> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
>>>> index 9bfd4ca11..5c8dbea 100644
>>>> --- a/drivers/usb/host/xhci-pci.c
>>>> +++ b/drivers/usb/host/xhci-pci.c
>>>> @@ -48,6 +48,14 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci,
>>>> struct pci_dev *pdev)
>>>> if (!pci_set_mwi(pdev))
>>>> xhci_dbg(xhci, "MWI active\n");
>>>>
>>>> + /*
>>>> + * USB SuperSpeed ports are recognized as HighSpeed ports on
>>>> powerup
>>>> + * unconditionally switch the ports to xHCI like we do when
>>>> resume
>>>> + * from suspend.
>>>> + */
>>>> + if (usb_is_intel_switchable_xhci(pdev))
>>>> + usb_enable_xhci_ports(pdev);
>>>> +
>>>
>>>
>>> Strange. This should have been called during system power up, in
>>> quirk_usb_handoff_xhci() of pci_quirks.c. Do you see that routine get
>>> called during power up?
>>>
>>> Thanks,
>>> Andiry
>>>
>>>> xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
>>>> return 0;
>>>> }
>>>> --
>>>> 1.7.9.5
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>>>> the body of a message to majordomo@vger.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>>
>> --
>> ====================
>> Manoj Iyer
>> Ubuntu/Canonical
>> Hardware Enablement
>> ====================
>
>
--
====================
Manoj Iyer
Ubuntu/Canonical
Hardware Enablement
====================
prev parent reply other threads:[~2012-08-22 16:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 4:06 [PATCH 0/1] " manoj.iyer
2012-08-21 4:06 ` [PATCH 1/1] " manoj.iyer
2012-08-21 11:21 ` Sergei Shtylyov
2012-08-21 12:12 ` Andiry Xu
2012-08-21 16:16 ` Manoj Iyer
2012-08-22 3:31 ` Andiry Xu
2012-08-22 16:09 ` Manoj Iyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1208221108020.3981@lazy \
--to=manoj.iyer@canonical.com \
--cc=andiry@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®