[PATCH] applesmc: Bump max wait and rearrange udelay

[Parag Warudkar <parag.lkml@gmail.com>]

I have been getting a steady stream of wait_read timeouts on my 2010 MBP.

After playing around with various values of APPLESMC_MAX_WAIT a value of 
0x10000 reduces the wait_read failures to zero under most normal workloads 
- with and without AC power plugged in, at idle and and at make -j4 loads.

While there I noticed we don't really need to udelay before first inb() - 
so I moved it down to after first and subsequent failures.

Been running this for couple days without any issues.

Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>

diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 2827088..46cb458 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -56,7 +56,7 @@
 /* wait up to 32 ms for a status change. */
 #define APPLESMC_MIN_WAIT	0x0010
 #define APPLESMC_RETRY_WAIT	0x0100
-#define APPLESMC_MAX_WAIT	0x8000
+#define APPLESMC_MAX_WAIT	0x10000
 
 #define APPLESMC_READ_CMD	0x10
 #define APPLESMC_WRITE_CMD	0x11
@@ -170,11 +170,11 @@ static int wait_read(void)
 	u8 status;
 	int us;
 	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
-		udelay(us);
 		status = inb(APPLESMC_CMD_PORT);
 		/* read: wait for smc to settle */
 		if (status & 0x01)
 			return 0;
+		udelay(us);
 	}
 
 	pr_warn("wait_read() fail: 0x%02x\n", status);
@@ -192,11 +192,12 @@ static int send_byte(u8 cmd, u16 port)
 
 	outb(cmd, port);
 	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
-		udelay(us);
 		status = inb(APPLESMC_CMD_PORT);
 		/* write: wait for smc to settle */
-		if (status & 0x02)
+		if (status & 0x02) {
+			udelay(us);
 			continue;
+		}
 		/* ready: cmd accepted, return */
 		if (status & 0x04)
 			return 0;