From: Julia Lawall <Julia.Lawall@lip6.fr>
To: walter harms <wharms@bfs.de>
Cc: Arnd Bergmann <arnd@arndb.de>,
kernel-janitors@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jason Wessel <jason.wessel@windriver.com>,
kgdb-bugreport@lists.sourceforge.net,
linux-kernel@vger.kernel.org
Subject: [PATCH] drivers/misc/kgdbts.c: remove eprintk
Date: Sat, 3 Nov 2012 15:26:59 +0100 (CET) [thread overview]
Message-ID: <alpine.DEB.2.02.1211031525500.1955@localhost6.localdomain6> (raw)
In-Reply-To: <509509F8.2010407@bfs.de>
From: Julia Lawall <Julia.Lawall@lip6.fr>
eprintk is really just WARN(1, KERN_ERR ...). Use WARN to be more
consistent with the rest of the code.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
---
drivers/misc/kgdbts.c | 38 +++++++++++++++++---------------------
1 file changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 3aa9a96..433993b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -113,10 +113,6 @@
printk(KERN_INFO a); \
touch_nmi_watchdog(); \
} while (0)
-#define eprintk(a...) do { \
- printk(KERN_ERR a); \
- WARN_ON(1); \
- } while (0)
#define MAX_CONFIG_LEN 40
static struct kgdb_io kgdbts_io_ops;
@@ -323,7 +319,7 @@ static int check_and_rewind_pc(char *put_str, char *arg)
v2printk("Emul: rewind hit single step bp\n");
restart_from_top_after_write = 1;
} else if (strcmp(arg, "silent") && ip + offset != addr) {
- eprintk("kgdbts: BP mismatch %lx expected %lx\n",
+ WARN(1, KERN_ERR "kgdbts: BP mismatch %lx expected %lx\n",
ip + offset, addr);
return 1;
}
@@ -374,7 +370,7 @@ static int check_single_step(char *put_str, char *arg)
continue_test:
matched_id = 0;
if (instruction_pointer(&kgdbts_regs) == addr) {
- eprintk("kgdbts: SingleStep failed at %lx\n",
+ WARN(1, KERN_ERR "kgdbts: SingleStep failed at %lx\n",
instruction_pointer(&kgdbts_regs));
return 1;
}
@@ -469,7 +465,7 @@ static void emul_sstep_get(char *arg)
break_helper("z0", NULL, sstep_addr);
break;
default:
- eprintk("kgdbts: ERROR failed sstep get emulation\n");
+ WARN(1, KERN_ERR "kgdbts: ERROR failed sstep get emulation\n");
}
sstep_state++;
}
@@ -496,13 +492,13 @@ static int emul_sstep_put(char *put_str, char *arg)
break;
case 2:
if (strncmp(put_str, "$OK", 3)) {
- eprintk("kgdbts: failed sstep break set\n");
+ WARN(1, KERN_ERR "kgdbts: failed sstep break set\n");
return 1;
}
break;
case 3:
if (strncmp(put_str, "$T0", 3)) {
- eprintk("kgdbts: failed continue sstep\n");
+ WARN(1, KERN_ERR "kgdbts: failed continue sstep\n");
return 1;
} else {
char *ptr = &put_str[11];
@@ -511,14 +507,14 @@ static int emul_sstep_put(char *put_str, char *arg)
break;
case 4:
if (strncmp(put_str, "$OK", 3)) {
- eprintk("kgdbts: failed sstep break unset\n");
+ WARN(1, KERN_ERR "kgdbts: failed sstep break unset\n");
return 1;
}
/* Single step is complete so continue on! */
sstep_state = 0;
return 0;
default:
- eprintk("kgdbts: ERROR failed sstep put emulation\n");
+ WARN(1, KERN_ERR "kgdbts: ERROR failed sstep put emulation\n");
}
/* Continue on the same test line until emulation is complete */
@@ -763,7 +759,7 @@ static int run_simple_test(int is_get_char, int chr)
}
if (get_buf[get_buf_cnt] == '\0') {
- eprintk("kgdbts: ERROR GET: EOB on '%s' at %i\n",
+ WARN(1, KERN_ERR "kgdbts: ERROR GET: EOB on '%s' at %i\n",
ts.name, ts.idx);
get_buf_cnt = 0;
fill_get_buf("D");
@@ -778,13 +774,13 @@ static int run_simple_test(int is_get_char, int chr)
*/
if (ts.tst[ts.idx].get[0] == '\0' && ts.tst[ts.idx].put[0] == '\0' &&
!ts.tst[ts.idx].get_handler) {
- eprintk("kgdbts: ERROR: beyond end of test on"
+ WARN(1, KERN_ERR "kgdbts: ERROR: beyond end of test on"
" '%s' line %i\n", ts.name, ts.idx);
return 0;
}
if (put_buf_cnt >= BUFMAX) {
- eprintk("kgdbts: ERROR: put buffer overflow on"
+ WARN(1, KERN_ERR "kgdbts: ERROR: put buffer overflow on"
" '%s' line %i\n", ts.name, ts.idx);
put_buf_cnt = 0;
return 0;
@@ -799,7 +795,7 @@ static int run_simple_test(int is_get_char, int chr)
/* End of packet == #XX so look for the '#' */
if (put_buf_cnt > 3 && put_buf[put_buf_cnt - 3] == '#') {
if (put_buf_cnt >= BUFMAX) {
- eprintk("kgdbts: ERROR: put buffer overflow on"
+ WARN(1, KERN_ERR "kgdbts: ERROR: put buffer overflow on"
" '%s' line %i\n", ts.name, ts.idx);
put_buf_cnt = 0;
return 0;
@@ -808,7 +804,7 @@ static int run_simple_test(int is_get_char, int chr)
v2printk("put%i: %s\n", ts.idx, put_buf);
/* Trigger check here */
if (ts.validate_put && ts.validate_put(put_buf)) {
- eprintk("kgdbts: ERROR PUT: end of test "
+ WARN(1, KERN_ERR "kgdbts: ERROR PUT: end of test "
"buffer on '%s' line %i expected %s got %s\n",
ts.name, ts.idx, ts.tst[ts.idx].put, put_buf);
}
@@ -872,7 +868,7 @@ static void run_breakpoint_test(int is_hw_breakpoint)
if (test_complete)
return;
- eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ WARN(1, KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
if (is_hw_breakpoint)
hwbreaks_ok = 0;
}
@@ -893,7 +889,7 @@ static void run_hw_break_test(int is_write_test)
hw_break_val_access();
if (is_write_test) {
if (test_complete == 2) {
- eprintk("kgdbts: ERROR %s broke on access\n",
+ WARN(1, KERN_ERR "kgdbts: ERROR %s broke on access\n",
ts.name);
hwbreaks_ok = 0;
}
@@ -904,7 +900,7 @@ static void run_hw_break_test(int is_write_test)
if (test_complete == 1)
return;
- eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ WARN(1, KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
hwbreaks_ok = 0;
}
@@ -922,12 +918,12 @@ static void run_nmi_sleep_test(int nmi_sleep)
touch_nmi_watchdog();
local_irq_restore(flags);
if (test_complete != 2)
- eprintk("kgdbts: ERROR nmi_test did not hit nmi\n");
+ WARN(1, KERN_ERR "kgdbts: ERROR nmi_test did not hit nmi\n");
kgdb_breakpoint();
if (test_complete == 1)
return;
- eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ WARN(1, KERN_ERR "kgdbts: ERROR %s test failed\n", ts.name);
}
static void run_bad_read_test(void)
next prev parent reply other threads:[~2012-11-03 14:27 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-03 10:58 [PATCH 0/16] use WARN Julia Lawall
2012-11-03 10:58 ` [PATCH 1/16] drivers/gpu/drm/drm_cache.c: use WARN_ONCE Julia Lawall
2012-11-03 10:58 ` [PATCH 2/16] fs/hfsplus/bnode.c: use WARN Julia Lawall
2012-11-04 11:49 ` Vyacheslav Dubeyko
2012-11-03 10:58 ` [PATCH 3/16] drivers/md/raid5.c: " Julia Lawall
2012-11-03 10:58 ` [PATCH 4/16] drivers/usb/wusbcore: " Julia Lawall
2012-11-03 10:58 ` [PATCH 5/16] drivers/scsi: " Julia Lawall
2012-11-03 10:58 ` [PATCH 6/16] drivers/infiniband/hw/cxgb4/cm.c: " Julia Lawall
2012-11-03 12:40 ` Steve Wise
2012-11-03 10:58 ` [PATCH 7/16] drivers/scsi/gdth.c: " Julia Lawall
2012-11-03 10:58 ` [PATCH 8/16] drivers/infiniband/hw/cxgb3/iwch_cm.c: " Julia Lawall
2012-11-03 12:39 ` Steve Wise
2012-11-03 10:58 ` [PATCH 9/16] fs/ext4/indirect.c: " Julia Lawall
2013-02-02 1:07 ` Theodore Ts'o
2012-11-03 10:58 ` [PATCH 10/16] drivers/net/ethernet/ibm/emac/mal.c: " Julia Lawall
2012-11-03 11:30 ` walter harms
2012-11-03 14:14 ` Julia Lawall
2012-11-03 16:26 ` walter harms
2012-11-03 16:35 ` Julia Lawall
2012-11-03 19:43 ` David Miller
2012-11-03 10:58 ` [PATCH 11/16] drivers/misc/kgdbts.c: " Julia Lawall
2012-11-03 12:11 ` walter harms
2012-11-03 14:26 ` Julia Lawall [this message]
2012-11-04 19:39 ` [PATCH] drivers/misc/kgdbts.c: remove eprintk Arnd Bergmann
2012-11-04 19:58 ` Julia Lawall
2012-11-04 20:51 ` Arnd Bergmann
2012-11-04 21:04 ` Julia Lawall
2012-11-05 16:26 ` Arnd Bergmann
2012-11-05 16:57 ` Julia Lawall
2012-11-05 20:01 ` Arnd Bergmann
2012-11-03 10:58 ` [PATCH 12/16] fs/logfs/gc.c: use WARN Julia Lawall
2012-11-03 10:58 ` [PATCH 13/16] fs/btrfs: " Julia Lawall
2012-11-05 15:38 ` David Sterba
2012-11-03 10:58 ` [PATCH 14/16] drivers/ssb/main.c: " Julia Lawall
2012-11-03 10:58 ` [PATCH 15/16] drivers/parisc/pdc_stable.c: " Julia Lawall
2012-11-03 10:58 ` [PATCH 16/16] drivers/infiniband/hw/nes: " Julia Lawall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1211031525500.1955@localhost6.localdomain6 \
--to=julia.lawall@lip6.fr \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=jason.wessel@windriver.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=kgdb-bugreport@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=wharms@bfs.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®