[PATCH] ALSA: at73c213: clk_round_rate() can return a zero upon error

[Paul Walmsley <pwalmsley@nvidia.com>]

Treat both negative and zero return values from clk_round_rate()
as errors.  This is needed since subsequent patches will convert
clk_round_rate()'s return value to be an unsigned type, rather
than a signed type, since some clock sources can generate rates higher 
than (2^31)-1 Hz.

Eventually, when calling clk_round_rate(), only a return value of
zero will be considered a error.  All other values will be
considered valid rates.  The comparison against values less than
0 is kept to preserve the correct behavior in the meantime.

Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
---
Applies on v3.13-rc3.  See also:

http://marc.info/?l=linux-arm-kernel&m=138542591313620&w=2

  sound/spi/at73c213.c |    2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 8e3d9a6c7a3b..25c38afaee49 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -174,7 +174,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
  		dac_rate_new = 8 * (ssc_rate / ssc_div);

  		status = clk_round_rate(chip->board->dac_clk, dac_rate_new);
-		if (status < 0)
+		if (status <= 0)
  			return status;

  		/* Ignore difference smaller than 256 Hz. */