From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>
Subject: [GIT Pull] timer fixes for 3.14
Date: Sat, 15 Feb 2014 20:21:39 +0100 (CET) [thread overview]
Message-ID: <alpine.DEB.2.02.1402152005210.21991@ionos.tec.linutronix.de> (raw)
Linus,
please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus
The following trilogy of patches brings you:
* Fix for a long standing math overflow issue with HZ < 60
* An onliner fix for a corner case in the dreaded tick broadcast
mechanism affecting a certain range of AMD machines which are
infested with the infamous automagic C1E power control misfeature
* A fix for one of the ARM platforms which allows the kernel to
proceed and boot instead of stupidly panicing for no good
reason. The patch is slightly larger than necessary, but it's less
ugly than the alternative 5 liner.
Thanks,
tglx
------------------>
Mikulas Patocka (1):
time: Fix overflow when HZ is smaller than 60
Thomas Gleixner (1):
tick: Clear broadcast pending bit when switching to oneshot
Tim Kryger (1):
clocksource: Kona: Print warning rather than panic
drivers/clocksource/bcm_kona_timer.c | 54 ++++++++++++++++++----------------
kernel/time/jiffies.c | 6 ++++
kernel/time/tick-broadcast.c | 1 +
3 files changed, 35 insertions(+), 26 deletions(-)
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index 974b2db..0595dc6 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -99,31 +99,6 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
return;
}
-static void __init kona_timers_init(struct device_node *node)
-{
- u32 freq;
- struct clk *external_clk;
-
- external_clk = of_clk_get_by_name(node, NULL);
-
- if (!IS_ERR(external_clk)) {
- arch_timer_rate = clk_get_rate(external_clk);
- clk_prepare_enable(external_clk);
- } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
- arch_timer_rate = freq;
- } else {
- panic("unable to determine clock-frequency");
- }
-
- /* Setup IRQ numbers */
- timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
- /* Setup IO addresses */
- timers.tmr_regs = of_iomap(node, 0);
-
- kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
@@ -198,7 +173,34 @@ static struct irqaction kona_timer_irq = {
static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init(node);
+ u32 freq;
+ struct clk *external_clk;
+
+ if (!of_device_is_available(node)) {
+ pr_info("Kona Timer v1 marked as disabled in device tree\n");
+ return;
+ }
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency");
+ return;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 7a925ba..a6a5bf5 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -51,7 +51,13 @@
* HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
+#if HZ < 34
+#define JIFFIES_SHIFT 6
+#elif HZ < 67
+#define JIFFIES_SHIFT 7
+#else
#define JIFFIES_SHIFT 8
+#endif
static cycle_t jiffies_read(struct clocksource *cs)
{
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 43780ab..98977a5 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -756,6 +756,7 @@ out:
static void tick_broadcast_clear_oneshot(int cpu)
{
cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
+ cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
}
static void tick_broadcast_init_next_event(struct cpumask *mask,
next reply other threads:[~2014-02-15 19:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-15 19:21 Thomas Gleixner [this message]
2014-02-18 2:59 ` Preeti Murthy
2014-02-18 18:40 ` Thomas Gleixner
2014-02-19 3:23 ` Preeti U Murthy
2014-02-23 0:02 Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1402152005210.21991@ionos.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®