From: Thomas Gleixner <tglx@linutronix.de>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>,
Kukjin Kim <kgene.kim@samsung.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Tomasz Figa <t.figa@samsung.com>,
stable@vger.kernel.org
Subject: Re: [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging
Date: Tue, 15 Apr 2014 17:20:04 +0200 (CEST) [thread overview]
Message-ID: <alpine.DEB.2.02.1404151711250.22697@ionos.tec.linutronix.de> (raw)
In-Reply-To: <1397566023.29169.31.camel@AMDC1943>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2438 bytes --]
On Tue, 15 Apr 2014, Krzysztof Kozlowski wrote:
> On wto, 2014-04-15 at 14:28 +0200, Daniel Lezcano wrote:
> > On 04/15/2014 11:34 AM, Krzysztof Kozlowski wrote:
> > > On pią, 2014-03-28 at 14:06 +0100, Krzysztof Kozlowski wrote:
> > >> Fix stall after hotplugging CPU1. Affected are SoCs where Multi Core Timer
> > >> interrupts are shared (SPI), e.g. Exynos 4210. The stall was a result of
> > >> starting the CPU1 local timer not in L1 timer but in L0 (which is used
> > >> by CPU0).
> > >
> > > Hi,
> > >
> > > Do you have any comments on these 3 patches? They fix the CPU stall on
> > > Exynos4210 and also on Exynos3250 (Chanwoo Choi sent patches for it
> > > recently).
> >
> > You describe this issue as impacting different SoC not only the exynos,
> > right ?
> >
> > Do you know what other SoCs are impacted by this ?
>
> No, affected are only Exynos SoC-s. It was confirmed on Exynos4210
> (Trats board) and Exynos3250 (new SoC, patches for it were recently
> posted by Chanwoo).
>
> Other Exynos SoC-s where MCT local timers use shared interrupts (SPI)
> can also be affected. Candidates are Exynos 5250 and 5420 but I haven't
> tested them.
>
> > I guess this issue is not reproducible just with the line below, we need
> > a timer to expire right at the moment CPU1 is hotplugged, right ?
>
> Right. The timer must fire in short time between enabling local timer
> for CPU1 and setting the affinity for IRQ.
Why do you set the affinity in the CPU_ONLINE hotplug callback and not
right away when the interrupt is requested?
Thanks,
tglx
Index: linux-2.6/drivers/clocksource/exynos_mct.c
===================================================================
--- linux-2.6.orig/drivers/clocksource/exynos_mct.c
+++ linux-2.6/drivers/clocksource/exynos_mct.c
@@ -430,6 +430,7 @@ static int exynos4_local_timer_setup(str
evt->irq);
return -EIO;
}
+ irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu));
} else {
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
}
@@ -461,12 +462,6 @@ static int exynos4_mct_cpu_notify(struct
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_setup(&mevt->evt);
break;
- case CPU_ONLINE:
- cpu = (unsigned long)hcpu;
- if (mct_int_type == MCT_INT_SPI)
- irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu],
- cpumask_of(cpu));
- break;
case CPU_DYING:
mevt = this_cpu_ptr(&percpu_mct_tick);
exynos4_local_timer_stop(&mevt->evt);
next prev parent reply other threads:[~2014-04-15 15:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-28 13:06 Krzysztof Kozlowski
2014-03-28 13:06 ` [PATCH 2/3] clocksource: exynos_mct: Change exynos4_mct_tick_clear return type to void Krzysztof Kozlowski
2014-03-28 13:06 ` [PATCH 3/3] clocksource: exynos_mct: Fix too early ISR fire up on wrong CPU Krzysztof Kozlowski
2014-04-15 9:34 ` [PATCH 1/3] clocksource: exynos_mct: Fix stall after CPU hotplugging Krzysztof Kozlowski
2014-04-15 12:28 ` Daniel Lezcano
2014-04-15 12:47 ` Krzysztof Kozlowski
2014-04-15 15:20 ` Thomas Gleixner [this message]
2014-04-15 15:41 ` Krzysztof Kozlowski
2014-04-15 16:20 ` Thomas Gleixner
2014-04-16 8:51 ` Krzysztof Kozlowski
2014-04-16 9:41 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1404151711250.22697@ionos.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=b.zolnierkie@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=stable@vger.kernel.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®