mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Julia Lawall <julia.lawall@lip6.fr>
To: Dan Williams <dan.j.williams@intel.com>
Cc: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
	axboe@kernel.dk, riel@redhat.com, linux-nvdimm@ml01.01.org,
	david@fromorbit.com, hch@lst.de, mgorman@suse.de,
	j.glisse@gmail.com, linux-fsdevel@vger.kernel.org,
	akpm@linux-foundation.org, mingo@kernel.org
Subject: Re: [PATCH v3 05/11] scatterlist: use sg_phys()
Date: Tue, 12 May 2015 07:24:57 +0200 (CEST)	[thread overview]
Message-ID: <alpine.DEB.2.02.1505120724230.2075@localhost6.localdomain6> (raw)
In-Reply-To: <20150512042956.11521.32457.stgit@dwillia2-desk3.amr.corp.intel.com>



On Tue, 12 May 2015, Dan Williams wrote:

> Coccinelle cleanup to replace open coded sg to physical address
> translations.  This is in preparation for introducing scatterlists that
> reference pfn(s) without a backing struct page.
> 
> // sg_phys.cocci: convert usage page_to_phys(sg_page(sg)) to sg_phys(sg)
> // usage: make coccicheck COCCI=sg_phys.cocci MODE=patch
> 
> virtual patch
> virtual report
> virtual org

Just for information, you don't need the three lines above.  There are ony 
useful when you want the semantic patch to support several kinds of 
output.

julia

> @@
> struct scatterlist *sg;
> @@
> 
> - page_to_phys(sg_page(sg)) + sg->offset
> + sg_phys(sg)
> 
> @@
> struct scatterlist *sg;
> @@
> 
> - page_to_phys(sg_page(sg))
> + sg_phys(sg) - sg->offset
> 
> Cc: Julia Lawall <Julia.Lawall@lip6.fr>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> ---
>  arch/arm/mm/dma-mapping.c                    |    2 +-
>  arch/microblaze/kernel/dma.c                 |    2 +-
>  drivers/iommu/intel-iommu.c                  |    4 ++--
>  drivers/iommu/iommu.c                        |    2 +-
>  drivers/staging/android/ion/ion_chunk_heap.c |    4 ++--
>  5 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
> index 09c5fe3d30c2..43cc6a8fdacc 100644
> --- a/arch/arm/mm/dma-mapping.c
> +++ b/arch/arm/mm/dma-mapping.c
> @@ -1502,7 +1502,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
>  		return -ENOMEM;
>  
>  	for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) {
> -		phys_addr_t phys = page_to_phys(sg_page(s));
> +		phys_addr_t phys = sg_phys(s) - s->offset;
>  		unsigned int len = PAGE_ALIGN(s->offset + s->length);
>  
>  		if (!is_coherent &&
> diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
> index ed7ba8a11822..dcb3c594d626 100644
> --- a/arch/microblaze/kernel/dma.c
> +++ b/arch/microblaze/kernel/dma.c
> @@ -61,7 +61,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
>  	/* FIXME this part of code is untested */
>  	for_each_sg(sgl, sg, nents, i) {
>  		sg->dma_address = sg_phys(sg);
> -		__dma_sync(page_to_phys(sg_page(sg)) + sg->offset,
> +		__dma_sync(sg_phys(sg),
>  							sg->length, direction);
>  	}
>  
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index 68d43beccb7e..9b9ada71e0d3 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -1998,7 +1998,7 @@ static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
>  			sg_res = aligned_nrpages(sg->offset, sg->length);
>  			sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
>  			sg->dma_length = sg->length;
> -			pteval = page_to_phys(sg_page(sg)) | prot;
> +			pteval = (sg_phys(sg) - sg->offset) | prot;
>  			phys_pfn = pteval >> VTD_PAGE_SHIFT;
>  		}
>  
> @@ -3302,7 +3302,7 @@ static int intel_nontranslate_map_sg(struct device *hddev,
>  
>  	for_each_sg(sglist, sg, nelems, i) {
>  		BUG_ON(!sg_page(sg));
> -		sg->dma_address = page_to_phys(sg_page(sg)) + sg->offset;
> +		sg->dma_address = sg_phys(sg);
>  		sg->dma_length = sg->length;
>  	}
>  	return nelems;
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index d4f527e56679..59808fc9110d 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1147,7 +1147,7 @@ size_t default_iommu_map_sg(struct iommu_domain *domain, unsigned long iova,
>  	min_pagesz = 1 << __ffs(domain->ops->pgsize_bitmap);
>  
>  	for_each_sg(sg, s, nents, i) {
> -		phys_addr_t phys = page_to_phys(sg_page(s)) + s->offset;
> +		phys_addr_t phys = sg_phys(s);
>  
>  		/*
>  		 * We are mapping on IOMMU page boundaries, so offset within
> diff --git a/drivers/staging/android/ion/ion_chunk_heap.c b/drivers/staging/android/ion/ion_chunk_heap.c
> index 3e6ec2ee6802..b7da5d142aa9 100644
> --- a/drivers/staging/android/ion/ion_chunk_heap.c
> +++ b/drivers/staging/android/ion/ion_chunk_heap.c
> @@ -81,7 +81,7 @@ static int ion_chunk_heap_allocate(struct ion_heap *heap,
>  err:
>  	sg = table->sgl;
>  	for (i -= 1; i >= 0; i--) {
> -		gen_pool_free(chunk_heap->pool, page_to_phys(sg_page(sg)),
> +		gen_pool_free(chunk_heap->pool, sg_phys(sg) - sg->offset,
>  			      sg->length);
>  		sg = sg_next(sg);
>  	}
> @@ -109,7 +109,7 @@ static void ion_chunk_heap_free(struct ion_buffer *buffer)
>  							DMA_BIDIRECTIONAL);
>  
>  	for_each_sg(table->sgl, sg, table->nents, i) {
> -		gen_pool_free(chunk_heap->pool, page_to_phys(sg_page(sg)),
> +		gen_pool_free(chunk_heap->pool, sg_phys(sg) - sg->offset,
>  			      sg->length);
>  	}
>  	chunk_heap->allocated -= allocated_size;
> 
> 

  reply	other threads:[~2015-05-12  5:25 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-12  4:29 [PATCH v3 00/11] evacuate struct page from the block layer, introduce __pfn_t Dan Williams
2015-05-12  4:29 ` [PATCH v3 01/11] arch: introduce __pfn_t for persistenti/device memory Dan Williams
2015-05-12  4:29 ` [PATCH v3 02/11] block: add helpers for accessing a bio_vec page Dan Williams
2015-05-12  4:29 ` [PATCH v3 03/11] block: convert .bv_page to .bv_pfn bio_vec Dan Williams
2015-05-12  4:29 ` [PATCH v3 04/11] dma-mapping: allow archs to optionally specify a ->map_pfn() operation Dan Williams
2015-05-12  4:29 ` [PATCH v3 05/11] scatterlist: use sg_phys() Dan Williams
2015-05-12  5:24   ` Julia Lawall [this message]
2015-05-12  5:44     ` Dan Williams
2015-05-12  4:30 ` [PATCH v3 06/11] scatterlist: support "page-less" (__pfn_t only) entries Dan Williams
2015-05-13 18:35   ` Williams, Dan J
2015-05-19  4:10     ` Vinod Koul
2015-05-20 16:03       ` Dan Williams
2015-05-23 14:12     ` hch
2015-05-23 16:41       ` Dan Williams
2015-05-12  4:30 ` [PATCH v3 07/11] x86: support dma_map_pfn() Dan Williams
2015-05-12  4:30 ` [PATCH v3 08/11] x86: support kmap_atomic_pfn_t() for persistent memory Dan Williams
2015-05-12  4:30 ` [PATCH v3 09/11] block: convert kmap helpers to kmap_atomic_pfn_t() Dan Williams
2015-05-12  4:30 ` [PATCH v3 10/11] dax: convert to __pfn_t Dan Williams
2015-05-12  4:30 ` [PATCH v3 11/11] block: base support for pfn i/o Dan Williams
2015-05-23 14:32 ` [PATCH v3 00/11] evacuate struct page from the block layer, introduce __pfn_t Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.02.1505120724230.2075@localhost6.localdomain6 \
    --to=julia.lawall@lip6.fr \
    --cc=akpm@linux-foundation.org \
    --cc=axboe@kernel.dk \
    --cc=dan.j.williams@intel.com \
    --cc=david@fromorbit.com \
    --cc=hch@lst.de \
    --cc=j.glisse@gmail.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@ml01.01.org \
    --cc=mgorman@suse.de \
    --cc=mingo@kernel.org \
    --cc=riel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®