mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Julia Lawall <julia.lawall@lip6.fr>
To: Shraddha Barke <shraddha.6596@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jonathan Cameron <jic23@kernel.org>,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Hartmut Knaack <knaack.h@gmx.de>,
	linux-kernel@vger.kernel.org, Julia Lawall <julia.lawall@lip6.fr>
Subject: Re: [PATCH 2/6] Staging: iio: cdc: ad7152.c: Prefer using the BIT macro
Date: Thu, 10 Sep 2015 08:01:04 +0200 (CEST)	[thread overview]
Message-ID: <alpine.DEB.2.02.1509100800511.2148@localhost6.localdomain6> (raw)
In-Reply-To: <1441858434-2846-2-git-send-email-shraddha.6596@gmail.com>

On Thu, 10 Sep 2015, Shraddha Barke wrote:

> This patch replaces bit shifting on 1 with the BIT(x) macro
> as it's extensively used by other function in this driver.

Don't use BIT in the mixed cases.

julia

> 
> This was done with coccinelle:
> @@ int g; @@
> 
> -(1 << g)
> +BIT(g)
> 
> Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
> ---
>  drivers/staging/iio/cdc/ad7152.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/staging/iio/cdc/ad7152.c b/drivers/staging/iio/cdc/ad7152.c
> index 87110d9..ba44c0e 100644
> --- a/drivers/staging/iio/cdc/ad7152.c
> +++ b/drivers/staging/iio/cdc/ad7152.c
> @@ -41,30 +41,30 @@
>  #define AD7152_REG_CFG2			26
>  
>  /* Status Register Bit Designations (AD7152_REG_STATUS) */
> -#define AD7152_STATUS_RDY1		(1 << 0)
> -#define AD7152_STATUS_RDY2		(1 << 1)
> -#define AD7152_STATUS_C1C2		(1 << 2)
> -#define AD7152_STATUS_PWDN		(1 << 7)
> +#define AD7152_STATUS_RDY1		BIT(0)
> +#define AD7152_STATUS_RDY2		BIT(1)
> +#define AD7152_STATUS_C1C2		BIT(2)
> +#define AD7152_STATUS_PWDN		BIT(7)
>  
>  /* Setup Register Bit Designations (AD7152_REG_CHx_SETUP) */
> -#define AD7152_SETUP_CAPDIFF		(1 << 5)
> +#define AD7152_SETUP_CAPDIFF		BIT(5)
>  #define AD7152_SETUP_RANGE_2pF		(0 << 6)
> -#define AD7152_SETUP_RANGE_0_5pF	(1 << 6)
> +#define AD7152_SETUP_RANGE_0_5pF	BIT(6)
>  #define AD7152_SETUP_RANGE_1pF		(2 << 6)
>  #define AD7152_SETUP_RANGE_4pF		(3 << 6)
>  #define AD7152_SETUP_RANGE(x)		((x) << 6)
>  
>  /* Config Register Bit Designations (AD7152_REG_CFG) */
> -#define AD7152_CONF_CH2EN		(1 << 3)
> -#define AD7152_CONF_CH1EN		(1 << 4)
> +#define AD7152_CONF_CH2EN		BIT(3)
> +#define AD7152_CONF_CH1EN		BIT(4)
>  #define AD7152_CONF_MODE_IDLE		(0 << 0)
> -#define AD7152_CONF_MODE_CONT_CONV	(1 << 0)
> +#define AD7152_CONF_MODE_CONT_CONV	BIT(0)
>  #define AD7152_CONF_MODE_SINGLE_CONV	(2 << 0)
>  #define AD7152_CONF_MODE_OFFS_CAL	(5 << 0)
>  #define AD7152_CONF_MODE_GAIN_CAL	(6 << 0)
>  
>  /* Capdac Register Bit Designations (AD7152_REG_CAPDAC_XXX) */
> -#define AD7152_CAPDAC_DACEN		(1 << 7)
> +#define AD7152_CAPDAC_DACEN		BIT(7)
>  #define AD7152_CAPDAC_DACP(x)		((x) & 0x1F)
>  
>  /* CFG2 Register Bit Designations (AD7152_REG_CFG2) */
> -- 
> 2.1.4
> 
> 

  reply	other threads:[~2015-09-10  6:01 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-10  4:13 [PATCH 1/6] Staging: iio: addac: adt7316.c : Prefer using " Shraddha Barke
2015-09-10  4:13 ` [PATCH 2/6] Staging: iio: cdc: ad7152.c: Prefer using the " Shraddha Barke
2015-09-10  6:01   ` Julia Lawall [this message]
2015-09-10  4:13 ` [PATCH 3/6] Staging: iio: meter: " Shraddha Barke
2015-09-10  4:13 ` [PATCH 4/6] Staging: iio: cdc: ad7746.c: " Shraddha Barke
2015-09-10  5:59   ` Julia Lawall
2015-09-10  4:13 ` [PATCH 5/6] Staging: iio: impedance-analyzer: " Shraddha Barke
2015-09-10  5:57   ` Julia Lawall
2015-09-10 10:05     ` Shraddha Barke
2015-09-10 12:42       ` Julia Lawall
2015-09-10  4:13 ` [PATCH 6/6] Staging: iio: resolver: " Shraddha Barke
2015-09-10  4:24   ` Joe Perches
2015-09-10  8:05     ` Julia Lawall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.02.1509100800511.2148@localhost6.localdomain6 \
    --to=julia.lawall@lip6.fr \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=shraddha.6596@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®