mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: "Charles (Chas) Williams" <ciwillia@brocade.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	"M. Vefa Bicakci" <m.v.b@runbox.com>
Subject: Re: [RFC PATCH] perf/x86/intel/rapl: avoid access unallocate memory
Date: Mon, 7 Nov 2016 21:20:53 +0100 (CET)	[thread overview]
Message-ID: <alpine.DEB.2.20.1611072117040.3501@nanos> (raw)
In-Reply-To: <58e229e2-91f4-a97f-1b9f-089f48ef994a@brocade.com>

On Mon, 7 Nov 2016, Charles (Chas) Williams wrote:
> On 11/07/2016 11:19 AM, Thomas Gleixner wrote:
> > On Wed, 2 Nov 2016, Charles (Chas) Williams wrote:
> > > I don't know why the CPU's phys_proc_id is 2.
> > 
> > max_physical_pkg_id gets initialized via:
> > 
> >     cpus = boot_cpu_data.x86_max_cores;
> >     max_physical_pkg_id = DIV_ROUND_UP(MAX_LOCAL_APIC, ncpus);
> > 
> > What's the value of boot_cpu_data.x86_max_cores and MAX_LOCAL_APIC?
> 
> I have discovered that that is not the problem.  smp_init_package_map()
> is calculating the physical core id using the following:
> 
>         for_each_present_cpu(cpu) {
>                 unsigned int apicid = apic->cpu_present_to_apicid(cpu);
> 
> 		...
> 		if (!topology_update_package_map(apicid, cpu))
>                         continue;
> 
> 	...
> 	int topology_update_package_map(unsigned int apicid, unsigned int cpu)
> 	{
> 		unsigned int new, pkg = apicid >>
> boot_cpu_data.x86_coreid_bits;
> 
> But later when the secondary CPU's are identified they use a different
> calculation using the local APIC ID from the CPU's registers:
> 
> 	static void generic_identify(struct cpuinfo_x86 *c)
> 	...
>         if (c->cpuid_level >= 0x00000001) {
>                 c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
> 	...
> 		c->phys_proc_id = c->initial_apicid;
> 
> So at the end of identify_cpu() when the boot/hotplug assignment is
> put back:
> 
>         c->logical_proc_id = topology_phys_to_logical_pkg(c->phys_proc_id);
> 
> topology_phys_to_logical_pkg() is returning an invalid logical processor
> since one isn't configured.
> 
> It's not clear to me what the right thing to do is or which is right.

Nice detective work! So the issue is that the package mapping code honours
boot_cpu_data.x86_coreid_bit, while generic_identify does
not. boot_cpu_data.x86_coreid_bit is obviously 1 in your case. Tentative
fix below. I still need to gow through that maze and figure out what could
go wrong with that :(

Thanks,

	tglx

8<------------------------
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -905,6 +905,8 @@ static void detect_null_seg_behavior(str
 
 static void generic_identify(struct cpuinfo_x86 *c)
 {
+	unsigned int pkg;
+
 	c->extended_cpuid_level = 0;
 
 	if (!have_cpuid_p())
@@ -929,7 +931,8 @@ static void generic_identify(struct cpui
 		c->apicid = c->initial_apicid;
 # endif
 #endif
-		c->phys_proc_id = c->initial_apicid;
+		pkg = c->initial_apicid >> boot_cpu_data.x86_coreid_bits;
+		c->phys_proc_id = pkg;
 	}
 
 	get_model_name(c); /* Default name */

  reply	other threads:[~2016-11-07 20:23 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-02 12:25 Sebastian Andrzej Siewior
2016-11-02 22:47 ` Charles (Chas) Williams
2016-11-03 17:47   ` Sebastian Andrzej Siewior
2016-11-04 12:20     ` Charles (Chas) Williams
2016-11-04 18:03       ` Sebastian Andrzej Siewior
2016-11-04 20:42         ` Charles (Chas) Williams
2016-11-04 20:57           ` Sebastian Andrzej Siewior
2016-11-07 16:19   ` Thomas Gleixner
2016-11-07 16:59     ` Charles (Chas) Williams
2016-11-07 20:20       ` Thomas Gleixner [this message]
2016-11-08 14:20         ` Charles (Chas) Williams
2016-11-08 14:31           ` Thomas Gleixner
2016-11-08 14:57             ` Charles (Chas) Williams
2016-11-08 16:22               ` Thomas Gleixner
2016-11-09 15:35                 ` [PATCH] x86/cpuid: Deal with broken firmware once more Thomas Gleixner
2016-11-09 15:37                   ` Thomas Gleixner
2016-11-09 16:03                   ` Peter Zijlstra
2016-11-09 16:34                     ` Charles (Chas) Williams
2016-11-09 18:37                       ` Thomas Gleixner
2016-11-09 18:15                   ` Charles (Chas) Williams
2016-11-09 20:27                   ` [tip:x86/urgent] x86/cpu: Deal with broken firmware (VMWare/XEN) tip-bot for Thomas Gleixner
2016-11-11  5:49                     ` Alok Kataria
2016-11-10  3:57                   ` [PATCH] x86/cpuid: Deal with broken firmware once more M. Vefa Bicakci
2016-11-10 10:50                     ` Charles (Chas) Williams
2016-11-10 11:14                       ` Thomas Gleixner
2016-11-12 22:05                       ` M. Vefa Bicakci
2016-11-10 11:13                     ` Thomas Gleixner
2016-11-10 11:39                       ` Peter Zijlstra
2016-11-10 14:02                       ` Boris Ostrovsky
2016-11-10 15:05                         ` Charles (Chas) Williams
2016-11-10 15:31                           ` Boris Ostrovsky
2016-11-10 15:54                             ` Sebastian Andrzej Siewior
2016-11-10 17:15                             ` Thomas Gleixner
2016-11-12 22:05                             ` M. Vefa Bicakci
2016-11-13 18:04                               ` Boris Ostrovsky
2016-11-13 23:42                                 ` M. Vefa Bicakci
2016-11-15  1:21                                   ` Boris Ostrovsky
2016-11-18 11:16                                     ` Thomas Gleixner
2016-11-18 14:22                                       ` Boris Ostrovsky
2016-11-10 15:12                         ` Thomas Gleixner
2016-11-10 15:38                           ` Boris Ostrovsky
2016-11-10 17:13                             ` Thomas Gleixner
2016-11-10 18:01                               ` Boris Ostrovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.20.1611072117040.3501@nanos \
    --to=tglx@linutronix.de \
    --cc=bigeasy@linutronix.de \
    --cc=ciwillia@brocade.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.v.b@runbox.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®