From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1751325AbdEaPSn (ORCPT <rfc822;w@1wt.eu>);
        Wed, 31 May 2017 11:18:43 -0400
Received: from Galois.linutronix.de ([146.0.238.70]:32809 "EHLO
        Galois.linutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1750998AbdEaPSm (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Wed, 31 May 2017 11:18:42 -0400
Date: Wed, 31 May 2017 17:18:38 +0200 (CEST)
From: Thomas Gleixner <tglx@linutronix.de>
To: Marc Zyngier <marc.zyngier@arm.com>
cc: LKML <linux-kernel@vger.kernel.org>, jeffy <jeffy.chen@rock-chips.com>,
        Brian Norris <briannorris@chromium.org>, dianders@chromium.org,
        tfiga@chromium.org
Subject: Re: [patch 1/2] genirq: Handle NOAUTOEN interrupt setup proper
In-Reply-To: <333511ca-9c5d-1a78-1c29-ebd172d6fe2f@arm.com>
Message-ID: <alpine.DEB.2.20.1705311715020.2356@nanos>
References: <20170531095831.291595474@linutronix.de> <20170531100212.130986205@linutronix.de> <333511ca-9c5d-1a78-1c29-ebd172d6fe2f@arm.com>
User-Agent: Alpine 2.20 (DEB 67 2015-01-07)
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On Wed, 31 May 2017, Marc Zyngier wrote:
> On 31/05/17 10:58, Thomas Gleixner wrote:
> >  #define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
> > @@ -329,6 +330,11 @@ static inline void irqd_clr_activated(st
> >  	__irqd_to_state(d) &= ~IRQD_ACTIVATED;
> >  }
> >  
> > +static inline bool irqd_is_started_up(struct irq_data *d)
> 
> nit: since we have set/clr_started, consider making this is_started
> (without the up)? Or add the _up to clr/set?

Sure.

> > +{
> > +	return __irqd_to_state(d) & IRQD_IRQ_STARTED_UP;
> > +}
> > +
> >  #undef __irqd_to_state
> >  
> >  static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)
> > --- a/kernel/irq/chip.c
> > +++ b/kernel/irq/chip.c
> > @@ -185,37 +185,71 @@ static void irq_state_set_masked(struct
> >  	irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
> >  }
> >  
> > +static void irq_state_clr_started(struct irq_desc *desc)
> > +{
> > +	irqd_clear(&desc->irq_data, IRQD_IRQ_STARTED_UP);
> > +}
> > +
> > +static void irq_state_set_started(struct irq_desc *desc)
> > +{
> > +	irqd_set(&desc->irq_data, IRQD_IRQ_STARTED_UP);
> > +}
> > +
> >  int irq_startup(struct irq_desc *desc, bool resend)
> >  {
> >  	int ret = 0;
> >  
> > -	irq_state_clr_disabled(desc);
> > +	if (irqd_is_started_up(&desc->irq_data))
> > +		return 0;
> > +
> 
> How about:
> 	if (irqd_is_started_up(&desc->irq_data)) {
> 		irq_enable(desc);
> 		return 0;

Why would we do that? I rather have a WARN_ON() there as this should never
happen.

> > +	/*
> > +	 * This must be called even if the interrupt was never started up,
> > +	 * because the activation can happen before the interrupt is
> > +	 * available for request/startup. It has it's own state tracking so
> > +	 * it's safe to call it unconditonally.
> 
>                                 unconditionally?

Oops.

> >  extern int irq_startup(struct irq_desc *desc, bool resend);
> >  extern void irq_shutdown(struct irq_desc *desc);
> > +extern void irq_enable_or_startup(struct irq_desc *desc);
> >  extern void irq_enable(struct irq_desc *desc);
> >  extern void irq_disable(struct irq_desc *desc);
> >  extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
> > --- a/kernel/irq/manage.c
> > +++ b/kernel/irq/manage.c
> > @@ -533,7 +533,7 @@ void __enable_irq(struct irq_desc *desc)
> >  			goto err_out;
> >  		/* Prevent probing on this irq: */
> >  		irq_settings_set_noprobe(desc);
> > -		irq_enable(desc);
> > +		irq_enable_or_startup(desc);
> 
> and make this irq_startup(desc, false)?

Ah, now I see where you were heading with that irq_startup()
modification. Makes sense, but let me think about it.

Thanks,

	tglx