From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@kernel.org>, "H. Peter Anvin" <hpa@zytor.com>
Subject: [GIT pull] timer fixes for 4.12
Date: Sun, 18 Jun 2017 11:34:33 +0200 (CEST) [thread overview]
Message-ID: <alpine.DEB.2.20.1706181131160.2428@nanos> (raw)
Linus,
please pull the latest timers-urgent-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-urgent-for-linus
Three fixlets for timers:
- Two hot-fixes for the alarmtimer based posix timers, which prevent
a nasty DOS by self rescheduling timers. The proper cleanup of that
mess is queued for 4.13
- Make a function static
Thanks,
tglx
------------------>
Stephen Boyd (1):
tick/broadcast: Make tick_broadcast_setup_oneshot() static
Thomas Gleixner (2):
alarmtimer: Prevent overflow of relative timers
alarmtimer: Rate limit periodic intervals
kernel/time/alarmtimer.c | 14 +++++++++++---
kernel/time/tick-broadcast.c | 4 +++-
kernel/time/tick-internal.h | 2 --
3 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 5cb5b0008d97..ee2f4202d82a 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -387,7 +387,7 @@ void alarm_start_relative(struct alarm *alarm, ktime_t start)
{
struct alarm_base *base = &alarm_bases[alarm->type];
- start = ktime_add(start, base->gettime());
+ start = ktime_add_safe(start, base->gettime());
alarm_start(alarm, start);
}
EXPORT_SYMBOL_GPL(alarm_start_relative);
@@ -475,7 +475,7 @@ u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval)
overrun++;
}
- alarm->node.expires = ktime_add(alarm->node.expires, interval);
+ alarm->node.expires = ktime_add_safe(alarm->node.expires, interval);
return overrun;
}
EXPORT_SYMBOL_GPL(alarm_forward);
@@ -660,13 +660,21 @@ static int alarm_timer_set(struct k_itimer *timr, int flags,
/* start the timer */
timr->it.alarm.interval = timespec64_to_ktime(new_setting->it_interval);
+
+ /*
+ * Rate limit to the tick as a hot fix to prevent DOS. Will be
+ * mopped up later.
+ */
+ if (timr->it.alarm.interval < TICK_NSEC)
+ timr->it.alarm.interval = TICK_NSEC;
+
exp = timespec64_to_ktime(new_setting->it_value);
/* Convert (if necessary) to absolute time */
if (flags != TIMER_ABSTIME) {
ktime_t now;
now = alarm_bases[timr->it.alarm.alarmtimer.type].gettime();
- exp = ktime_add(now, exp);
+ exp = ktime_add_safe(now, exp);
}
alarm_start(&timr->it.alarm.alarmtimer, exp);
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 987e496bb51a..b398c2ea69b2 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -37,9 +37,11 @@ static int tick_broadcast_forced;
static __cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(tick_broadcast_lock);
#ifdef CONFIG_TICK_ONESHOT
+static void tick_broadcast_setup_oneshot(struct clock_event_device *bc);
static void tick_broadcast_clear_oneshot(int cpu);
static void tick_resume_broadcast_oneshot(struct clock_event_device *bc);
#else
+static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { BUG(); }
static inline void tick_broadcast_clear_oneshot(int cpu) { }
static inline void tick_resume_broadcast_oneshot(struct clock_event_device *bc) { }
#endif
@@ -867,7 +869,7 @@ static void tick_broadcast_init_next_event(struct cpumask *mask,
/**
* tick_broadcast_setup_oneshot - setup the broadcast device
*/
-void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
+static void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
{
int cpu = smp_processor_id();
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index f738251000fe..be0ac01f2e12 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -126,7 +126,6 @@ static inline int tick_check_oneshot_change(int allow_nohz) { return 0; }
/* Functions related to oneshot broadcasting */
#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) && defined(CONFIG_TICK_ONESHOT)
-extern void tick_broadcast_setup_oneshot(struct clock_event_device *bc);
extern void tick_broadcast_switch_to_oneshot(void);
extern void tick_shutdown_broadcast_oneshot(unsigned int cpu);
extern int tick_broadcast_oneshot_active(void);
@@ -134,7 +133,6 @@ extern void tick_check_oneshot_broadcast_this_cpu(void);
bool tick_broadcast_oneshot_available(void);
extern struct cpumask *tick_get_broadcast_oneshot_mask(void);
#else /* !(BROADCAST && ONESHOT): */
-static inline void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { BUG(); }
static inline void tick_broadcast_switch_to_oneshot(void) { }
static inline void tick_shutdown_broadcast_oneshot(unsigned int cpu) { }
static inline int tick_broadcast_oneshot_active(void) { return 0; }
next reply other threads:[~2017-06-18 9:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-18 9:34 Thomas Gleixner [this message]
-- strict thread matches above, loose matches on Subject: below --
2017-06-25 9:49 Thomas Gleixner
2017-05-27 8:45 Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.20.1706181131160.2428@nanos \
--to=tglx@linutronix.de \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®