From: Linus Torvalds <torvalds@linux-foundation.org>
To: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
auke-jan.h.kok@intel.com, jeff@garzik.org,
"David S. Miller" <davem@davemloft.net>,
akpm <akpm@linux-foundation.org>
Subject: Re: Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"
Date: Wed, 30 Jan 2008 16:51:04 +1100 (EST) [thread overview]
Message-ID: <alpine.LFD.1.00.0801301631400.3426@www.l.google.com> (raw)
In-Reply-To: <20080129212314.91b9bb5b.randy.dunlap@oracle.com>
On Tue, 29 Jan 2008, Randy Dunlap wrote:
>
> Andrew was concerned about this when the driver was in -mm.
> He asked for a patch that would set E1000E to same value as E1000
> and I supplied that. Auke acked it IIRC. Other people vetoed it. :(
Yeah, I've been discussing with Jeff and the gang.
I think we have agreed on a solution where the ID's show up in the old
driver if the new driver is not enabled at all.
(And as a side note: it turns out that the problem I experienced didn't
come from the new e1000e driver after all, so I'll be removing the
EXPERIMENTAL flag again).
So I'd suggest the final patch be something like this, but I'm sendign it
out just as an example of how we could solve this, not necessarily as a
final patch.
Jeff, Auke, would something like this be acceptable? It makes it very
obvious in the driver table which entries are for the PCIE versions that
would be handled by the E1000E driver if it is enabled..
Untested, but as mentioned, this is more of a "this looks maintainable and
like it should solve the issues" rather than anything I was planning on
committing now.
Linus
---
drivers/net/Kconfig | 5 ++-
drivers/net/e1000/e1000_main.c | 60 ++++++++++++++++++++++------------------
2 files changed, 37 insertions(+), 28 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5a2d1dd..6c57540 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1992,7 +1992,7 @@ config E1000_DISABLE_PACKET_SPLIT
config E1000E
tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
- depends on PCI && EXPERIMENTAL
+ depends on PCI
---help---
This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
ethernet family of adapters. For PCI or PCI-X e1000 adapters,
@@ -2009,6 +2009,9 @@ config E1000E
To compile this driver as a module, choose M here. The module
will be called e1000e.
+config E1000E_ENABLED
+ def_bool E1000E != n
+
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 3111af6..8c87940 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -47,6 +47,12 @@ static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation
* Macro expands to...
* {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
*/
+#ifdef CONFIG_E1000E_ENABLED
+ #define PCIE(x)
+#else
+ #define PCIE(x) x,
+#endif
+
static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1000),
INTEL_E1000_ETHERNET_DEVICE(0x1001),
@@ -73,14 +79,14 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x1026),
INTEL_E1000_ETHERNET_DEVICE(0x1027),
INTEL_E1000_ETHERNET_DEVICE(0x1028),
- INTEL_E1000_ETHERNET_DEVICE(0x1049),
- INTEL_E1000_ETHERNET_DEVICE(0x104A),
- INTEL_E1000_ETHERNET_DEVICE(0x104B),
- INTEL_E1000_ETHERNET_DEVICE(0x104C),
- INTEL_E1000_ETHERNET_DEVICE(0x104D),
- INTEL_E1000_ETHERNET_DEVICE(0x105E),
- INTEL_E1000_ETHERNET_DEVICE(0x105F),
- INTEL_E1000_ETHERNET_DEVICE(0x1060),
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1049))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104A))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104B))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104C))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x104D))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105E))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x105F))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1060))
INTEL_E1000_ETHERNET_DEVICE(0x1075),
INTEL_E1000_ETHERNET_DEVICE(0x1076),
INTEL_E1000_ETHERNET_DEVICE(0x1077),
@@ -89,28 +95,28 @@ static struct pci_device_id e1000_pci_tbl[] = {
INTEL_E1000_ETHERNET_DEVICE(0x107A),
INTEL_E1000_ETHERNET_DEVICE(0x107B),
INTEL_E1000_ETHERNET_DEVICE(0x107C),
- INTEL_E1000_ETHERNET_DEVICE(0x107D),
- INTEL_E1000_ETHERNET_DEVICE(0x107E),
- INTEL_E1000_ETHERNET_DEVICE(0x107F),
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107D))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107E))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x107F))
INTEL_E1000_ETHERNET_DEVICE(0x108A),
- INTEL_E1000_ETHERNET_DEVICE(0x108B),
- INTEL_E1000_ETHERNET_DEVICE(0x108C),
- INTEL_E1000_ETHERNET_DEVICE(0x1096),
- INTEL_E1000_ETHERNET_DEVICE(0x1098),
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108B))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x108C))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1096))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x1098))
INTEL_E1000_ETHERNET_DEVICE(0x1099),
- INTEL_E1000_ETHERNET_DEVICE(0x109A),
- INTEL_E1000_ETHERNET_DEVICE(0x10A4),
- INTEL_E1000_ETHERNET_DEVICE(0x10A5),
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x109A))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A4))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10A5))
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
- INTEL_E1000_ETHERNET_DEVICE(0x10B9),
- INTEL_E1000_ETHERNET_DEVICE(0x10BA),
- INTEL_E1000_ETHERNET_DEVICE(0x10BB),
- INTEL_E1000_ETHERNET_DEVICE(0x10BC),
- INTEL_E1000_ETHERNET_DEVICE(0x10C4),
- INTEL_E1000_ETHERNET_DEVICE(0x10C5),
- INTEL_E1000_ETHERNET_DEVICE(0x10D5),
- INTEL_E1000_ETHERNET_DEVICE(0x10D9),
- INTEL_E1000_ETHERNET_DEVICE(0x10DA),
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10B9))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BA))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BB))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10BC))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C4))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10C5))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D5))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10D9))
+PCIE( INTEL_E1000_ETHERNET_DEVICE(0x10DA))
/* required last entry */
{0,}
};
next prev parent reply other threads:[~2008-01-30 5:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200801292359.m0TNxb75011826@hera.kernel.org>
2008-01-30 5:23 ` Randy Dunlap
2008-01-30 5:51 ` Linus Torvalds [this message]
2008-01-30 5:54 ` Linus Torvalds
2008-01-30 10:05 ` Jeff Garzik
2008-01-30 16:23 ` Kok, Auke
2008-01-30 23:58 ` Adrian Bunk
2008-01-31 1:26 ` Frans Pop
2008-01-31 4:59 ` Brandeburg, Jesse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.00.0801301631400.3426@www.l.google.com \
--to=torvalds@linux-foundation.org \
--cc=akpm@linux-foundation.org \
--cc=auke-jan.h.kok@intel.com \
--cc=davem@davemloft.net \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=randy.dunlap@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®