From: Thomas Gleixner <tglx@linutronix.de>
To: Andi Kleen <andi@firstfloor.org>
Cc: andreas.herrmann3@amd.com, mingo@elte.hu, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] [7/7] CPA: Add statistics about state of direct mapping v2
Date: Fri, 21 Mar 2008 18:41:59 +0100 (CET) [thread overview]
Message-ID: <alpine.LFD.1.00.0803211822220.3781@apollo.tec.linutronix.de> (raw)
In-Reply-To: <20080312025333.BAF5F1B41D1@basil.firstfloor.org>
On Wed, 12 Mar 2008, Andi Kleen wrote:
> Add information about the mapping state of the direct mapping to
> /proc/meminfo.
Please use debugfs for this.
> This way we can see how many large pages are really used for it and how
> many are split.
>
> Useful for debugging and general insight into the kernel.
>
> v2: Add hotplug locking to 64bit to plug a very obscure theoretical race.
> 32bit doesn't need it because it doesn't support hotadd for lowmem.
> Fix some typos
>
> Signed-off-by: Andi Kleen <ak@suse.de>
>
> ---
> arch/x86/mm/init_32.c | 2 ++
> arch/x86/mm/init_64.c | 2 ++
> arch/x86/mm/pageattr.c | 24 ++++++++++++++++++++++++
> fs/proc/proc_misc.c | 7 +++++++
> include/asm-x86/pgtable.h | 3 +++
> 5 files changed, 38 insertions(+)
>
> Index: linux/arch/x86/mm/init_64.c
> ===================================================================
> --- linux.orig/arch/x86/mm/init_64.c
> +++ linux/arch/x86/mm/init_64.c
> @@ -319,6 +319,8 @@ __meminit void early_iounmap(void *addr,
> static unsigned long __meminit
> phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
> {
> + unsigned long flags;
> + unsigned pages = 0;
Can we use unsigned long for both please and safe one line ?
> int i = pmd_index(address);
>
> for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) {
> @@ -335,9 +337,15 @@ phys_pmd_init(pmd_t *pmd_page, unsigned
> if (pmd_val(*pmd))
> continue;
>
> + pages++;
> set_pte((pte_t *)pmd,
> pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
> }
> +
> + /* Protect against CPA */
> + spin_lock_irqsave(&pgd_lock, flags);
> + dpages_cnt[PG_LEVEL_2M] += pages;
> + spin_unlock_irqrestore(&pgd_lock, flags);
Please make the update a debugfs conditional function in the CPA
code. That way it can be compile out and the statistic internals are
not scattered all over the place.
> @@ -356,6 +364,8 @@ phys_pmd_update(pud_t *pud, unsigned lon
> static unsigned long __meminit
> phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
> {
> + unsigned long flags;
> + unsigned pages = 0;
> unsigned long true_end = end;
See above.
> int i = pud_index(addr);
>
> @@ -380,6 +390,7 @@ phys_pud_init(pud_t *pud_page, unsigned
> }
>
> if (direct_gbpages) {
> + dpages_cnt[PG_LEVEL_1G]++;
> set_pte((pte_t *)pud,
> pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
> true_end = (addr & PUD_MASK) + PUD_SIZE;
> @@ -397,6 +408,11 @@ phys_pud_init(pud_t *pud_page, unsigned
> }
> __flush_tlb_all();
>
> + /* Protect against CPA */
> + spin_lock_irqsave(&pgd_lock, flags);
> + dpages_cnt[PG_LEVEL_1G] += pages;
> + spin_unlock_irqrestore(&pgd_lock, flags);
> +
See above
> return true_end >> PAGE_SHIFT;
> }
>
> Index: linux/arch/x86/mm/pageattr.c
> ===================================================================
> --- linux.orig/arch/x86/mm/pageattr.c
> +++ linux/arch/x86/mm/pageattr.c
> @@ -18,6 +18,8 @@
> #include <asm/pgalloc.h>
> #include <asm/proto.h>
>
> +unsigned long dpages_cnt[PG_LEVEL_NUM];
Can we have some intuitive name for that like direct_pages_stats, so
it's clear that it is debug/statistics info ?
> /*
> * The current flushing context - we pass it instead of 5 arguments:
> */
> @@ -499,6 +501,12 @@ static int split_large_page(pte_t *kpte,
> for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc)
> set_pte(&pbase[i], pfn_pte(pfn, ref_prot));
>
> + if (address >= (unsigned long)__va(0) &&
> + address < (unsigned long)__va(end_pfn_map << PAGE_SHIFT)) {
> + dpages_cnt[level]--;
> + dpages_cnt[level - 1] += PTRS_PER_PTE;
inline conditional on DEBUGFS please
> + }
> +
> /*
> * Install the new, split up pagetable. Important details here:
> *
> @@ -948,6 +956,22 @@ bool kernel_page_present(struct page *pa
>
> #endif /* CONFIG_DEBUG_PAGEALLOC */
>
> +#ifdef CONFIG_PROC_FS
debugfs please
Thanks,
tglx
next prev parent reply other threads:[~2008-03-21 17:42 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-12 2:53 [PATCH] [1/7] Implement true end_pfn_mapped for 32bit Andi Kleen
2008-03-12 2:53 ` [PATCH] [2/7] Account overlapped mappings in end_pfn_map Andi Kleen
2008-03-12 2:53 ` [PATCH] [3/7] Add set_memory_4k to pageattr.c Andi Kleen
2008-03-12 2:53 ` [PATCH] [4/7] Don't use large pages to map the first 2/4MB of memory Andi Kleen
2008-03-12 5:38 ` Eric Dumazet
2008-03-12 9:19 ` Andi Kleen
2008-03-21 17:45 ` Thomas Gleixner
2008-03-21 17:59 ` Andi Kleen
2008-03-21 18:03 ` Thomas Gleixner
2008-03-21 18:44 ` Andi Kleen
2008-03-25 11:31 ` Joerg Roedel
2008-03-25 11:39 ` Andi Kleen
2008-03-12 2:53 ` [PATCH] [5/7] Readd rdmsrl_safe Andi Kleen
2008-03-21 17:06 ` Thomas Gleixner
2008-03-21 17:16 ` Andi Kleen
2008-03-21 17:58 ` Thomas Gleixner
2008-03-21 18:06 ` Andi Kleen
2008-03-21 18:14 ` Thomas Gleixner
2008-03-21 18:46 ` Andi Kleen
2008-03-21 18:48 ` [PATCH] [5/7] Readd rdmsrl_safe II Andi Kleen
2008-03-22 9:59 ` [PATCH] Readd rdmsrl_safe v2 Andi Kleen
2008-03-12 2:53 ` [PATCH] [6/7] Split large page mapping for AMD TSEG Andi Kleen
2008-03-21 17:55 ` Thomas Gleixner
2008-03-25 11:56 ` Joerg Roedel
2008-03-25 16:44 ` Thomas Gleixner
2008-03-25 16:54 ` Andi Kleen
2008-03-12 2:53 ` [PATCH] [7/7] CPA: Add statistics about state of direct mapping v2 Andi Kleen
2008-03-21 17:41 ` Thomas Gleixner [this message]
2008-03-21 17:55 ` Andi Kleen
2008-03-22 9:50 ` [PATCH] CPA: Add statistics about state of direct mapping v3 Andi Kleen
2008-03-25 15:40 ` Thomas Gleixner
2008-03-25 16:14 ` Andi Kleen
2008-03-25 16:16 ` Thomas Gleixner
2008-03-25 17:01 ` [PATCH] CPA: Add statistics about state of direct mapping v4 Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.00.0803211822220.3781@apollo.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=andi@firstfloor.org \
--cc=andreas.herrmann3@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®