From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>
Subject: [GIT pull] generic irq updates
Date: Fri, 2 May 2008 15:02:34 +0200 (CEST) [thread overview]
Message-ID: <alpine.LFD.1.10.0805021502170.6003@apollo.tec.linutronix.de> (raw)
Linus,
please pull gerneric irq updates from:
ssh://master.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-genirq.git master
Thanks,
tglx
---
Thomas Gleixner (1):
genirq: reenable a nobody cared disabled irq when a new driver arrives
include/linux/irq.h | 1 +
kernel/irq/manage.c | 49 ++++++++++++++++++++++++++++++++-----------------
kernel/irq/spurious.c | 4 ++--
3 files changed, 35 insertions(+), 19 deletions(-)
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1883a85..552e0ec 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -61,6 +61,7 @@ typedef void (*irq_flow_handler_t)(unsigned int irq,
#define IRQ_WAKEUP 0x00100000 /* IRQ triggers system wakeup */
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
+#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 46e4ad1..46d6611 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -150,6 +150,26 @@ void disable_irq(unsigned int irq)
}
EXPORT_SYMBOL(disable_irq);
+static void __enable_irq(struct irq_desc *desc, unsigned int irq)
+{
+ switch (desc->depth) {
+ case 0:
+ printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
+ WARN_ON(1);
+ break;
+ case 1: {
+ unsigned int status = desc->status & ~IRQ_DISABLED;
+
+ /* Prevent probing on this irq: */
+ desc->status = status | IRQ_NOPROBE;
+ check_irq_resend(desc, irq);
+ /* fall-through */
+ }
+ default:
+ desc->depth--;
+ }
+}
+
/**
* enable_irq - enable handling of an irq
* @irq: Interrupt to enable
@@ -169,22 +189,7 @@ void enable_irq(unsigned int irq)
return;
spin_lock_irqsave(&desc->lock, flags);
- switch (desc->depth) {
- case 0:
- printk(KERN_WARNING "Unbalanced enable for IRQ %d\n", irq);
- WARN_ON(1);
- break;
- case 1: {
- unsigned int status = desc->status & ~IRQ_DISABLED;
-
- /* Prevent probing on this irq: */
- desc->status = status | IRQ_NOPROBE;
- check_irq_resend(desc, irq);
- /* fall-through */
- }
- default:
- desc->depth--;
- }
+ __enable_irq(desc, irq);
spin_unlock_irqrestore(&desc->lock, flags);
}
EXPORT_SYMBOL(enable_irq);
@@ -365,7 +370,7 @@ int setup_irq(unsigned int irq, struct irqaction *new)
compat_irq_chip_set_default_handler(desc);
desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
- IRQ_INPROGRESS);
+ IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
@@ -381,6 +386,16 @@ int setup_irq(unsigned int irq, struct irqaction *new)
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
+
+ /*
+ * Check whether we disabled the irq via the spurious handler
+ * before. Reenable it and give it another chance.
+ */
+ if (shared && (desc->status & IRQ_SPURIOUS_DISABLED)) {
+ desc->status &= ~IRQ_SPURIOUS_DISABLED;
+ __enable_irq(desc, irq);
+ }
+
spin_unlock_irqrestore(&desc->lock, flags);
new->irq = irq;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 088dabb..c66d3f1 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -209,8 +209,8 @@ void note_interrupt(unsigned int irq, struct irq_desc *desc,
* Now kill the IRQ
*/
printk(KERN_EMERG "Disabling IRQ #%d\n", irq);
- desc->status |= IRQ_DISABLED;
- desc->depth = 1;
+ desc->status |= IRQ_DISABLED | IRQ_SPURIOUS_DISABLED;
+ desc->depth++;
desc->chip->disable(irq);
}
desc->irqs_unhandled = 0;
reply other threads:[~2008-05-02 13:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.10.0805021502170.6003@apollo.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®