From: Linus Torvalds <torvalds@linux-foundation.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Jesse Barnes <jesse.barnes@intel.com>,
Andreas Schwab <schwab@suse.de>, Len Brown <lenb@kernel.org>,
Ingo Molnar <mingo@elte.hu>
Subject: Re: PCI PM: Restore standard config registers of all devices early
Date: Mon, 2 Feb 2009 19:47:13 -0800 (PST) [thread overview]
Message-ID: <alpine.LFD.2.00.0902021941120.3247@localhost.localdomain> (raw)
In-Reply-To: <1233631820.16867.27.camel@pasglop>
On Tue, 3 Feb 2009, Benjamin Herrenschmidt wrote:
> On Tue, 2009-02-03 at 12:46 +1100, Benjamin Herrenschmidt wrote:
> >
> > Radeons don't do much with config space... the worst we may miss I
> > suppose is subsystem vendor/device... Maybe I'll add something to
> > explicitely save and restore it or X might get upset. I'll have a look.
>
> Actually, subsystem stuff is below 0x40 so it should be fine too.
The things above 0x40 tend to be:
- capabilities (values and next-pointers)
The PCI layer will save a random couple of these (read: the ones it
cares about)
- random non-architected values specific to that chip. And sometimes
these are important. Like ISA interrupt routing information for cardbus
controllers. Or timing values set up by the BIOS.
but in 99% of all cases the stuff isn't really anything special, or is
just fine at its cold-reset default values. But I could in theory see that
some graphics card could hide things like DRAM timings in there, that get
initialized on POST, but not (obviously) on a STR cycle.
So it could go either way. Totally unimportant or hugely important. Most
cards don't seem to care, and saving just the low 64 bytes seems to work
for almost all drivers.
Linus
next prev parent reply other threads:[~2009-02-03 3:48 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200901261904.n0QJ4Q9c016709@hera.kernel.org>
2009-02-02 9:54 ` Benjamin Herrenschmidt
2009-02-02 17:06 ` Linus Torvalds
2009-02-02 20:29 ` Benjamin Herrenschmidt
2009-02-02 20:41 ` Linus Torvalds
2009-02-02 21:00 ` Benjamin Herrenschmidt
2009-02-02 21:32 ` Rafael J. Wysocki
2009-02-02 20:33 ` Benjamin Herrenschmidt
2009-02-02 20:50 ` Linus Torvalds
2009-02-02 20:55 ` Linus Torvalds
2009-02-02 21:19 ` Benjamin Herrenschmidt
2009-02-02 21:39 ` Rafael J. Wysocki
2009-02-02 22:05 ` Linus Torvalds
2009-02-02 22:09 ` Linus Torvalds
2009-02-02 22:31 ` Rafael J. Wysocki
2009-02-02 23:18 ` Linus Torvalds
2009-02-02 23:45 ` Rafael J. Wysocki
2009-02-02 23:59 ` Linus Torvalds
2009-02-03 0:15 ` Rafael J. Wysocki
2009-02-03 0:28 ` Linus Torvalds
2009-02-03 1:12 ` Benjamin Herrenschmidt
2009-02-03 1:32 ` Linus Torvalds
2009-02-03 1:46 ` Benjamin Herrenschmidt
2009-02-03 3:30 ` Benjamin Herrenschmidt
2009-02-03 3:47 ` Linus Torvalds [this message]
2009-02-03 4:03 ` Benjamin Herrenschmidt
2009-02-03 6:07 ` Benjamin Herrenschmidt
2009-02-03 15:48 ` Linus Torvalds
2009-02-03 22:59 ` Benjamin Herrenschmidt
2009-02-03 23:23 ` Rafael J. Wysocki
2009-02-03 16:33 ` Jesse Barnes
2009-02-03 0:15 ` Linus Torvalds
2009-02-03 0:58 ` Benjamin Herrenschmidt
2009-02-03 3:51 ` Benjamin Herrenschmidt
2009-02-03 3:55 ` Benjamin Herrenschmidt
2009-02-03 4:09 ` Linus Torvalds
2009-02-03 4:21 ` Benjamin Herrenschmidt
2009-02-03 9:26 ` Rafael J. Wysocki
2009-02-03 17:04 ` Reworking suspend-resume sequence (was: Re: PCI PM: Restore standard config registers of all devices early) Rafael J. Wysocki
2009-02-03 17:59 ` Linus Torvalds
2009-02-03 18:31 ` Linus Torvalds
2009-02-03 18:41 ` Ingo Molnar
2009-02-03 18:32 ` Jesse Barnes
2009-02-03 18:46 ` Linus Torvalds
2009-02-03 19:03 ` Linus Torvalds
2009-02-03 19:13 ` Ingo Molnar
2009-02-03 19:38 ` Linus Torvalds
2009-02-03 19:53 ` Ingo Molnar
2009-02-03 20:04 ` Ingo Molnar
2009-02-03 20:18 ` Linus Torvalds
2009-02-03 20:57 ` Ingo Molnar
2009-02-03 21:04 ` Ingo Molnar
2009-02-03 21:12 ` Thomas Gleixner
2009-02-04 10:07 ` Russell King
2009-02-03 21:18 ` Linus Torvalds
2009-02-03 19:19 ` Linus Torvalds
2009-02-03 21:11 ` Benjamin Herrenschmidt
2009-02-03 21:53 ` Rafael J. Wysocki
2009-02-03 22:33 ` Benjamin Herrenschmidt
2009-02-03 22:44 ` Rafael J. Wysocki
2009-02-03 23:05 ` Benjamin Herrenschmidt
2009-02-03 23:18 ` Linus Torvalds
2009-02-04 0:27 ` Benjamin Herrenschmidt
2009-03-04 8:02 ` Pavel Machek
2009-03-04 23:25 ` Benjamin Herrenschmidt
2009-03-05 8:19 ` Pavel Machek
2009-03-05 19:09 ` Rafael J. Wysocki
2009-02-03 23:25 ` Rafael J. Wysocki
2009-02-04 0:46 ` Linus Torvalds
2009-02-03 21:02 ` Benjamin Herrenschmidt
2009-02-03 21:56 ` Rafael J. Wysocki
2009-02-03 17:53 ` PCI PM: Restore standard config registers of all devices early Linus Torvalds
2009-02-03 21:57 ` Rafael J. Wysocki
2009-02-02 22:48 ` Benjamin Herrenschmidt
2009-02-02 23:00 ` Rafael J. Wysocki
2009-02-03 0:23 ` Benjamin Herrenschmidt
2009-02-03 0:29 ` Rafael J. Wysocki
2009-02-03 0:44 ` Linus Torvalds
2009-02-03 1:32 ` Benjamin Herrenschmidt
2009-02-03 5:06 ` Ingo Molnar
2009-02-03 11:06 ` Peter Zijlstra
2009-02-03 12:09 ` Ingo Molnar
2009-02-02 23:49 ` Ingo Molnar
2009-02-03 22:09 ` Rafael J. Wysocki
2009-02-03 23:13 ` Linus Torvalds
2009-02-02 22:28 ` Benjamin Herrenschmidt
2009-02-02 21:07 ` Benjamin Herrenschmidt
2009-02-02 21:49 ` Rafael J. Wysocki
2009-02-02 22:15 ` Linus Torvalds
2009-02-02 22:33 ` Rafael J. Wysocki
2009-02-02 22:56 ` Rafael J. Wysocki
2009-02-03 0:11 ` Benjamin Herrenschmidt
2009-02-03 0:21 ` Linus Torvalds
2009-02-10 20:25 ` Pavel Machek
2009-02-02 22:57 ` Benjamin Herrenschmidt
2009-02-02 23:22 ` Rafael J. Wysocki
2009-02-03 1:03 ` Benjamin Herrenschmidt
2009-02-10 20:25 ` kmalloc during suspend, was " Pavel Machek
2009-02-02 17:20 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.0902021941120.3247@localhost.localdomain \
--to=torvalds@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=jesse.barnes@intel.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=schwab@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome