From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
Florian Fainelli <florian@openwrt.org>
Subject: [GIT pull] irq cleanups for .39
Date: Mon, 28 Mar 2011 20:50:06 +0200 (CEST) [thread overview]
Message-ID: <alpine.LFD.2.00.1103282048370.2774@localhost6.localdomain6> (raw)
Linus,
Please pull the latest irq-cleanup-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq-cleanup-for-linus
Acked by Florian.
Thanks,
tglx
------------------>
Thomas Gleixner (1):
vlynq: Convert irq functions
drivers/vlynq/vlynq.c | 64 +++++++++++++++++++++++-------------------------
1 files changed, 31 insertions(+), 33 deletions(-)
diff --git a/drivers/vlynq/vlynq.c b/drivers/vlynq/vlynq.c
index f885c86..aa250ce 100644
--- a/drivers/vlynq/vlynq.c
+++ b/drivers/vlynq/vlynq.c
@@ -135,40 +135,40 @@ static void vlynq_reset(struct vlynq_device *dev)
msleep(5);
}
-static void vlynq_irq_unmask(unsigned int irq)
+static void vlynq_irq_unmask(struct irq_data *d)
{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
+ struct vlynq_device *dev = irq_data_get_irq_chip_data(d);
int virq;
+ u32 val;
BUG_ON(!dev);
- virq = irq - dev->irq_start;
+ virq = d->irq - dev->irq_start;
val = readl(&dev->remote->int_device[virq >> 2]);
val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
writel(val, &dev->remote->int_device[virq >> 2]);
}
-static void vlynq_irq_mask(unsigned int irq)
+static void vlynq_irq_mask(struct irq_data *d)
{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
+ struct vlynq_device *dev = irq_data_get_irq_chip_data(d);
int virq;
+ u32 val;
BUG_ON(!dev);
- virq = irq - dev->irq_start;
+ virq = d->irq - dev->irq_start;
val = readl(&dev->remote->int_device[virq >> 2]);
val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
writel(val, &dev->remote->int_device[virq >> 2]);
}
-static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
+static int vlynq_irq_type(struct irq_data *d, unsigned int flow_type)
{
- u32 val;
- struct vlynq_device *dev = get_irq_chip_data(irq);
+ struct vlynq_device *dev = irq_data_get_irq_chip_data(d);
int virq;
+ u32 val;
BUG_ON(!dev);
- virq = irq - dev->irq_start;
+ virq = d->irq - dev->irq_start;
val = readl(&dev->remote->int_device[virq >> 2]);
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
@@ -192,10 +192,9 @@ static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
return 0;
}
-static void vlynq_local_ack(unsigned int irq)
+static void vlynq_local_ack(struct irq_data *d)
{
- struct vlynq_device *dev = get_irq_chip_data(irq);
-
+ struct vlynq_device *dev = irq_data_get_irq_chip_data(d);
u32 status = readl(&dev->local->status);
pr_debug("%s: local status: 0x%08x\n",
@@ -203,10 +202,9 @@ static void vlynq_local_ack(unsigned int irq)
writel(status, &dev->local->status);
}
-static void vlynq_remote_ack(unsigned int irq)
+static void vlynq_remote_ack(struct irq_data *d)
{
- struct vlynq_device *dev = get_irq_chip_data(irq);
-
+ struct vlynq_device *dev = irq_data_get_irq_chip_data(d);
u32 status = readl(&dev->remote->status);
pr_debug("%s: remote status: 0x%08x\n",
@@ -238,23 +236,23 @@ static irqreturn_t vlynq_irq(int irq, void *dev_id)
static struct irq_chip vlynq_irq_chip = {
.name = "vlynq",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .set_type = vlynq_irq_type,
+ .irq_unmask = vlynq_irq_unmask,
+ .irq_mask = vlynq_irq_mask,
+ .irq_set_type = vlynq_irq_type,
};
static struct irq_chip vlynq_local_chip = {
.name = "vlynq local error",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .ack = vlynq_local_ack,
+ .irq_unmask = vlynq_irq_unmask,
+ .irq_mask = vlynq_irq_mask,
+ .irq_ack = vlynq_local_ack,
};
static struct irq_chip vlynq_remote_chip = {
.name = "vlynq local error",
- .unmask = vlynq_irq_unmask,
- .mask = vlynq_irq_mask,
- .ack = vlynq_remote_ack,
+ .irq_unmask = vlynq_irq_unmask,
+ .irq_mask = vlynq_irq_mask,
+ .irq_ack = vlynq_remote_ack,
};
static int vlynq_setup_irq(struct vlynq_device *dev)
@@ -291,17 +289,17 @@ static int vlynq_setup_irq(struct vlynq_device *dev)
for (i = dev->irq_start; i <= dev->irq_end; i++) {
virq = i - dev->irq_start;
if (virq == dev->local_irq) {
- set_irq_chip_and_handler(i, &vlynq_local_chip,
+ irq_set_chip_and_handler(i, &vlynq_local_chip,
handle_level_irq);
- set_irq_chip_data(i, dev);
+ irq_set_chip_data(i, dev);
} else if (virq == dev->remote_irq) {
- set_irq_chip_and_handler(i, &vlynq_remote_chip,
+ irq_set_chip_and_handler(i, &vlynq_remote_chip,
handle_level_irq);
- set_irq_chip_data(i, dev);
+ irq_set_chip_data(i, dev);
} else {
- set_irq_chip_and_handler(i, &vlynq_irq_chip,
+ irq_set_chip_and_handler(i, &vlynq_irq_chip,
handle_simple_irq);
- set_irq_chip_data(i, dev);
+ irq_set_chip_data(i, dev);
writel(0, &dev->remote->int_device[virq >> 2]);
}
}
next reply other threads:[~2011-03-28 18:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-28 18:50 Thomas Gleixner [this message]
2011-03-28 19:58 ` Linus Torvalds
2011-03-28 20:16 ` Thomas Gleixner
2011-03-28 20:29 ` Thomas Gleixner
2011-03-28 22:05 ` Linus Torvalds
2011-03-29 18:55 ` H. Peter Anvin
2011-03-29 19:03 ` Borislav Petkov
2011-03-29 19:08 ` Linus Torvalds
-- strict thread matches above, loose matches on Subject: below --
2011-03-27 20:34 Thomas Gleixner
2011-03-25 16:52 Thomas Gleixner
2011-03-25 19:40 ` Ingo Molnar
2011-03-26 11:43 ` richard -rw- weinberger
2011-03-26 19:12 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.1103282048370.2774@localhost6.localdomain6 \
--to=tglx@linutronix.de \
--cc=akpm@linux-foundation.org \
--cc=florian@openwrt.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®