From: Nicolas Pitre <nicolas.pitre@linaro.org>
To: Per Forlin <per.forlin@linaro.org>
Cc: linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
lkml <linux-kernel@vger.kernel.org>,
linaro-dev@lists.linaro.org,
Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>,
Ulf HANSSON <ulf.hansson@stericsson.com>
Subject: Re: [PATCH] sdio: optimized SDIO IRQ handling for single function
Date: Wed, 4 May 2011 11:20:08 -0400 (EDT) [thread overview]
Message-ID: <alpine.LFD.2.00.1105041117170.24613@xanadu.home> (raw)
In-Reply-To: <BANLkTim_x28NyWzo-Ug3+ZprgeT=VFwEfQ@mail.gmail.com>
On Wed, 4 May 2011, Per Forlin wrote:
> On 4 May 2011 05:40, Nicolas Pitre <nicolas.pitre@linaro.org> wrote:
> > On Tue, 3 May 2011, Per Forlin wrote:
> >
> >> From: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
> >>
> >> If there is only 1 function registered, and IRQ:s are supported and
> >> currently enabled, call the callback handler directly
> >> without checking the CCCR registers.
> >>
> >> Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
> >> Signed-off-by: Per Forlin <per.forlin@linaro.org>
> >
> > Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> >
> I am working o a patch version 2 after offline discussion with Ulf Hansson.
> Instead of adding this code here.
> Add sdio_single_func member in mmc_card. Set and reset this function
> in sdio_claim_irq and sdio_release_irq.
> process_sdio_pending_irqs would only check if sdio_single_func is !=
> null and call it.
Yes, that's what I was about to propose after thinking about it some
more.
> This will result in a bigger patch overall but the new code in
> process_sdio_pending_irqs will be minimal.
Something like this (untested) ?
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index b300161..4552727 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -32,6 +32,12 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
int i, ret, count;
unsigned char pending;
+ if (card->sdio_single_irq) {
+ struct sdio_func *func = card->sdio_single_irq;
+ func->irq_handler(func);
+ return 1;
+ }
+
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
if (ret) {
printk(KERN_DEBUG "%s: error %d reading SDIO_CCCR_INTx\n",
@@ -166,6 +172,7 @@ static int sdio_card_irq_get(struct mmc_card *card)
host->sdio_irqs--;
return err;
}
+ return 1;
}
return 0;
@@ -183,7 +190,7 @@ static int sdio_card_irq_put(struct mmc_card *card)
kthread_stop(host->sdio_irq_thread);
}
- return 0;
+ return (host->sdio_irqs == 1);
}
/**
@@ -225,8 +232,12 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
func->irq_handler = handler;
ret = sdio_card_irq_get(func->card);
- if (ret)
+ if (ret < 0) {
func->irq_handler = NULL;
+ } else if (ret == 1) {
+ card->sdio_single_irq = func;
+ ret = 0;
+ }
return ret;
}
@@ -250,7 +261,17 @@ int sdio_release_irq(struct sdio_func *func)
if (func->irq_handler) {
func->irq_handler = NULL;
- sdio_card_irq_put(func->card);
+ if (sdio_card_irq_put(func->card) == 1) {
+ int i;
+ for (i = 0, i < 7; i++) {
+ if (func->card->sdio_func[i].irq_handler) {
+ func->card->sdio_single_irq =
+ func->card->sdio_func[i];
+ break;
+ }
+ }
+ } else
+ func->card->sdio_single_irq = NULL;
}
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index adb4888..fee3df3 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -145,6 +145,7 @@ struct mmc_card {
struct sdio_cccr cccr; /* common card info */
struct sdio_cis cis; /* common tuple info */
struct sdio_func *sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+ struct sdio_func *sdio_single_irq; /* SDIO function when only one IRQ active */
unsigned num_info; /* number of info strings */
const char **info; /* info strings */
struct sdio_func_tuple *tuples; /* unknown common tuples */
Nicolas
next prev parent reply other threads:[~2011-05-04 15:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 20:04 Per Forlin
2011-05-04 3:40 ` Nicolas Pitre
2011-05-04 8:36 ` Per Forlin
2011-05-04 15:20 ` Nicolas Pitre [this message]
2011-05-04 16:03 ` Per Forlin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.1105041117170.24613@xanadu.home \
--to=nicolas.pitre@linaro.org \
--cc=linaro-dev@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=per.forlin@linaro.org \
--cc=stefan.xk.nilsson@stericsson.com \
--cc=ulf.hansson@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®