mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Simmons <jsimmons@infradead.org>
To: Cihangir Akturk <cakturk@gmail.com>
Cc: lustre-devel@lists.lustre.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org, oleg.drokin@intel.com,
	andreas.dilger@intel.com, gregkh@linuxfoundation.org
Subject: Re: [PATCH] staging: lustre: mgc: fix potential use after free in error path
Date: Mon, 14 Aug 2017 16:25:03 +0100 (BST)	[thread overview]
Message-ID: <alpine.LFD.2.20.1708141622350.14369@casper.infradead.org> (raw)
In-Reply-To: <1502102580-29556-1-git-send-email-cakturk@gmail.com>



On Mon, 7 Aug 2017, Cihangir Akturk wrote:

> The config_log_add() function first calls config_log_put() with the
> variable 'cld' and then jumps to label 'out_cld', which will call
> the same function with the same 'cld' variable. However, at this
> point, 'cld' might have been already freed by the first invocation
> of config_log_put(). Even if we remove the invocation at that point,
> we will still get into trouble. This is because, in the error path,
> just below the label 'out_cld', we try to put 'params_cls' and
> 'sptlrpc_cld', which might also have been freed by config_log_put().
> 
> The point is that, config_llog_data::cld_sptlrpc and
> config_llog_data::cld_params members are assigned at the beginning
> of this function.
> 
> To avoid this, do not call config_log_put() inside the else block,
> immediately jump to 'out_cld' instead. Moreover, remove assignments
> to config_llog_data::cld_sptlrpc and config_llog_data::cld_params at
> the beginning, since we already assign them below in the function
> with 'cld_lock' held.
> 
> As an additional benefit, code size gets smaller.
> 
> before:
> text    data     bss     dec     hex filename
> 26188   2256    4208   32652    7f8c drivers/staging/lustre/lustre/mgc/mgc_request.o
> 
> after:
> text    data     bss     dec     hex filename
> 26092   2256    4208   32556    7f2c drivers/staging/lustre/lustre/mgc/mgc_request.o
> 
> Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
> ---
>  drivers/staging/lustre/lustre/mgc/mgc_request.c | 16 +++-------------
>  1 file changed, 3 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/staging/lustre/lustre/mgc/mgc_request.c b/drivers/staging/lustre/lustre/mgc/mgc_request.c
> index eee0b66..36c3049 100644
> --- a/drivers/staging/lustre/lustre/mgc/mgc_request.c
> +++ b/drivers/staging/lustre/lustre/mgc/mgc_request.c
> @@ -288,7 +288,7 @@ config_log_add(struct obd_device *obd, char *logname,
>  	struct config_llog_data *cld;
>  	struct config_llog_data *sptlrpc_cld;
>  	struct config_llog_data *params_cld;
> -	bool locked = false;
> +	struct config_llog_data *recover_cld = NULL;
>  	char			seclogname[32];
>  	char			*ptr;
>  	int			rc;
> @@ -333,20 +333,14 @@ config_log_add(struct obd_device *obd, char *logname,
>  		goto out_params;
>  	}
>  
> -	cld->cld_sptlrpc = sptlrpc_cld;
> -	cld->cld_params = params_cld;
> -
>  	LASSERT(lsi->lsi_lmd);
>  	if (!(lsi->lsi_lmd->lmd_flags & LMD_FLG_NOIR)) {
> -		struct config_llog_data *recover_cld;
> -
>  		ptr = strrchr(seclogname, '-');
>  		if (ptr) {
>  			*ptr = 0;
>  		} else {
>  			CERROR("%s: sptlrpc log name not correct, %s: rc = %d\n",
>  			       obd->obd_name, seclogname, -EINVAL);
> -			config_log_put(cld);
>  			rc = -EINVAL;
>  			goto out_cld;
>  		}
> @@ -355,14 +349,10 @@ config_log_add(struct obd_device *obd, char *logname,
>  			rc = PTR_ERR(recover_cld);
>  			goto out_cld;
>  		}
> -
> -		mutex_lock(&cld->cld_lock);
> -		locked = true;
> -		cld->cld_recover = recover_cld;
>  	}
>  
> -	if (!locked)
> -		mutex_lock(&cld->cld_lock);
> +	mutex_lock(&cld->cld_lock);
> +	cld->cld_recover = recover_cld;
>  	cld->cld_params = params_cld;
>  	cld->cld_sptlrpc = sptlrpc_cld;
>  	mutex_unlock(&cld->cld_lock);
> -- 
> 2.7.4

Reviewed-by: James Simmons <jsimmons@infradead.org>

      reply	other threads:[~2017-08-14 15:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-07 10:43 Cihangir Akturk
2017-08-14 15:25 ` James Simmons [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.20.1708141622350.14369@casper.infradead.org \
    --to=jsimmons@infradead.org \
    --cc=andreas.dilger@intel.com \
    --cc=cakturk@gmail.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lustre-devel@lists.lustre.org \
    --cc=oleg.drokin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®