mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Meelis Roos <mroos@linux.ee>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <helgaas@kernel.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
	Yijing Wang <wangyijing@huawei.com>,
	Khalid Aziz <khalid.aziz@oracle.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v10 06/59] PCI: Kill wrong quirk about M7101
Date: Sat, 12 Mar 2016 09:52:03 +0200 (EET)	[thread overview]
Message-ID: <alpine.LRH.2.20.1603120951320.32556@math.ut.ee> (raw)
In-Reply-To: <CAE9FiQVAPfb-PYGQoRJzXdn3NAOK-X25M9pWvR2m7_9qT5qQ+w@mail.gmail.com>

> On Thu, Mar 10, 2016 at 9:40 AM, Bjorn Helgaas <helgaas@kernel.org> wrote:
> > On Wed, Feb 24, 2016 at 06:11:57PM -0800, Yinghai Lu wrote:
> >> Meelis reported that qla2000 driver does not get loaded on one sparc system.
> >>
> >> schizo f00732d0: PCI host bridge to bus 0001:00
> >> pci_bus 0001:00: root bus resource [io  0x7fe01000000-0x7fe01ffffff] (bus address [0x0000-0xffffff])
> >> pci 0001:00:06.0: quirk: [io  0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI
> >> pci 0001:00:06.0: quirk: [io  0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB
> >> pci 0001:00:07.0: can't claim BAR 0 [io  0x7fe01000000-0x7fe0100ffff]: address conflict with 0001:00:06.0 [io  0x7fe01000600-0x7fe0100061f]
> >>
> >> So the quirk for M7101 claim the io range early.

But why did it work until 4.2 and only with 4.3 the allocations broke?


> >>
> >> According to spec with M7101 in M1543 page 103/104,
> >>       http://www.versalogic.com/Support/Downloads/pdf/ali1543.pdf
> >> 0xe0, and 0xe2 do not include address info for acpi/smb.
> >>
> >> Kill wrong quirk about them.
> >
> > This needs an explanation for why the quirk was added in the first
> > place, and why it is now safe to remove it.
> 
> The related commit does not tell much about why it is there exactly.
> But it is added the same time with intel piix4.
> 
> Maybe Linus could have some hint about that quirk?
> 
> commit 34f550135e349102bd065488eabbbb217ab27f0d
> Author: Linus Torvalds <torvalds@linuxfoundation.org>
> Date:   Fri Nov 23 15:32:20 2007 -0500
> 
>     Import 2.3.49pre2
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index cda39a5..8029b19 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -113,6 +113,55 @@ static void __init quirk_s3_64M(struct pci_dev *dev)
>         }
>  }
> 
> +static void __init quirk_io_region(struct pci_dev *dev, unsigned region, unsign
> ed size, int nr)
> +{
> +       region &= ~(size-1);
> +       if (region) {
> +               struct resource *res = dev->resource + nr;
> +
> +               res->name = dev->name;
> +               res->start = region;
> +               res->end = region + size - 1;
> +               res->flags = IORESOURCE_IO;
> +               pci_claim_resource(dev, nr);
> +       }
> +}
> +
> +/*
> + * Let's make the southbridge information explicit instead
> + * of having to worry about people probing the ACPI areas,
> + * for example.. (Yes, it happens, and if you read the wrong
> + * ACPI register it will put the machine to sleep with no
> + * way of waking it up again. Bummer).
> + *
> + * ALI M7101: Two IO regions pointed to by words at
> + *     0xE0 (64 bytes of ACPI registers)
> + *     0xE2 (32 bytes of SMB registers)
> + */
> +static void __init quirk_ali7101(struct pci_dev *dev)
> +{
> +       u16 region;
> +
> +       pci_read_config_word(dev, 0xE0, &region);
> +       quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
> +       pci_read_config_word(dev, 0xE2, &region);
> +       quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
> +}
> +
> +/*
> + * PIIX4 ACPI: Two IO regions pointed to by longwords at
> + *     0x40 (64 bytes of ACPI registers)
> + *     0x90 (32 bytes of SMB registers)
> + */
> +static void __init quirk_piix4acpi(struct pci_dev *dev)
> +{
> +       u32 region;
> +
> +       pci_read_config_dword(dev, 0x40, &region);
> +       quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
> +       pci_read_config_dword(dev, 0x90, &region);
> +       quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
> +}
> 
>  /*
>   *  The main table of quirks.
> @@ -143,6 +192,8 @@ static struct pci_fixup pci_fixups[] __initdata = {
>         { PCI_FIXUP_FINAL,      PCI_VENDOR_ID_INTEL,
> PCI_DEVICE_ID_INTEL_82443BX_2,  quirk_natoma },
>         { PCI_FIXUP_FINAL,      PCI_VENDOR_ID_SI,
> PCI_DEVICE_ID_SI_5597,          quirk_nopcipci },
>         { PCI_FIXUP_FINAL,      PCI_VENDOR_ID_SI,
> PCI_DEVICE_ID_SI_496,           quirk_nopcipci },
> +       { PCI_FIXUP_FINAL,      PCI_VENDOR_ID_INTEL,
> PCI_DEVICE_ID_INTEL_82371AB_3,  quirk_piix4acpi },
> +       { PCI_FIXUP_FINAL,      PCI_VENDOR_ID_AL,
> PCI_DEVICE_ID_AL_M7101,         quirk_ali7101 },
>         { 0 }
>  };
> 

-- 
Meelis Roos (mroos@linux.ee)

  parent reply	other threads:[~2016-03-12  7:47 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-25  2:11 [PATCH v10 00/59] PCI: Resource allocation cleanup for v4.6 Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 01/59] PCI: Add pci_find_root_bus_resource() Yinghai Lu
2016-03-10  3:54   ` Bjorn Helgaas
2016-03-11 21:21     ` Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 02/59] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2016-03-10 18:24   ` Bjorn Helgaas
2016-03-10 19:47     ` David Miller
2016-03-12  8:22     ` Yinghai Lu
2016-03-12 11:26       ` Bjorn Helgaas
2016-03-19  6:01         ` Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 03/59] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 04/59] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 05/59] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 06/59] PCI: Kill wrong quirk about M7101 Yinghai Lu
2016-03-10 17:40   ` Bjorn Helgaas
2016-03-11 22:08     ` Yinghai Lu
2016-03-12  1:06       ` Linus Torvalds
2016-03-12  7:52       ` Meelis Roos [this message]
2016-03-12  8:26         ` Yinghai Lu
2016-03-12  8:39           ` Meelis Roos
2016-04-25 20:57             ` Bjorn Helgaas
2016-02-25  2:11 ` [PATCH v10 07/59] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge Yinghai Lu
2016-03-10 17:54   ` Bjorn Helgaas
2016-03-11 22:21     ` Yinghai Lu
2016-02-25  2:11 ` [PATCH v10 08/59] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 09/59] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 10/59] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 11/59] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 12/59] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 13/59] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 14/59] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 15/59] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 16/59] PCI: Don't release fixed resource for realloc Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 17/59] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 18/59] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 19/59] PCI: Separate realloc list checking after allocation Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 20/59] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 21/59] PCI: Get new realloc size for bridge for last try Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 22/59] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 23/59] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 24/59] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 25/59] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 26/59] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 27/59] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 28/59] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 29/59] PCI: Reorder resources list for required/optional resources Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 30/59] PCI: Remove duplicated code for resource sorting Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 31/59] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 32/59] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 33/59] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 34/59] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 35/59] PCI: Add __add_to_list() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 36/59] PCI: Cache window alignment value during bus sizing Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 37/59] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 38/59] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 39/59] PCI: Move comment to pci_need_to_release() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 40/59] PCI: Separate required+optional assigning to another function Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 41/59] PCI: Skip required+optional if there is no optional Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 42/59] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 43/59] PCI: Add alt_size ressource allocation support Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 44/59] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 45/59] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 46/59] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 47/59] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 48/59] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 49/59] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 50/59] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 51/59] PCI: Unify skip_ioresource_align() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 52/59] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 53/59] resources: Make allocate_resource() return best fit resource Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 54/59] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 55/59] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 56/59] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 57/59] PCI: Introduce resource_disabled() Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 58/59] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2016-02-25  2:12 ` [PATCH v10 59/59] PCI: Only try to assign io port only for root bus that support it Yinghai Lu
2016-03-10 18:30 ` [PATCH v10 00/59] PCI: Resource allocation cleanup for v4.6 Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LRH.2.20.1603120951320.32556@math.ut.ee \
    --to=mroos@linux.ee \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=helgaas@kernel.org \
    --cc=khalid.aziz@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@iam.tj \
    --cc=torvalds@linux-foundation.org \
    --cc=wangyijing@huawei.com \
    --cc=weiyang@linux.vnet.ibm.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome