mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hugh Dickins <hughd@google.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Konovalov <andreyknvl@google.com>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Hugh Dickins <hughd@google.com>, Michal Hocko <mhocko@suse.cz>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Vladimir Davydov <vdavydov@parallels.com>,
	Jason Low <jason.low2@hp.com>,
	Cesar Eduardo Barros <cesarb@cesarb.net>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Dmitry Vyukov <dvyukov@google.com>,
	Kostya Serebryany <kcc@google.com>,
	Alexander Potapenko <glider@google.com>
Subject: [PATCH] mm: fix potential data race in SyS_swapon
Date: Mon, 17 Aug 2015 17:34:27 -0700 (PDT)	[thread overview]
Message-ID: <alpine.LSU.2.11.1508171729420.3404@eggly.anvils> (raw)
In-Reply-To: <alpine.LSU.2.11.1508171610190.2618@eggly.anvils>

While running KernelThreadSanitizer (ktsan) on upstream kernel with
trinity, we got a few reports from SyS_swapon, here is one of them:

Read of size 8 by thread T307 (K7621):
 [<     inlined    >] SyS_swapon+0x3c0/0x1850 SYSC_swapon mm/swapfile.c:2395
 [<ffffffff812242c0>] SyS_swapon+0x3c0/0x1850 mm/swapfile.c:2345
 [<ffffffff81e97c8a>] ia32_do_call+0x1b/0x25

Looks like the swap_lock should be taken when iterating through the
swap_info array on lines 2392 - 2401: q->swap_file may be reset to
NULL by another thread before it is dereferenced for f_mapping.

But why is that iteration needed at all?  Doesn't the claim_swapfile()
which follows do all that is needed to check for a duplicate entry -
FMODE_EXCL on a bdev, testing IS_SWAPFILE under i_mutex on a regfile?

Well, not quite: bd_may_claim() allows the same "holder" to claim the
bdev again, so we do need to use a different holder than "sys_swapon";
and we should not replace appropriate -EBUSY by inappropriate -EINVAL.

Index i was reused in a cpu loop further down: renamed cpu there.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
---

 mm/swapfile.c |   25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

--- 4.2-rc7/mm/swapfile.c	2015-07-05 19:25:02.852131158 -0700
+++ linux/mm/swapfile.c	2015-08-16 21:30:22.694123923 -0700
@@ -2143,11 +2143,10 @@ static int claim_swapfile(struct swap_in
 	if (S_ISBLK(inode->i_mode)) {
 		p->bdev = bdgrab(I_BDEV(inode));
 		error = blkdev_get(p->bdev,
-				   FMODE_READ | FMODE_WRITE | FMODE_EXCL,
-				   sys_swapon);
+				   FMODE_READ | FMODE_WRITE | FMODE_EXCL, p);
 		if (error < 0) {
 			p->bdev = NULL;
-			return -EINVAL;
+			return error;
 		}
 		p->old_block_size = block_size(p->bdev);
 		error = set_blocksize(p->bdev, PAGE_SIZE);
@@ -2348,7 +2347,6 @@ SYSCALL_DEFINE2(swapon, const char __use
 	struct filename *name;
 	struct file *swap_file = NULL;
 	struct address_space *mapping;
-	int i;
 	int prio;
 	int error;
 	union swap_header *swap_header;
@@ -2388,19 +2386,8 @@ SYSCALL_DEFINE2(swapon, const char __use
 
 	p->swap_file = swap_file;
 	mapping = swap_file->f_mapping;
-
-	for (i = 0; i < nr_swapfiles; i++) {
-		struct swap_info_struct *q = swap_info[i];
-
-		if (q == p || !q->swap_file)
-			continue;
-		if (mapping == q->swap_file->f_mapping) {
-			error = -EBUSY;
-			goto bad_swap;
-		}
-	}
-
 	inode = mapping->host;
+
 	/* If S_ISREG(inode->i_mode) will do mutex_lock(&inode->i_mutex); */
 	error = claim_swapfile(p, inode);
 	if (unlikely(error))
@@ -2433,6 +2420,8 @@ SYSCALL_DEFINE2(swapon, const char __use
 		goto bad_swap;
 	}
 	if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
+		int cpu;
+
 		p->flags |= SWP_SOLIDSTATE;
 		/*
 		 * select a random position to start with to help wear leveling
@@ -2451,9 +2440,9 @@ SYSCALL_DEFINE2(swapon, const char __use
 			error = -ENOMEM;
 			goto bad_swap;
 		}
-		for_each_possible_cpu(i) {
+		for_each_possible_cpu(cpu) {
 			struct percpu_cluster *cluster;
-			cluster = per_cpu_ptr(p->percpu_cluster, i);
+			cluster = per_cpu_ptr(p->percpu_cluster, cpu);
 			cluster_set_null(&cluster->index);
 		}
 	}

      reply	other threads:[~2015-08-18  0:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-07 16:14 Potential " Andrey Konovalov
2015-08-07 23:32 ` Cesar Eduardo Barros
2015-08-17 23:22 ` Hugh Dickins
2015-08-18  0:34   ` Hugh Dickins [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LSU.2.11.1508171729420.3404@eggly.anvils \
    --to=hughd@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=andreyknvl@google.com \
    --cc=cesarb@cesarb.net \
    --cc=dvyukov@google.com \
    --cc=glider@google.com \
    --cc=hannes@cmpxchg.org \
    --cc=jason.low2@hp.com \
    --cc=kcc@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.cz \
    --cc=vdavydov@parallels.com \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®