From: Miroslav Benes <mbenes@suse.cz>
To: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>,
live-patching@vger.kernel.org, linux-kernel@vger.kernel.org,
Jessica Yu <jeyu@kernel.org>, Jiri Kosina <jikos@kernel.org>,
Petr Mladek <pmladek@suse.com>,
Chris J Arges <chris.j.arges@canonical.com>
Subject: Re: [PATCH v5 1/3] livepatch: add (un)patch callbacks
Date: Wed, 13 Sep 2017 09:29:41 +0200 (CEST) [thread overview]
Message-ID: <alpine.LSU.2.21.1709130922260.27762@san.suse.cz> (raw)
In-Reply-To: <20170912222245.bzvwzef27ul77xqm@treble>
On Tue, 12 Sep 2017, Josh Poimboeuf wrote:
> On Tue, Sep 12, 2017 at 06:05:44PM -0400, Joe Lawrence wrote:
> > On Tue, Sep 12, 2017 at 11:48:48AM -0400, Joe Lawrence wrote:
> > > On 09/12/2017 04:53 AM, Miroslav Benes wrote:
> > > >> @@ -871,13 +882,27 @@ int klp_module_coming(struct module *mod)
> > > >> pr_notice("applying patch '%s' to loading module '%s'\n",
> > > >> patch->mod->name, obj->mod->name);
> > > >>
> > > >> + ret = klp_pre_patch_callback(obj);
> > > >> + if (ret) {
> > > >> + pr_warn("pre-patch callback failed for object '%s'\n",
> > > >> + obj->name);
> > > >> + goto err;
> > > >> + }
> > > >
> > > > There is a problem here. We cycle through all enabled patches (or
> > > > klp_transition_patch) and call klp_pre_patch_callback() everytime an
> > > > enabled patch contains a patch for a coming module. Now, it can easily
> > > > happen that klp_pre_patch_callback() fails. And not the first one from the
> > > > first relevant patch, but the next one. In that case we need to call
> > > > klp_post_unpatch_callback() for all already processed relevant patches in
> > > > the error path.
> > >
> > > Good test case, if I understand you correctly:
> > >
> > > - Load target modules mod1 and mod2
> > > - Load a livepatch that targets mod1 and mod2
> > > - pre-patch succeeds for mod1
> > > - pre-patch fails for mod2
> > >
> > > and then we should:
> > >
> > > - NOT run post-patch or pre/post-unpatch handlers for mod2
> > > - NOT run post-patch or pre-unpatch handlers for mod1
> > > - do run post-unpatch handler for mod1
> > > - Refuse to load the livepatch
> > >
> > > Does that sound right?
> >
> > Erm, probably not...
> >
> > > > Unfortunately, we need to do the same for klp_patch_object() below,
> > > > because there is the same problem and we missed it.
> > > >
> > > >> +
> > > >> ret = klp_patch_object(obj);
> > > >> if (ret) {
> > > >> pr_warn("failed to apply patch '%s' to module '%s' (%d)\n",
> > > >> patch->mod->name, obj->mod->name, ret);
> > > >> +
> > > >> + if (patch != klp_transition_patch)
> > > >> + klp_post_unpatch_callback(obj);
> > > >> +
> > > >> goto err;
> > > >
> > > > Here.
> > > >
> > > > Could you do it as a part of the patch set (or send it separately),
> > > > please?
> >
> > I've re-read this a few times, and I think I might have been originally
> > off-base with what I thought you were concerned about. But I think I
> > grok it now: the problem you pointed out arises because
> > klp_module_coming() iterates like so:
> >
> > for each klp_patch
> > for each kobj in klp_patch
> >
> > which means that we may have made pre-patch callbacks and patched a
> > given kobj for an earlier klp_patch that now fails for a later
> > klp_patch.
Yes, that's the scenario.
> > What should be the defined behavior in this case? I would expect that
> > we need to unpatch all similar kobjs across klp_patches which have
> > already been successfully patched. In turn, their post-unpatch
> > callbacks should be invoked.
> >
> > If that's true, maybe this would make a better follow-on patch.
Yes, you'd need to loop back, unpatch everything and call post-unpatch
callbacks too. Probably too much for this patch set, so we can deal with
the problem later.
> The rabbit hole seems to be getting deeper, is it really worth it? I'd
> rather we just make the pre-patch handler return void and be done with
> it, as Joe originally proposed.
>
> So far, allowing the pre-patch handler to halt patching is a purely
> theoretical feature, nobody even knows if we need it yet, and whether
> it's worth the pain. So I'd vote to just simplify this mess and let
> whoever wants the feature try to implement it :-)
Unfortunately, the problem is there even without Joe's callbacks. If it
was only a problem of callbacks, I'd go along with you. I see two options.
1. we'll fix this for klp_patch_object(). Then callbacks' problem would be
simple to solve, because the infrastructure would be already there.
2. we'll remove any error handling from klp_coming_module and we'll allow
target modules to load even with a patching failure. This doesn't seem to
be the right approach...
Miroslav
next prev parent reply other threads:[~2017-09-13 7:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-31 14:53 [PATCH v5 0/3] livepatch callbacks Joe Lawrence
2017-08-31 14:53 ` [PATCH v5 1/3] livepatch: add (un)patch callbacks Joe Lawrence
2017-09-12 8:53 ` Miroslav Benes
2017-09-12 15:48 ` Joe Lawrence
2017-09-12 22:05 ` Joe Lawrence
2017-09-12 22:22 ` Josh Poimboeuf
2017-09-13 7:29 ` Miroslav Benes [this message]
2017-09-13 13:53 ` Joe Lawrence
2017-09-13 21:36 ` [RFC] livepatch: unpatch all klp_objects if klp_module_coming fails Joe Lawrence
2017-09-20 11:19 ` Miroslav Benes
2017-09-20 15:17 ` Joe Lawrence
2017-09-27 12:17 ` Petr Mladek
2017-09-13 7:22 ` [PATCH v5 1/3] livepatch: add (un)patch callbacks Miroslav Benes
2017-09-26 14:49 ` Petr Mladek
2017-09-26 19:01 ` Joe Lawrence
2017-09-27 8:02 ` Petr Mladek
2017-08-31 14:53 ` [PATCH v5 2/3] livepatch: move transition "complete" notice into klp_complete_transition() Joe Lawrence
2017-09-12 9:09 ` Miroslav Benes
2017-09-27 11:35 ` Petr Mladek
2017-08-31 14:53 ` [PATCH v5 3/3] livepatch: add transition notices Joe Lawrence
2017-09-12 9:29 ` Miroslav Benes
2017-09-27 11:49 ` Petr Mladek
2017-09-27 15:45 ` Joe Lawrence
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LSU.2.21.1709130922260.27762@san.suse.cz \
--to=mbenes@suse.cz \
--cc=chris.j.arges@canonical.com \
--cc=jeyu@kernel.org \
--cc=jikos@kernel.org \
--cc=joe.lawrence@redhat.com \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=live-patching@vger.kernel.org \
--cc=pmladek@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®