From: "José Expósito" <jose.exposito89@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org, maarten.lankhorst@linux.intel.com,
mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
simona@ffwll.ch, boris.brezillon@collabora.com, kees@kernel.org,
"José Expósito" <jose.exposito@redhat.com>
Subject: Re: [PATCH v3] drm/tests: shmem: Set DMA mask to 64-bit in drm_gem_shmem
Date: Thu, 23 Jul 2026 11:51:03 +0200 [thread overview]
Message-ID: <amHkBwhcNaUPQqd7@fedora> (raw)
In-Reply-To: <20260703150808.3832-1-jose.exposito89@gmail.com>
On Fri, Jul 03, 2026 at 05:07:43PM +0200, José Expósito wrote:
> From: José Expósito <jose.exposito@redhat.com>
>
> drm_gem_shmem_test_purge [1] and drm_gem_shmem_test_get_pages_sgt [2]
> intermittently fail on ppc64le and s390x CI systems with a DMA address
> overflow:
>
> DMA addr 0x0000000100307000+4096 overflow (mask ffffffff, bus limit 0)
> WARNING: kernel/dma/direct.h:114 dma_direct_map_sg+0x778/0x920
>
> drm_gem_shmem_test_purge: ASSERTION FAILED at
> drivers/gpu/drm/tests/drm_gem_shmem_test.c:330
> Expected sgt is not error, but is: -5
>
> The call chain leading to the failure is:
>
> drm_gem_shmem_test_purge() / drm_gem_shmem_test_get_pages_sgt()
> drm_gem_shmem_get_pages_sgt()
> drm_gem_shmem_get_pages_sgt_locked() [drm_gem_shmem_helper.c]
> dma_map_sgtable() [mapping.c]
> __dma_map_sg_attrs()
> dma_direct_map_sg() [direct.c]
> dma_direct_map_phys() [kernel/dma/direct.h]
> dma_capable() Checks addr against DMA mask
> -> FAILS: addr > 0xFFFFFFFF
>
> The root cause is that KUnit devices are initialized with a 32-bit DMA
> mask (DMA_BIT_MASK(32)) in lib/kunit/device.c. On ppc64le and s390x
> systems with physical memory above 4GB, page allocations can land at
> addresses that exceed this mask. When drm_gem_shmem_get_pages_sgt()
> attempts to DMA-map these pages via dma_map_sgtable(), the DMA layer
> rejects the mapping because the physical address overflows the 32-bit
> mask.
>
> The failure is intermittent because pages may or may not be allocated
> above 4GB on any given run depend on memory pressure.
>
> Fix by setting a 64-bit DMA mask on the device before calling
> drm_gem_shmem_get_pages_sgt() for all tests, following the same pattern
> already used in drm_gem_shmem_test_obj_create_private().
>
> [1] https://s3.amazonaws.com/arr-cki-prod-trusted-artifacts/trusted-artifacts/2643976103/test_s390x/15128551935/artifacts/jobwatch/logs/recipes/21561049/tasks/220716793/results/1014626315/logs/dmesg.log
> [2] https://s3.amazonaws.com/arr-cki-prod-trusted-artifacts/trusted-artifacts/2643976103/test_ppc64le/15128551933/artifacts/jobwatch/logs/recipes/21561041/tasks/220716705/results/1014628163/logs/dmesg.log
>
> Fixes: 93032ae634d4 ("drm/test: add a test suite for GEM objects backed by shmem")
> Closes: https://datawarehouse.cki-project.org/issue/5345
> Closes: https://datawarehouse.cki-project.org/issue/3184
> Assisted-by: Claude:claude-4.6-opus
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> Signed-off-by: José Expósito <jose.exposito@redhat.com>
Applied to drm-misc-fixes, thanks a lot for your review Thomas.
Jose
> ---
>
> v2:
>
> - Move fix to drm_gem_shmem_test_init() (Thomas Zimmermann)
> - Link to v1: https://lore.kernel.org/dri-devel/20260703063517.6346-1-jose.exposito89@gmail.com/
>
> v3:
>
> - Improve comments (Sashiko Bot)
> - Link to v2: https://lore.kernel.org/dri-devel/20260703142749.4099-1-jose.exposito89@gmail.com/
> ---
> drivers/gpu/drm/tests/drm_gem_shmem_test.c | 16 ++++++++++------
> 1 file changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/tests/drm_gem_shmem_test.c b/drivers/gpu/drm/tests/drm_gem_shmem_test.c
> index 44a190109249..5e69ff1d1ad6 100644
> --- a/drivers/gpu/drm/tests/drm_gem_shmem_test.c
> +++ b/drivers/gpu/drm/tests/drm_gem_shmem_test.c
> @@ -95,13 +95,9 @@ static void drm_gem_shmem_test_obj_create_private(struct kunit *test)
> sg_init_one(sgt->sgl, buf, TEST_SIZE);
>
> /*
> - * Set the DMA mask to 64-bits and map the sgtables
> - * otherwise drm_gem_shmem_free will cause a warning
> - * on debug kernels.
> + * Map the sgtables otherwise drm_gem_shmem_free will cause a warning on
> + * debug kernels.
> */
> - ret = dma_set_mask(drm_dev->dev, DMA_BIT_MASK(64));
> - KUNIT_ASSERT_EQ(test, ret, 0);
> -
> ret = dma_map_sgtable(drm_dev->dev, sgt, DMA_BIDIRECTIONAL, 0);
> KUNIT_ASSERT_EQ(test, ret, 0);
>
> @@ -352,11 +348,19 @@ static int drm_gem_shmem_test_init(struct kunit *test)
> {
> struct device *dev;
> struct drm_device *drm_dev;
> + int ret;
>
> /* Allocate a parent device */
> dev = drm_kunit_helper_alloc_device(test);
> KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
>
> + /*
> + * Set the DMA mask to 64-bits to avoid intermittent failures calling
> + * drm_gem_shmem_get_pages_sgt().
> + */
> + ret = dma_set_mask(dev, DMA_BIT_MASK(64));
> + KUNIT_ASSERT_EQ(test, ret, 0);
> +
> /*
> * The DRM core will automatically initialize the GEM core and create
> * a DRM Memory Manager object which provides an address space pool
> --
> 2.54.0
>
prev parent reply other threads:[~2026-07-23 9:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-03 15:07 José Expósito
2026-07-23 9:51 ` José Expósito [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amHkBwhcNaUPQqd7@fedora \
--to=jose.exposito89@gmail.com \
--cc=airlied@gmail.com \
--cc=boris.brezillon@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jose.exposito@redhat.com \
--cc=kees@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®