From: Frank Li <Frank.li@oss.nxp.com>
To: han.xu@oss.nxp.com
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
imx@lists.linux.dev, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org, Han Xu <han.xu@nxp.com>
Subject: Re: [PATCH v2] mtd: rawnand: gpmi: add debugfs entry for BCH geometry
Date: Wed, 29 Jul 2026 15:40:44 -0500 [thread overview]
Message-ID: <amplTATeFqpGx7qe@SMW015318> (raw)
In-Reply-To: <20260729-nand_debugfs-v2-1-2631e92adcb2@nxp.com>
On Wed, Jul 29, 2026 at 02:22:20PM -0500, han.xu@oss.nxp.com wrote:
> From: Han Xu <han.xu@nxp.com>
>
> Export the BCH geometry parameters via debugfs to aid debugging and
> provide the necessary information for legacy kobs-ng tool. The debugfs
> directory "gpmi-nand" is created under the root debugfs tree, exposing:
>
> bch_geometry - blob containing the struct bch_geometry fields
> raw_mode - flag indicating raw mode status
>
> The implementation is guarded with #ifdef CONFIG_DEBUG_FS to avoid
> build failures when debugfs is disabled.
>
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
> Changes in v2:
> - Move dbg_root and dbg_bch_geo into struct gpmi_nand_data to fix
> use-after-free on device unbind.
> - Replace debugfs_create_file_full() with debugfs_create_bool() to
> expose the raw_mode flag.
> - Register a devm cleanup action to call debugfs_remove_recursive() on
> driver removal.
>
> To: Han Xu <han.xu@nxp.com>
> To: Miquel Raynal <miquel.raynal@bootlin.com>
> To: Richard Weinberger <richard@nod.at>
> To: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: imx@lists.linux.dev
> Cc: linux-mtd@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 29 +++++++++++++++++++++++++++++
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 6 ++++++
> 2 files changed, 35 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> index c1f766cb225aa..527165ccc839d 100644
> --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> @@ -7,6 +7,7 @@
> */
> #include <linux/cleanup.h>
> #include <linux/clk.h>
> +#include <linux/debugfs.h>
bch_remove_debugfs> #include <linux/delay.h>
> #include <linux/slab.h>
> #include <linux/sched/task_stack.h>
> @@ -732,6 +733,31 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
> return err;
> }
>
> +#ifdef CONFIG_DEBUG_FS
> +static void bch_remove_debugfs(void *data)
> +{
> + struct gpmi_nand_data *this = data;
> +
> + debugfs_remove_recursive(this->dbg_root);
> + this->dbg_root = NULL;
> +}
> +
> +static void bch_create_debugfs(struct gpmi_nand_data *this)
> +{
> + struct bch_geometry *bch_geo = &this->bch_geometry;
> +
> + this->dbg_root = debugfs_create_dir("gpmi-nand", NULL);
> + this->dbg_bch_geo.data = (void *)bch_geo;
> + this->dbg_bch_geo.size = sizeof(struct bch_geometry);
> + this->raw_mode = true;
> + debugfs_create_blob("bch_geometry", 0444, this->dbg_root, &this->dbg_bch_geo);
> + debugfs_create_bool("raw_mode", 0444, this->dbg_root, &this->raw_mode);
> + devm_add_action_or_reset(this->dev, bch_remove_debugfs, this);
> +}
> +#else
> +static void bch_create_debugfs(struct gpmi_nand_data *this) {}
> +#endif /* CONFIG_DEBUG_FS */
> +
> /* Configures the geometry for BCH. */
> static int bch_set_geometry(struct gpmi_nand_data *this)
> {
> @@ -2282,6 +2308,9 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
> if (ret)
> return ret;
>
> + /* save BCH geometry to debugfs if CONFIG_DEBUG_FS is enabled */
> + bch_create_debugfs(this);
> +
> /* Init the nand_ecc_ctrl{} */
> ecc->read_page = gpmi_ecc_read_page;
> ecc->write_page = gpmi_ecc_write_page;
> diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
> index 3e9bc985e44a3..80c32efbaef86 100644
> --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h
> @@ -161,6 +161,12 @@ struct gpmi_nand_data {
> #define DMA_CHANS 8
> struct dma_chan *dma_chans[DMA_CHANS];
> struct completion dma_done;
> +
> +#ifdef CONFIG_DEBUG_FS
> + struct dentry *dbg_root;
> + struct debugfs_blob_wrapper dbg_bch_geo;
> + bool raw_mode;
> +#endif
> };
>
> /* BCH : Status Block Completion Codes */
>
> ---
> base-commit: f97bdc8ec1dc7b33781a702eeba55326c206be56
> change-id: 20260727-nand_debugfs-74d6d6ba52df
>
> Best regards,
> --
> Han Xu <han.xu@nxp.com>
>
>
next prev parent reply other threads:[~2026-07-29 20:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 19:22 han.xu
2026-07-29 20:40 ` Frank Li [this message]
2026-08-07 14:00 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amplTATeFqpGx7qe@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=han.xu@nxp.com \
--cc=han.xu@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®