From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
To: Biju <biju.das.au@gmail.com>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
dri-devel@lists.freedesktop.org,
linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v2 02/16] drm: renesas: rzg2l_mipi_dsi: Add dphyctrl0_init_val to hw_info
Date: Wed, 5 Aug 2026 17:00:51 +0200 [thread overview]
Message-ID: <anNQI9ZYDBrVgFex@tom-desktop> (raw)
In-Reply-To: <20260729125516.230757-3-biju.das.jz@bp.renesas.com>
On Wed, Jul 29, 2026 at 01:54:54PM +0100, Biju wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
>
> Move the DSIDPHYCTRL0 initialization value into the hw_info structure as
> dphyctrl0_init_val, allowing SoC-specific D-PHY control register
> initialization to be defined per compatible. This prepares the driver for
> supporting SoCs that require a different initial DSIDPHYCTRL0 value.
>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Kind regards,
Tommaso
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v1->v2:
> * No change.
> ---
> drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> index 0590ade96b91..2128fd16ebc9 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_mipi_dsi.c
> @@ -56,6 +56,7 @@ struct rzg2l_mipi_dsi_hw_info {
> } cpg_plldsi;
> u32 phy_reg_offset;
> u32 link_reg_offset;
> + u32 dphyctrl0_init_val;
> unsigned long min_dclk;
> unsigned long max_dclk;
> u8 features;
> @@ -493,9 +494,7 @@ static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
> }
>
> /* Initializing DPHY before accessing LINK */
> - dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
> - DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR;
> -
> + dphyctrl0 = dsi->info->dphyctrl0_init_val;
> rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
> usleep_range(20, 30);
>
> @@ -1531,6 +1530,8 @@ static const struct rzg2l_mipi_dsi_hw_info rzg2l_mipi_dsi_info = {
> .dphy_exit = rzg2l_mipi_dsi_dphy_exit,
> .dphy_conf_clks = rzg2l_dphy_conf_clks,
> .link_reg_offset = 0x10000,
> + .dphyctrl0_init_val = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
> + DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR,
> .min_dclk = 5803,
> .max_dclk = 148500,
> };
> --
> 2.43.0
>
next prev parent reply other threads:[~2026-08-05 15:01 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 12:54 [PATCH v2 00/16] Add support for DU, LVDS and DSI on the Renesas RZ/G3L SoC Biju
2026-07-29 12:54 ` [PATCH v2 01/16] dt-bindings: display: bridge: renesas,dsi: Document RZ/G3L Biju
2026-08-03 8:34 ` Krzysztof Kozlowski
2026-08-03 8:36 ` Biju Das
2026-08-05 13:17 ` Biju Das
2026-07-29 12:54 ` [PATCH v2 02/16] drm: renesas: rzg2l_mipi_dsi: Add dphyctrl0_init_val to hw_info Biju
2026-08-05 15:00 ` Tommaso Merciai [this message]
2026-07-29 12:54 ` [PATCH v2 03/16] drm: renesas: rzg2l_mipi_dsi: Add activation_dly " Biju
2026-08-05 15:02 ` Tommaso Merciai
2026-07-29 12:54 ` [PATCH v2 04/16] drm: renesas: rzg2l_mipi_dsi: Move global timings into hardware info struct Biju
2026-08-05 15:29 ` Tommaso Merciai
2026-08-05 16:31 ` Biju Das
2026-07-29 12:54 ` [PATCH v2 05/16] drm: renesas: rzg2l_mipi_dsi: Add support for DSI PWRRDY Biju
2026-07-29 12:54 ` [PATCH v2 06/16] drm: renesas: rzg2l_mipi_dsi: Add RZ/G3L MIPI DSI support Biju
2026-07-29 12:54 ` [PATCH v2 07/16] dt-bindings: display: renesas,rzg2l-du: Document RZ/G3L SoC Biju
2026-08-03 8:34 ` Krzysztof Kozlowski
2026-08-05 13:18 ` Biju Das
2026-07-29 12:55 ` [PATCH v2 08/16] drm: renesas: rz-du: Add RZ/G3L (R9A08G046) DU support Biju
2026-08-05 14:55 ` Tommaso Merciai
2026-08-05 16:19 ` Biju Das
2026-07-29 12:55 ` [PATCH v2 09/16] dt-bindings: display: bridge: Document Renesas RZ/G3L LVDS encoder Biju
2026-08-05 13:19 ` Biju Das
2026-07-29 12:55 ` [PATCH v2 10/16] drm: renesas: rz-du: Add support for " Biju
2026-07-29 12:55 ` [PATCH v2 11/16] arm64: dts: renesas: r9a08g046: Add fcpvd node Biju
2026-08-05 16:12 ` Tommaso Merciai
2026-07-29 12:55 ` [PATCH v2 12/16] arm64: dts: renesas: r9a08g046: Add vspd node Biju
2026-08-05 16:14 ` Tommaso Merciai
2026-07-29 12:55 ` [PATCH v2 13/16] arm64: dts: renesas: r9a08g046: Add DU and DSI nodes Biju
2026-07-29 12:55 ` [PATCH v2 14/16] arm64: dts: renesas: r9a08g046: Add LVDS node Biju
2026-07-29 12:55 ` [PATCH v2 15/16] arm64: dts: renesas: Add DSI overlay for RZ/G3L SMARC EVK with ADV7535 Biju
2026-07-29 12:55 ` [PATCH v2 16/16] arm64: dts: renesas: Add LVDS overlay for RZ/G3L SMARC EVK with ITE6263 Biju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anNQI9ZYDBrVgFex@tom-desktop \
--to=tommaso.merciai.xr@bp.renesas.com \
--cc=airlied@gmail.com \
--cc=biju.das.au@gmail.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®