From: Hyunwoo Kim <imv4bel@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: david@kernel.org, ljs@kernel.org, liam@infradead.org,
vbabka@kernel.org, rppt@kernel.org, surenb@google.com,
mhocko@suse.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Max Boone <mboone@akamai.com>,
imv4bel@gmail.com
Subject: Re: [PATCH v2 1/2] mm/pagewalk: fix stale walk->action escaping walk_pmd_range()
Date: Wed, 12 Aug 2026 05:17:36 +0900 [thread overview]
Message-ID: <anuDYOPa0kTD9bul@v4bel> (raw)
In-Reply-To: <20260811123702.f3c60a3573e148c53ad35b97@linux-foundation.org>
On Tue, Aug 11, 2026 at 12:37:02PM -0700, Andrew Morton wrote:
> On Wed, 12 Aug 2026 01:18:57 +0900 Hyunwoo Kim <imv4bel@gmail.com> wrote:
>
> > If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none()
> > check is retried. The PMD entry may be cleared at the point of retry.
> >
> > In this case, if walk->ops->install_pte is not specified, the code
> > continues to the next PMD entry in the range without resetting
> > walk->action to ACTION_SUBTREE.
> >
> > This leaves walk->action erroneously set to ACTION_AGAIN, which is
> > incorrect.
> >
> > This was incorrect but not problematic up until commit 3b89863c3fa4
> > ("mm/pagewalk: fix race between concurrent split and refault")
> > which updated walk_pud_range() to check for walk->action ==
> > ACTION_AGAIN upon walk_pmd_range()'s return, causing the PUD walk
> > to be retried.
> >
> > In this case this results in duplicate walk callbacks being
> > invoked, which is erroneous and will break any caller that is not
> > idempotent with respect to this (and waste time for those which
> > are).
>
> "break". Please describe the breakage completely. It's really the
> most important information in the whole effort.
>
> IOW, when fixing a bug please describe the userspace-visible runtime
> effects of that bug.
>
> eg, what were the results of the fuzzer?
To be precise, this is an out-of-bounds write.
> Is there a Link:?
This came from a local fuzzer, so there is no Link:
> A stack trace?
[ 2.272695] ==================================================================
[ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190
[ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106
[ 2.274966]
[ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy)
[ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.275164] Call Trace:
[ 2.275170] <TASK>
[ 2.275172] dump_stack_lvl+0x53/0x70
[ 2.275200] print_report+0xd0/0x630
[ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.275219] ? irqentry_exit+0xd2/0x670
[ 2.275224] ? irqentry_exit+0xd2/0x670
[ 2.275226] ? __virt_addr_valid+0xef/0x1a0
[ 2.275239] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275242] kasan_report+0xce/0x100
[ 2.275245] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275248] __mincore_unmapped_range+0x14f/0x190
[ 2.275252] mincore_unmapped_range+0x45/0x70
[ 2.275254] walk_pgd_range+0xafc/0xfc0
[ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10
[ 2.275264] ? __update_load_avg_se+0x3d1/0x670
[ 2.275275] __walk_page_range+0xc0/0x310
[ 2.275278] ? __pfx_find_vma+0x10/0x10
[ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0
[ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0
[ 2.275293] ? __pfx_mtree_load+0x10/0x10
[ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10
[ 2.275302] ? __free_frozen_pages+0x54d/0x7e0
[ 2.275308] __do_sys_mincore+0x132/0x380
[ 2.275311] do_syscall_64+0xf9/0x540
[ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.275322] RIP: 0033:0x422ccd
[ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b
[ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd
[ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000
[ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100
[ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf
[ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001
[ 2.275346] </TASK>
[ 2.275347]
[ 2.296904] The buggy address belongs to the object at ffff888008d9b000
[ 2.296904] which belongs to the cache sigqueue of size 80
[ 2.298151] The buggy address is located 0 bytes inside of
[ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050)
[ 2.299408]
[ 2.299601] The buggy address belongs to the physical page:
[ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b
[ 2.301001] flags: 0x100000000000000(node=0|zone=1)
[ 2.301535] page_type: f5(slab)
[ 2.301884] raw: 0100000000000000 ffff888107e46780 dead000000000122 0000000000000000
[ 2.302687] raw: 0000000000000000 0000000800240024 00000000f5000000 0000000000000000
[ 2.303489] page dumped because: kasan: bad access detected
[ 2.304092]
[ 2.304276] Memory state around the buggy address:
[ 2.304801] ffff888008d9af00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2.305567] ffff888008d9af80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 2.306340] >ffff888008d9b000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2.307115] ^
[ 2.307474] ffff888008d9b080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2.308237] ffff888008d9b100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 2.308997] ==================================================================
>
> > A specific example of this breaking things is mincore which walks
> > an internal cursor data structure a byte at a time on assumption
> > that page table entry callbacks are called only once for each
> > entry.
> >
> > Fix the problem by resetting walk->action to ACTION_SUBTREE prior
> > to the none check.
> >
> > The pattern also exists in walk_pud_range() so fix it there too.
> >
> > This issue was found through AI-based fuzzing.
> >
> > Fixes: 3b89863c3fa4 ("mm/pagewalk: fix race between concurrent split and refault")
>
> It's good to cc the relevant Author(s).
>
> > Cc: stable@vger.kernel.org
>
> We really should tell -stable maintainers (and all other users of
> earlier kernels) all about the above things.
>
> > mm/pagewalk.c | 6 ++----
> > 1 file changed, 2 insertions(+), 4 deletions(-)
>
> This depends on the above info, but I'd prefer to process the bugfix
> promptly and defer consideration of the selftest until the next -rc
> cycle.
Should I send a v3 with the changelog fixed? (in 24 hours, I guess?)
Best regards,
Hyunwoo Kim
next prev parent reply other threads:[~2026-08-11 20:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 16:18 [PATCH v2 0/2] " Hyunwoo Kim
2026-08-11 16:18 ` [PATCH v2 1/2] " Hyunwoo Kim
2026-08-11 16:23 ` Lorenzo Stoakes (ARM)
2026-08-11 17:10 ` David Hildenbrand (Arm)
2026-08-11 19:37 ` Andrew Morton
2026-08-11 20:17 ` Hyunwoo Kim [this message]
2026-08-11 21:57 ` Andrew Morton
2026-08-11 16:18 ` [PATCH v2 2/2] selftests/mm: add stale walk->action race test Hyunwoo Kim
2026-08-11 16:33 ` Lorenzo Stoakes (ARM)
2026-08-11 17:11 ` David Hildenbrand (Arm)
2026-08-11 18:23 ` Lorenzo Stoakes (ARM)
2026-08-11 18:49 ` David Hildenbrand (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anuDYOPa0kTD9bul@v4bel \
--to=imv4bel@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=david@kernel.org \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mboone@akamai.com \
--cc=mhocko@suse.com \
--cc=rppt@kernel.org \
--cc=stable@vger.kernel.org \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®