From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [GIT PULL] TTY/Serial driver updates for 7.3-rc1
Date: Tue, 25 Aug 2026 16:27:54 +0200 [thread overview]
Message-ID: <ao2masQJ22TNPd12@kroah.com> (raw)
The following changes since commit f5098b6bae761e346ebcd9da7f95622c04733cff:
Linux 7.2-rc5 (2026-07-26 14:45:48 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-7.3-rc1
for you to fetch changes up to 8b0b29fdcb47907ae0296b8fe829e918e05e300f:
serial: imx: serialize imx_uart_ports[] lifetime (2026-08-03 16:54:10 +0200)
----------------------------------------------------------------
TTY / Serial driver updates for 7.3-rc1
Here is the "big" set of tty and serial driver updates for 7.3-rc1. Not
really all that much happened this development cycle for this subsystem,
changes in here are:
- removal of the ipwireless driver as it's no longer used or needed
- new 8250_mxpcie driver added
- qcom serial driver updates and additions
- vt mode validation addition
- lots of other small serial driver updates and additions
All of these have been in linux-next for weeks with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Andy Shevchenko (1):
serdev: acpi: Free resource list at appropriate time
Aniket Randive (1):
serial: qcom_geni: Disable closing_wait for console to prevent shutdown timeout
Arnd Bergmann (1):
serial: 8250: handle ixp4xx register endianness correctly
Bartosz Golaszewski (1):
serial: 8250_exar: use platform_device_register_full()
Bjorn Andersson (2):
serial: qcom-geni: Convert console to nbcon
serial: qcom-geni: Keep FIFO RX active during console TX
Carlo Caione (2):
arm64: dts: mediatek: alias all enabled serial ports
serial: 8250_mtk: honor DT serial aliases
Crescent Hsieh (14):
serial: 8250: split Moxa PCIe serial board support out of 8250_pci
serial: 8250: add Moxa MUEx50 UART port type
serial: 8250_mxpcie: enable enhanced mode and program FIFO trigger levels
serial: 8250_mxpcie: enable automatic RTS/CTS flow control
serial: 8250_mxpcie: offload XON/XOFF flow control to MUEx50 hardware
serial: 8250_mxpcie: add custom handle_irq callback
serial: 8250_mxpcie: speed up RX using memory-mapped FIFO window
serial: 8250_mxpcie: speed up TX using memory-mapped FIFO window
serial: 8250_mxpcie: support serial interface mode switching
serial: 8250: allow low-level drivers to override break control
serial: 8250_mxpcie: add break support for RS485 using MUEx50 features
serial: 8250: allow UART drivers to override rx_trig_bytes handling
serial: 8250_mxpcie: introduce per-port private data structure
serial: 8250_mxpcie: implement rx_trig_bytes callbacks via MUEx50 RTL
David Laight (1):
drivers/tty/serial/kgdboc: Use strscpy() to copy strings into arrays
Douglas Anderson (1):
dt-bindings: serial: snps-dw-apb-uart: Add "google,lga-uart"
Fushuai Wang (2):
serial: 8250: Clear CON_PRINTBUFFER on port re-registration
Revert "serial: 8250: Clear CON_PRINTBUFFER on port re-registration"
Greg Kroah-Hartman (3):
Merge 7.2-rc3 into tty-next
Revert "serial: qcom-geni: remove .pm callback, use runtime PM in startup/shutdown"
Merge 7.2-rc5 into tty-next
Guangshuo Li (1):
serial: qcom-geni: do not advance stale DMA completions
Haoxiang Li (1):
tty: serial: pch_uart: add check for pci_get_slot()
Hugo Villeneuve (17):
serial: 8250_hub6: add hub6_match_port()
serial: core: add uart_iotype_mmio/io helper functions
serial: core: use uart_iotype_*() to simplify uart_match_port()
serial: uniformize serial port I/O infos display
serial: 8250: use uart_iotype_*() to simplify code
serial: 8250_rsa: use uart_iotype_*() to simplify code
serial: core: add new I/O type for SPI and I2C bus devices
serial: sc16is7xx: use new UPIO_BUS as iotype
serial: max310x: use new UPIO_BUS as iotype
serial: max3100: use new UPIO_BUS as iotype
serial: 8250_hub6: add missing include for hub6_match_port()
serial: 8250: fix compile error with hub6_match_port() when compiled as a module
serial: core: display 32 for MEM32 and MEM32BE UPIO types
serial: max310x: remove always included kconfig.h
serial: 8250: remove always included kconfig.h
serial: rsci: remove check for zero baud rate from uart_get_baud_rate()
serial: sh-sci: remove check for zero baud rate from uart_get_baud_rate()
Jiri Slaby (SUSE) (4):
goldfish: remove unused gf_write_dma_addr()
tty: goldfish: drop unused goldfish_tty::opencount
tty: goldfish: move gf_write_ptr() to tty/goldfish.c
tty: goldfish: use guard() for locks
John Ogness (2):
serial: 8250: Switch to nbcon console, take 2
Revert "serial: 8250: drop lockdep annotation from serial8250_clear_IER()"
John de la Garza (2):
tty: tty_jobctrl: use guard()s in tiocspgrp()
tty: tty_jobctrl: use guard() in tiocgsid()
Karl Mehltretter (8):
tty: hvc: restrict HVC_DCC to ARMv6+ and ARM64
serial: amba-pl011: unprepare console clock on unregister
serial: amba-pl011: keep console clock enabled for atomic writes
serial: core: do fallible allocations before the console can be registered
serial: core: clear freed pointers on uart_register_driver() failure
tty: skip cdev_del() when no cdev is registered
tty: clear cdev pointer after cdev_add() failure
serial: imx: serialize imx_uart_ports[] lifetime
Mike Rapoport (Microsoft) (4):
serial: pch: replace __get_free_page() with kmalloc()
tty: amiserial: replace get_zeroed_page() with kzalloc()
tty: serial: men_z135_uart: replace __get_free_page() with kmalloc()
vc_screen: replace __get_free_pages() with kmalloc()
Pan Chuang (5):
serial: 8250_bcm7271: Remove redundant dev_err_probe()
serial: imx: Remove redundant dev_err()
serial: mvebu-uart: Remove redundant dev_err()
serial: mctrl_gpio: Remove redundant dev_err()
serial: sprd: Remove redundant dev_err()
Pei Xiao (1):
serial: bcm63xx-uart: silence false positive coccinelle warning on clk_put
Praveen Talari (11):
serial: qcom-geni: trace: Drop redundant len field from geni_serial_data
serial: qcom-geni: Pre-map RX DMA buffer at probe to avoid sleep-in-atomic
serial: qcom-geni: add force suspend/resume to system sleep callbacks
serial: qcom-geni: remove .pm callback, use runtime PM in startup/shutdown
serial: qcom-geni: Add tracepoints for Qualcomm GENI serial driver
serial: qcom_geni: Add shutdown callback to quiesce hardware on reboot
serial: qcom_geni: Add panic notifier to stop UART on panic
serial: qcom-geni: remove .pm callback, use runtime PM in startup/shutdown
serial: qcom-geni: Use common GENI resource initialisation helpers
serial: qcom-geni: Use resources helper APIs in runtime PM functions
serial: qcom-geni: Use geni_se_set_perf_level() for baud rate perf level
Qingfang Deng (1):
tty: remove the ipwireless driver
Rahul Bukte (1):
serial: 8250: force synchronous probe for the ISA and PNP drivers
Rosen Penev (2):
tty: serial: mpc52xx_uart: add bounds check for psc_num array index
serial: cpm_uart: replace irq_of_parse_and_map with platform_get_irq
Simon Glass (1):
dt-bindings: serial: snps-dw-apb-uart: Add RV1106 compatible
Tapio Reijonen (3):
serial: max310x: register GPIO controller before adding UART ports
dt-bindings: serial: maxim,max310x: describe per-channel rs485 subnodes
serial: max310x: honour rs485 properties from per-channel DT subnode
Uwe Kleine-König (The Capable Hub) (3):
serial: 8250_exar: Consistently define pci_device_ids using named initializers
tty: serial: rp2: Use named initializer for pci_device_id::driver_data
serial: 8250_pnp: Use named initializers for pnp_device_id array
Wang Zihan (1):
vt: add mode validation in vt_setactivate
Yu-Che Hsieh (1):
dt-bindings: serial: 8250: Add Aspeed AST2600 and AST2700 uart compatible
Yuho Choi (1):
serial: ma35d1: Fix OF node reference leaks in console init
Documentation/devicetree/bindings/serial/8250.yaml | 8 +-
.../devicetree/bindings/serial/maxim,max310x.yaml | 92 +-
.../bindings/serial/snps-dw-apb-uart.yaml | 2 +
MAINTAINERS | 6 -
.../boot/dts/mediatek/mt6795-sony-xperia-m5.dts | 1 +
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 +
.../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 +
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 2 +
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
.../boot/dts/mediatek/mt8192-asurada-hayato-r1.dts | 4 +
arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 2 +
.../boot/dts/mediatek/mt8390-genio-common.dtsi | 2 +
.../boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi | 2 +
.../boot/dts/mediatek/mt8390-tungsten-smarc.dtsi | 2 +
.../boot/dts/mediatek/mt8395-genio-common.dtsi | 1 +
arch/powerpc/configs/ppc6xx_defconfig | 1 -
drivers/tty/Kconfig | 9 -
drivers/tty/Makefile | 2 -
drivers/tty/amiserial.c | 14 +-
drivers/tty/goldfish.c | 23 +-
drivers/tty/hvc/Kconfig | 2 +-
drivers/tty/ipwireless/Makefile | 9 -
drivers/tty/ipwireless/hardware.c | 1770 --------------------
drivers/tty/ipwireless/hardware.h | 63 -
drivers/tty/ipwireless/main.c | 356 ----
drivers/tty/ipwireless/main.h | 66 -
drivers/tty/ipwireless/network.c | 517 ------
drivers/tty/ipwireless/network.h | 54 -
drivers/tty/ipwireless/setup_protocol.h | 109 --
drivers/tty/ipwireless/tty.c | 627 -------
drivers/tty/ipwireless/tty.h | 46 -
drivers/tty/serdev/core.c | 4 +-
drivers/tty/serial/8250/8250.h | 11 +-
drivers/tty/serial/8250/8250_bcm7271.c | 4 +-
drivers/tty/serial/8250/8250_core.c | 71 +-
drivers/tty/serial/8250/8250_dw.c | 2 +-
drivers/tty/serial/8250/8250_early.c | 19 +-
drivers/tty/serial/8250/8250_exar.c | 53 +-
drivers/tty/serial/8250/8250_hub6.c | 8 +
drivers/tty/serial/8250/8250_mtk.c | 7 +-
drivers/tty/serial/8250/8250_mxpcie.c | 627 +++++++
drivers/tty/serial/8250/8250_of.c | 12 +
drivers/tty/serial/8250/8250_pci.c | 245 +--
drivers/tty/serial/8250/8250_platform.c | 1 +
drivers/tty/serial/8250/8250_pnp.c | 309 ++--
drivers/tty/serial/8250/8250_port.c | 321 +++-
drivers/tty/serial/8250/8250_rsa.c | 40 +-
drivers/tty/serial/8250/Kconfig | 10 +
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/amba-pl011.c | 48 +-
drivers/tty/serial/bcm63xx_uart.c | 11 +-
drivers/tty/serial/cpm_uart.c | 9 +-
drivers/tty/serial/earlycon.c | 17 +-
drivers/tty/serial/imx.c | 39 +-
drivers/tty/serial/kgdboc.c | 2 +-
drivers/tty/serial/ma35d1_serial.c | 12 +-
drivers/tty/serial/max3100.c | 1 +
drivers/tty/serial/max310x.c | 101 +-
drivers/tty/serial/men_z135_uart.c | 7 +-
drivers/tty/serial/mpc52xx_uart.c | 8 +
drivers/tty/serial/mvebu-uart.c | 12 +-
drivers/tty/serial/pch_uart.c | 11 +-
drivers/tty/serial/qcom_geni_serial.c | 660 +++++---
drivers/tty/serial/rp2.c | 2 +-
drivers/tty/serial/rsci.c | 3 -
drivers/tty/serial/sc16is7xx.c | 9 +-
drivers/tty/serial/serial_core.c | 167 +-
drivers/tty/serial/serial_mctrl_gpio.c | 3 -
drivers/tty/serial/sh-sci.c | 2 -
drivers/tty/serial/sprd_serial.c | 5 +-
drivers/tty/tty_io.c | 6 +-
drivers/tty/tty_jobctrl.c | 41 +-
drivers/tty/vt/vc_screen.c | 6 +-
drivers/tty/vt/vt_ioctl.c | 2 +
include/linux/goldfish.h | 24 -
include/linux/serial_8250.h | 17 +-
include/linux/serial_core.h | 9 +
include/trace/events/qcom_geni_serial.h | 7 +-
include/uapi/linux/serial.h | 1 +
include/uapi/linux/serial_core.h | 3 +
81 files changed, 2061 insertions(+), 4726 deletions(-)
delete mode 100644 drivers/tty/ipwireless/Makefile
delete mode 100644 drivers/tty/ipwireless/hardware.c
delete mode 100644 drivers/tty/ipwireless/hardware.h
delete mode 100644 drivers/tty/ipwireless/main.c
delete mode 100644 drivers/tty/ipwireless/main.h
delete mode 100644 drivers/tty/ipwireless/network.c
delete mode 100644 drivers/tty/ipwireless/network.h
delete mode 100644 drivers/tty/ipwireless/setup_protocol.h
delete mode 100644 drivers/tty/ipwireless/tty.c
delete mode 100644 drivers/tty/ipwireless/tty.h
create mode 100644 drivers/tty/serial/8250/8250_mxpcie.c
next reply other threads:[~2026-08-25 14:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-25 14:27 Greg KH [this message]
2026-08-25 19:50 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ao2masQJ22TNPd12@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®