From: Frank Li <Frank.li@oss.nxp.com>
To: Fabio Estevam <festevam@gmail.com>
Cc: broonie@kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, Fabio Estevam <festevam@nabladev.com>
Subject: Re: [PATCH v2 1/2] regulator: pca9450: Use LDO5 low-control enable mask
Date: Tue, 18 Aug 2026 14:31:19 -0500 [thread overview]
Message-ID: <aoSzB-_AuwMdJmDP@SMW015318> (raw)
In-Reply-To: <20260818014059.351152-1-festevam@gmail.com>
On Mon, Aug 17, 2026 at 10:40:58PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@nabladev.com>
>
> LDO5 has voltage-selection fields in both LDO5CTRL_L and LDO5CTRL_H,
> selected by the SD_VSEL pin. Its ENMODE field, however, is only in
> LDO5CTRL_L.
>
> The regulator descriptors correctly use LDO5CTRL_L as enable_reg, but
> use the misleading LDO5H_EN_MASK name for enable_mask. Both mask
> definitions have the same value, so this causes no functional problem.
>
> Use LDO5L_EN_MASK in all LDO5 descriptors and remove the unused
> LDO5H_EN_MASK definition.
>
> Signed-off-by: Fabio Estevam <festevam@nabladev.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Changes since v1:
> - New patch clarifying that the LDO5 ENMODE field is in LDO5CTRL_L.
>
> drivers/regulator/pca9450-regulator.c | 6 +++---
> include/linux/regulator/pca9450.h | 1 -
> 2 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
> index c41db70fa052..93d0af7f7eda 100644
> --- a/drivers/regulator/pca9450-regulator.c
> +++ b/drivers/regulator/pca9450-regulator.c
> @@ -621,7 +621,7 @@ static struct pca9450_regulator_desc pca9450a_regulators[] = {
> .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> .vsel_mask = LDO5HOUT_MASK,
> .enable_reg = PCA9450_REG_LDO5CTRL_L,
> - .enable_mask = LDO5H_EN_MASK,
> + .enable_mask = LDO5L_EN_MASK,
> .owner = THIS_MODULE,
> },
> },
> @@ -866,7 +866,7 @@ static struct pca9450_regulator_desc pca9450bc_regulators[] = {
> .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> .vsel_mask = LDO5HOUT_MASK,
> .enable_reg = PCA9450_REG_LDO5CTRL_L,
> - .enable_mask = LDO5H_EN_MASK,
> + .enable_mask = LDO5L_EN_MASK,
> .owner = THIS_MODULE,
> },
> },
> @@ -1086,7 +1086,7 @@ static struct pca9450_regulator_desc pca9451a_regulators[] = {
> .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> .vsel_mask = LDO5HOUT_MASK,
> .enable_reg = PCA9450_REG_LDO5CTRL_L,
> - .enable_mask = LDO5H_EN_MASK,
> + .enable_mask = LDO5L_EN_MASK,
> .owner = THIS_MODULE,
> },
> },
> diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
> index 0df8b3c48082..2aa73624d0b8 100644
> --- a/include/linux/regulator/pca9450.h
> +++ b/include/linux/regulator/pca9450.h
> @@ -210,7 +210,6 @@ enum {
> #define LDO5L_EN_MASK 0xC0
> #define LDO5LOUT_MASK 0x0F
>
> -#define LDO5H_EN_MASK 0xC0
> #define LDO5HOUT_MASK 0x0F
>
> /* PCA9450_REG_IRQ bits */
> --
> 2.43.0
>
>
next prev parent reply other threads:[~2026-08-18 19:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-18 1:40 Fabio Estevam
2026-08-18 1:40 ` [PATCH v2 2/2] regulator: pca9450: Support regulator-off-in-suspend Fabio Estevam
2026-08-18 19:31 ` Frank Li [this message]
2026-08-30 22:37 ` [PATCH v2 1/2] regulator: pca9450: Use LDO5 low-control enable mask Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aoSzB-_AuwMdJmDP@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=festevam@nabladev.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®