Re: [PATCH 2/2] riscv: dts: sophgo: cv180x: Fix internal ephy node name

[Inochi Amaoto <inochiama@gmail.com>]

On Tue, Aug 04, 2026 at 12:34:24AM +0800, Chen-Yu Yeh wrote:
> The internal EPHY node is named "phy@0" while its reg property is <1>.
> The unit-address should match the first entry of the reg property, but
> this is not checked by dtc for MDIO buses. The kernel confirms the PHY
> is indeed at address 1:
> 
>   eth0: PHY [mdio_mux-0.0:01] driver [Generic PHY]
> 
> Rename the node to ethernet-phy@1, which also follows the common naming
> convention for ethernet PHY nodes.
> 
> Fixes: ba1abacc57cb ("riscv: dts: sophgo: Add mdio multiplexer device for cv18xx")
> 
> Signed-off-by: Chen-Yu Yeh <chenyou910331@gmail.com>
> ---
>  arch/riscv/boot/dts/sophgo/cv180x.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> index ec3bf305274a..cf672cc6b935 100644
> --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi
> @@ -71,7 +71,7 @@ internal_mdio: mdio@0 {
>  				#size-cells = <0>;
>  				reg = <0>;
>  
> -				internal_ephy: phy@0 {
> +				internal_ephy: phy@1 {
>  					compatible = "ethernet-phy-ieee802.3-c22";
>  					reg = <1>;
>  				};
> -- 
> 2.43.0
> 

Please send this with the same thread of PATCH 1. Otherwise, LGTM

Reviewed-by: Inochi Amaoto <inochiama@gmail.com>

Regards,
Inochi