Re: [PATCH v2 2/2] media: i2c: mira016: Add driver for Mira016

[Jacopo Mondi <jacopo.mondi@ideasonboard.com>]

Hi Sakari

On Mon, Sep 07, 2026 at 09:45:16AM +0200, Jacopo Mondi wrote:
> Hi Sakari, thanks for the review
>

[snip]

> > > +
> > > +static int mira016_parse_endpoint(struct device *dev, struct mira016 *mira016)
> > > +{
> > > +	struct fwnode_handle *endpoint __free(fwnode_handle) = NULL;
> > > +	struct v4l2_fwnode_endpoint ep_cfg = {
> > > +		.bus_type = V4L2_MBUS_CSI2_DPHY
> > > +	};
> > > +
> > > +	endpoint = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, 0);
> > > +	if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg))
> > > +		return dev_err_probe(dev, -EINVAL, "Failed to parse endpoint\n");
> >
> > Don't mask error codes! Just return the error code returned by
> > v4l2_fwnode_endpoint_alloc_parse().
> >
>
> With PTR_ERR() I presume
>
> > > +
> > > +	/*
> > > +	 * Link frequencies: the driver supports a single link frequency,
> > > +	 * no need to check bitmap after this call.
> > > +	 */
> > > +	if (v4l2_link_freq_to_bitmap(dev, ep_cfg.link_frequencies,
> > > +				     ep_cfg.nr_of_link_frequencies,
> > > +				     mira016_link_freqs,
> > > +				     ARRAY_SIZE(mira016_link_freqs),
> > > +				     &mira016->link_freq_bitmap)) {
> >
> > Ditto.
> >
> > > +		v4l2_fwnode_endpoint_free(&ep_cfg);
> > > +		return -EINVAL;
> > > +	}
> > > +
> > > +	/* TODO: Implement D-PHY configuration to support continuous clock. */
> > > +	if (!(ep_cfg.bus.mipi_csi2.flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK)) {
> > > +		v4l2_fwnode_endpoint_free(&ep_cfg);
> >
> > Instead of callind v4l2_fwnode_endpoint_free() here and above, I'd add a
> > label for error handling.
> >
>
> ack

I'll actually backtrack on this.

Sashiko pointed out that mixing gotos and cleanups is probably not a good idea
and this time, the bot is right.