Re: [PATCH v5 0/5] LoongArch: add KHO support and selftests

[Mike Rapoport <rppt@kernel.org>]

Hi George,

On Fri, Sep 04, 2026 at 06:08:47PM +0800, George Guo wrote:
> This series enables Kexec HandOver (KHO) on 64-bit LoongArch and adds
> LoongArch coverage to the KHO QEMU selftest.  KHO is the remaining
> architecture gate needed by Live Update (LUO) on LoongArch.
> 
> The transport is the central problem.  Arm64 and riscv can pass the KHO
> state FDT and scratch area through properties under /chosen in a boot
> FDT.  LoongArch boots through EFI without a boot FDT, so that path is not
> available.
> 
> EFI KHO channel:

I can't say I like "transport" and "channel" terminology. We don't send
anything anywhere.
 
> v5 reworks the EFI transport following Pratyush's and Huacai's reviews
> [1, 2].  Instead of rebuilding the EFI configuration table in
> LoongArch code and switching st->tables before kexec, the common EFI stub
> allocates and installs a persistent table under
> LINUX_EFI_KEXEC_HANDOVER_GUID.  This follows the model used by
> LINUX_EFI_MEMRESERVE_TABLE_GUID.
> 
> The common EFI table parser reserves the stub-allocated table, reads it
> during early boot, and calls kho_populate().  An early initcall keeps the
> table persistently mapped so it can also be updated on the crash kexec
> path.  The implementation is architecture-independent; LoongArch only
> selects EFI_KHO when KEXEC_HANDOVER is enabled.
> 
> The EFI table is global, but kexec can keep separate normal and crash
> images and can replace a loaded candidate.  Updating the table while a
> candidate image is being loaded could therefore leave it pointing at a
> failed candidate while the previously installed image remains the one
> that will be executed.  v5 records the KHO data in struct kimage and
> synchronizes the channel from the image selected for execution.  Images
> without KHO data, including legacy and crash images, clear the channel so
> the next kernel boots cold rather than reviving stale state.
> 
> The GUID name is changed to LINUX_EFI_KEXEC_HANDOVER_GUID as suggested by
> Huacai and Pratyush [3].  Existing x86 KHO support continues to use its
> setup_data transport.  Besides supporting non-UEFI boot, that entry is
> consumed by the x86 decompressor before normal EFI table parsing, so KASLR
> only uses KHO scratch areas and does not overwrite preserved memory.  The
> new channel is installed by the generic EFI-stub entry path and relies on
> EFI_GENERIC_STUB, which x86 does not select.  Moving x86 would therefore
> require installing the table from the x86-specific EFI stub and scanning it
> in the decompressor, not just selecting EFI_KHO.
> 
> LoongArch enablement and build fix:
> 
> The architecture patch now only enables ARCH_SUPPORTS_KEXEC_HANDOVER and
> selects the generic EFI channel.  No LoongArch setup reader, kexec writer,
> or EFI system-table replacement remains.
> 
> The linux/mm.h build fix is moved from luo_session.c to kho_block.c, where
> the virt_to_phys() and phys_to_virt() calls reside after the liveupdate
> refactoring.  This addresses Pratyush's review [4].  Adding linux/mm.h to
> asm/io.h was previously attempted, but creates an include cycle under
> CONFIG_KFENCE [5].  The fix precedes LoongArch enablement so every
> intermediate commit builds with CONFIG_KFENCE=y.
> 
> Selftest:
> 
> The LoongArch vmtest boots vmlinux.efi through EDK2 because the initial
> EFI stub invocation installs the channel being tested.  QEMU_EFI can
> override the firmware filename for distributions that install it under a
> different name or path.
> 
> CONFIG_ACPI_SPCR_TABLE lets the bare earlycon parameter obtain the UART
> description from EDK2's SPCR table.  CONFIG_PCI_HOST_GENERIC keeps i8042
> enabled while ensuring that the QEMU virt machine's PCI I/O space is
> mapped before the legacy fallback probe, addressing Huacai's concern that
> the same kernel configuration should remain usable for hosts and guests.
> 
> With EFI runtime reset services available, panic=-1 and QEMU's existing
> -no-reboot option terminate the test normally.  The generic QEMU runner
> therefore remains unchanged and does not mask failures by forcibly
> terminating QEMU after a timeout.
> 
> The LoongArch vmtest uses the default KHO scratch-sizing path.  This
> series is based on the generic fix that calculates per-node scratch sizes
> before scratch allocation [6].

The text here and in the patches changelog reads reads as LLM-generated
text. First, it's quite blind and unreadable with wall-to-wall text.
Second, LLMs tend to describe what they did in the context of a session,
but since we apply the cover letter to the liveupdate tree, the description
here should *only* describe why the changes are required and how they are
implemented. The history belongs to changes since vN-1 section.

And last, but not least, please add LLM attribution as per 

https://docs.kernel.org/process/coding-assistants.html#attribution
 
> The KHO vmtest passes on:
> 
>   * LoongArch with KVM using QEMU_EFI.fd from edk2-loongarch64.
>   * x86_64 with KVM, as regression coverage for the generic kexec/KHO
>     changes.
> 
> Patch layout:
> 
>   1. Add the generic EFI KHO channel and its ABI.
>   2. Synchronize the channel from the selected image at execution.
>   3. Fix the kho_block.c header dependency exposed by LoongArch/KFENCE.
>   4. Enable KHO on 64-bit LoongArch through the generic EFI channel.
>   5. Add LoongArch to the KHO QEMU selftest.
> 
> Changes since v4:
> 
>   * Allocate and install the KHO table from the common EFI stub, following
>     the EFI memreserve-table model (Pratyush).
>   * Parse, reserve, map, and update the channel in generic EFI code; remove
>     the LoongArch-specific reader, writer, and st->tables replacement
>     (Pratyush, Huacai).
>   * Synchronize the global channel at execution rather than image load;
>     clear it for cold and crash images and use the scratch payload size.
>   * Rename the GUID to LINUX_EFI_KEXEC_HANDOVER_GUID (Huacai, Pratyush).
>   * Move the linux/mm.h include from luo_session.c to the actual caller,
>     kho_block.c, and place the fix before architecture enablement
>     (Pratyush, Huacai).
>   * Boot the vmtest through EDK2, allow QEMU_EFI to override the firmware,
>     and use vmlinux.efi to exercise the EFI stub and channel.
>   * Keep i8042 enabled and select PCI_HOST_GENERIC instead of disabling
>     the host configuration in the selftest (Huacai).
>   * Enable ACPI_SPCR_TABLE and use the SPCR-provided early console.
>   * Exercise the default KHO scratch-sizing path in the LoongArch vmtest;
>     depend on the separately posted generic sizing fix [6].
>   * Drop the generic QEMU timeout now that EFI runtime reset services make
>     the LoongArch guest terminate normally.
>   * Rebase onto Linux 7.3-rc1.
> 
> [1] Pratyush Yadav:
>     https://lore.kernel.org/r/2vxzo6f96fmn.fsf@kernel.org/
> [2] Huacai Chen:
>     https://lore.kernel.org/r/CAAhV-H4PKRNCa4g=6TGepP+trtM82JiMoWgVr3O7PqbZYP9uGw@mail.gmail.com/
> [3] https://lore.kernel.org/r/2vxzse4m54nz.fsf@kernel.org/
> [4] https://lore.kernel.org/r/2vxzfr0l6fam.fsf@kernel.org/
> [5] https://lore.kernel.org/r/202605211925.DbDvQ6ii-lkp@intel.com/
> [6] https://lore.kernel.org/loongarch/20260904025101.9959-1-dongtai.guo@linux.dev/
> 
> Previous version:
> 
> v4: https://lore.kernel.org/loongarch/20260807103714.33074-1-dongtai.guo@linux.dev/
> 
> George Guo (5):
>   efi: add a KHO configuration table channel
>   liveupdate: synchronize EFI KHO channel at execution
>   liveupdate: kho_block: include linux/mm.h for virt/phys translation
>   LoongArch: enable kexec handover (KHO)
>   selftests/kho: add LoongArch vmtest support
> 
>  arch/loongarch/Kconfig                     |  4 ++
>  drivers/firmware/efi/Kconfig               | 12 ++++
>  drivers/firmware/efi/efi.c                 | 78 ++++++++++++++++++++++
>  drivers/firmware/efi/libstub/efi-stub.c    | 25 +++++++
>  include/linux/efi.h                        | 36 ++++++++++
>  kernel/crash_core.c                        |  7 ++
>  kernel/kexec_core.c                        |  5 ++
>  kernel/kexec_internal.h                    |  3 +
>  kernel/liveupdate/kexec_handover.c         | 33 +++++++++
>  kernel/liveupdate/kho_block.c              |  1 +
>  tools/testing/selftests/kho/loongarch.conf | 11 +++
>  tools/testing/selftests/kho/vmtest.sh      |  3 +-
>  12 files changed, 217 insertions(+), 1 deletion(-)
>  create mode 100644 tools/testing/selftests/kho/loongarch.conf
> 
> 
> base-commit: cee9395acd8043be0644b25c34bfa86623f2b935
> prerequisite-patch-id: a2f06addb17cc379b9f98674f087a1642588dc6e
> -- 
> 2.53.0

-- 
Sincerely yours,
Mike.