From: "Jason A. Donenfeld" <Jason@zx2c4.com>
To: ramses@well-founded.dev
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Martin KaFai Lau <kafai@fb.com>,
wireguard@lists.zx2c4.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] wireguard: queueing: preserve tstamp_type in wg_reset_packet()
Date: Thu, 27 Aug 2026 15:35:33 +0200 [thread overview]
Message-ID: <apA9JU3TAXdSNYJi@zx2c4.com> (raw)
In-Reply-To: <20260827-wg-tstamp-v1-1-4acfebb855ef@well-founded.dev>
On Thu, Aug 27, 2026 at 01:52:56PM +0200, Ramses de Norre via B4 Relay wrote:
> From: Ramses de Norre <ramses@well-founded.dev>
>
> Sending traffic through a wireguard tunnel on a host using the fq
> qdisc fills the log with:
>
> fq: likely mono tstamp with tstamp_type 0
>
> An skb carries a timestamp in skb->tstamp and, separately, a
> skb->tstamp_type field recording which clock that timestamp came from.
> The two have to agree.
>
> When wireguard encapsulates a packet it calls wg_reset_packet(), which
> clears the fields that must not leak from the inner packet into the
> tunnel packet. It does so in two steps:
>
> skb_scrub_packet(skb, true);
> memset(&skb->headers, 0, sizeof(skb->headers));
>
> skb_scrub_packet() deliberately keeps skb->tstamp when it holds a
> monotonic timestamp: that value is the time the packet is scheduled to
> be sent, and the qdisc still needs it. The memset then zeroes
> skb->tstamp_type, because that field sits inside the headers group
> while skb->tstamp does not. The packet therefore leaves wireguard
> carrying a monotonic timestamp labelled as a realtime one.
>
> Nothing noticed until commit c4f796c4f16b ("net_sched: sch_fq: convert
> skb->tstamp if not monotonic"): fq used to assume every timestamp was
> monotonic. It now consults tstamp_type, spots the mismatch, warns, and
> falls back to treating the value as monotonic. Pacing still ends up
> correct, so the log spam is the actual problem.
>
> Save tstamp_type before the memset and restore it when encapsulating,
> next to the hash fields that are already carried over this way. When
> decapsulating it stays zeroed, which is right: an incoming packet's
> timestamp is a realtime receive timestamp.
>
> Fixes: de799101519a ("net: Add skb_clear_tstamp() to keep the mono delivery_time")
> Signed-off-by: Ramses de Norre <ramses@well-founded.dev>
> ---
> drivers/net/wireguard/queueing.h | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireguard/queueing.h b/drivers/net/wireguard/queueing.h
> index 79b6d70de236b..663b19b783953 100644
> --- a/drivers/net/wireguard/queueing.h
> +++ b/drivers/net/wireguard/queueing.h
> @@ -78,12 +78,14 @@ static inline void wg_reset_packet(struct sk_buff *skb, bool encapsulating)
> u8 l4_hash = skb->l4_hash;
> u8 sw_hash = skb->sw_hash;
> u32 hash = skb->hash;
> + u8 tstamp_type = skb->tstamp_type;
> skb_scrub_packet(skb, true);
> memset(&skb->headers, 0, sizeof(skb->headers));
> if (encapsulating) {
> skb->l4_hash = l4_hash;
> skb->sw_hash = sw_hash;
> skb->hash = hash;
> + skb->tstamp_type = tstamp_type;
> }
> skb->queue_mapping = 0;
> skb->nohdr = 0;
Seems reasonable to me. I'll put this through the paces testing and
queue it up when I'm back at my laptop on Monday.
Jason
prev parent reply other threads:[~2026-08-27 13:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 11:52 Ramses de Norre via B4 Relay
2026-08-27 13:28 ` Toke Høiland-Jørgensen
2026-08-27 13:32 ` Eric Dumazet
2026-08-27 13:35 ` Jason A. Donenfeld [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apA9JU3TAXdSNYJi@zx2c4.com \
--to=jason@zx2c4.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kafai@fb.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ramses@well-founded.dev \
--cc=wireguard@lists.zx2c4.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®